Publications

Journal Articles

N.B. The list below is automatically compiled by the FAU’s Current Research Information System (CRIS) service. Externally hosted publication lists for individual LFG professors, past and present, can be found at:

Scopus (Bück, Diwald, Klupp Taylor, Molerus, Peukert, Vogel, Wirth)
ResearchGate (Bück, Klupp Taylor, Peukert, Vogel)
Google Scholar (Klupp Taylor, Vogel)

Du J., Strenzke G., Bück A., Tsotsas E.:
Monte Carlo modeling of spray agglomeration in a cylindrical fluidized bed: From batch-wise to continuous processes
In: Powder Technology 396 (2022), p. 113-126
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2021.10.051
Roy N., Dürr R., Bück A., Kumar J., Sundar S.:
Numerical methods for particle agglomeration and breakage in lid-driven cavity flows at low Reynolds numbers
In: Mathematics and Computers in Simulation 192 (2022), p. 33-49
ISSN: 0378-4754
DOI: 10.1016/j.matcom.2021.08.015
Schikarski T., Avila M., Peukert W.:
En route towards a comprehensive dimensionless representation of precipitation processes
In: Chemical Engineering Journal 428 (2022), p. 131984
ISSN: 1385-8947
DOI: 10.1016/j.cej.2021.131984

Ahmad R., Saddiqi NuH., Wu M., Prato M., Spiecker E., Peukert W., Distaso M.:
Phase evolution of Cu2ZnSnS4 (CZTS) nanoparticles from in situ formed binary sulphides under solvothermal conditions
In: Crystengcomm (2021)
ISSN: 1466-8033
DOI: 10.1039/d0ce01566k
Akhtar MA., Hadzhieva Z., Ilyas K., Ali MS., Peukert W., Boccaccini AR.:
Facile Synthesis of Gallium (III)-Chitosan Complexes as Antibacterial Biomaterial
In: Pharmaceutics 13 (2021)
ISSN: 1999-4923
DOI: 10.3390/pharmaceutics13101702
Behmadi R., Mokhtarian M., Ghadrian K., Davoodi A., Hosseinpour S.:
Development of a low-cost activated mesoporous bauxite for the reclamation of used transformer oil
In: Separation and Purification Technology (2021), p. 119826
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2021.119826
Blackwell R., Hemmerle A., Baer A., Späth M., Peukert W., Parsons D., Sengupta K., Smith AS.:
On the control of dispersion interactions between biological membranes and protein coated biointerfaces
In: Journal of Colloid and Interface Science 598 (2021), p. 464-473
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2021.02.078
Canziani H., Bever F., Sommereyns A., Schmidt M., Vogel N.:
Roughly Spherical: Tailored PMMA-SiO 2 Composite Supraparticles with Optimized Powder Flowability for Additive Manufacturing
In: ACS Applied Materials and Interfaces (2021)
ISSN: 1944-8244
DOI: 10.1021/acsami.1c02264
Chen Z., Li L., Zhang Z., Li H., Xie B., Chen Y., Davoodi A., Hosseinpour S., Liu W.:
“Sticky” carbon coating enables high-area-capacity lithium storage of silicon-graphitic carbon hybrid
In: Carbon (2021)
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2021.07.097
Chiera S., Bittner C., Vogel N.:
Substrate-Independent Design of Liquid-Infused Slippery Surfaces via Mussel-Inspired Chemistry
In: Advanced Materials Interfaces (2021)
ISSN: 2196-7350
DOI: 10.1002/admi.202100156
Ciarella S., Rey M., Harrer J., Holstein N., Ickler M., Löwen H., Vogel N., Janssen LMC.:
Soft Particles at Liquid Interfaces: From Molecular Particle Architecture to Collective Phase Behavior.
In: Langmuir 37 (2021), p. 5364-5375
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.1c00541
Dechet M., Gomez Bonilla JS., Grünewald M., Popp K., Rudloff J., Lang M., Schmidt J.:
A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability
In: Materials & Design 197 (2021), Article No.: 109265
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.109265
Dehghani S., Mashreghi M., Noorbakhsh Nezhad AH., Karimi J., Hosseinpour S., Davoodi A.:
Exploring mechano-bactericidal nature of Psalmocharias cicadas wings: an analytical nanotopology investigation based on atomic force microscopy characterization
In: Surfaces and Interfaces 26 (2021), Article No.: 101407
ISSN: 2468-0230
DOI: 10.1016/j.surfin.2021.101407
Dienstbier J., Aigner KM., Rolfes J., Peukert W., Segets D., Pflug L., Liers F.:
Robust Optimization in Nanoparticle Technology: A Proof of Principle by Quantum Dot Growth in a Residence Time Reactor
In: Computers & Chemical Engineering (2021)
ISSN: 0098-1354
URL: http://www.optimization-online.org/DB_HTML/2021/02/8262.html
Du J., Chen K., Bück A., Tsotsas E.:
Stochastic simulation of spray agglomeration process in a continuously operated horizontal fluidized bed by Monte Carlo method
13th International Conference on Fluidized Bed Technology, CFB 2021 (Vancouver, hosted Online, 10. May 2021 - 14. May 2021)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85110834465&origin=inward
Döhler D., Triana Merlo AD., Büttner P., Scheler F., Görlitzer E., Harrer J., Vasileva AA., Ali E., Gruber W., Unruh T., Manshina AA., Vogel N., Bachmann J., Minguez Bacho I.:
A Self‐Ordered Nanostructured Transparent Electrode of High Structural Quality and Corresponding Functional Performance
In: Small NA (2021), Article No.: 202100487
ISSN: 1613-6829
DOI: 10.1002/smll.202100487
URL: https://onlinelibrary.wiley.com/doi/10.1002/smll.202100487
Esper J., Helmer A., Wu Y., Bachmann J., Klupp Taylor R.:
Electrophoretic Deposition of Out‐of‐Plane Oriented Active Material for Lithium‐Ion Batteries
In: Energy Technology (2021)
ISSN: 2194-4288
DOI: 10.1002/ente.202000936
URL: https://onlinelibrary.wiley.com/doi/10.1002/ente.202000936
Frank U., Uttinger M., Wawra S., Lübbert C., Peukert W.:
Progress in Multidimensional Particle Characterization
In: KONA Powder and Particle Journal (2021)
ISSN: 2187-5537
DOI: 10.14356/kona.2022005
Fujiwara J., Yokoyama A., Seike M., Vogel N., Rey M., Oyama K., Hirai T., Nakamura Y., Fujii S.:
Boxes fabricated from plate-stabilized liquid marbles
In: Materials Advances (2021)
ISSN: 2633-5409
DOI: 10.1039/d1ma00398d
Galvan Y., Bauernfeind J., Wolf P., Zarraga R., Haumann M., Vogel N.:
Materials with Hierarchical Porosity Enhance the Stability of Infused Ionic Liquid Films
In: ACS Omega 6 (2021), p. 20956-20965
ISSN: 2470-1343
DOI: 10.1021/acsomega.1c02405
Ghosh AK., Sarkar S., Nebel LJ., Aftenieva O., Gupta V., Sander O., Das A., Joseph J., Wiessner S., Koenig TAF., Fery A.:
Exploring Plasmonic Resonances Toward "Large-Scale" Flexible Optical Sensors with Deformation Stability
In: Advanced Functional Materials (2021)
ISSN: 1616-301X
DOI: 10.1002/adfm.202101959
Gomez Bonilla JS., Düsenberg B., Lanyi F., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating
In: Plasma Processes and Polymers (2021)
ISSN: 1612-8850
DOI: 10.1002/ppap.202000247
Guckeisen T., Hosseinpour S., Peukert W.:
Effect of pH and urea on the proteins secondary structure at the water/air interface and in solution
In: Journal of Colloid and Interface Science 590 (2021), p. 38-49
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2021.01.015
Gupta V., Sarkar S., Aftenieva O., Tsuda T., Kumar L., Schletz D., Schultz J., Kiriy A., Fery A., Vogel N., König TA.:
Nanoimprint Lithography Facilitated Plasmonic-Photonic Coupling for Enhanced Photoconductivity and Photocatalysis
In: Advanced Functional Materials (2021), Article No.: 2105054
ISSN: 1616-301X
DOI: 10.1002/adfm.202105054
Gómez Bonilla JS., Unger L., Schmidt J., Peukert W., Bück A.:
Particle Lagrangian CFD Simulation and Experimental Characterization of the Rounding of Polymer Particles in a Downer Reactor with Direct Heating
In: Processes 9 (2021), Article No.: 916
ISSN: 2227-9717
DOI: 10.3390/pr9060916
Görlitzer E., Puri AS., Moses JJ., Poulikakos LV., Vogel N.:
The Beginner's Guide to Chiral Plasmonics: Mostly Harmless Theory and the Design of Large-Area Substrates
In: Advanced Optical Materials (2021)
ISSN: 2195-1071
DOI: 10.1002/adom.202100378
Harrer J., Ciarella S., Rey M., Loewen H., Janssen LMC., Vogel N.:
Collapse-induced phase transitions in binary interfacial microgel monolayers
In: Soft Matter 17 (2021), p. 4504-4516
ISSN: 1744-683X
DOI: 10.1039/d1sm00318f
Hegetschweiler A., Jochem AR., Zimmermann A., Walter J., Staudt T., Kraus T.:
Colloidal Analysis of Particles Extracted from Microalloyed Steels
In: Particle & Particle Systems Characterization (2021)
ISSN: 0934-0866
DOI: 10.1002/ppsc.202000236
Herre P., Will J., Dierner M., Wang D., Yokosawa T., Zech TS., Wu M., Przybilla T., Romeis S., Unruh T., Peukert W., Spiecker E.:
Rapid fabrication and interface structure of highly faceted epitaxial Ni-Au solid solution nanoparticles on sapphire
In: Acta Materialia 220 (2021), p. 117318
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2021.117318
Hesse N., Winzer B., Peukert W., Schmidt J.:
Towards a generally applicable methodology for the characterization of particle properties relevant to processing in powder bed fusion of polymers – from single particle to bulk solid behavior
In: Additive Manufacturing (2021), p. 101957
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.101957
Heyn TR., Uttinger M., Kwade A., Peukert W., Keppler JK., Schwarz K.:
Whey protein (amyloid)-aggregates in oil-water systems: The process-related comminution effect
In: Journal of Food Engineering 311 (2021), Article No.: 110730
ISSN: 0260-8774
DOI: 10.1016/j.jfoodeng.2021.110730
Hosseinpour S., Davoodi A., Sedighi A., Tofighi F.:
Analytical Techniques for Corrosion-Related Characterization of Graphene and Graphene-Based Nanocomposite Coatings
In: Hatem M.A. Amin, Ahmed Galal (ed.): Corrosion Protection of Metals and Alloys Using Graphene and Biopolymer Based Nanocomposites, Boca Raton: CRC Press, 2021
ISBN: 9781315171364
DOI: 10.1201/9781315171364
Hosseinpour S., Götz V., Peukert W.:
Effect of surfactants on the molecular structure of the buried oil/water interface
In: Angewandte Chemie International Edition (2021), Article No.: anie.202110091
ISSN: 1433-7851
DOI: 10.1002/anie.202110091
Jafari HR., Davoodi A., Hosseinpour S.:
Effect of Fluid Flow on the Corrosion Performance of as-Cast and Heat-Treated Nickel Aluminum Bronze Alloy (UNS C95800) in Saline Solution
In: Corrosion and Materials Degradation (2021)
ISSN: 2624-5558
DOI: 10.3390/cmd2010004
URL: https://www.mdpi.com/2624-5558/2/1/4
Jaksch A., Hesse N., Schmidt J., Drummer D.:
Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften
Rapid.Tech 2021 (, 22. June 2021 - 23. June 2021)
In: Proceedings of the 17th Rapid.Tech Conference 2021
Kamali M., Hosseinpour S., Swann J., Sareh HP., Mahmoudi M.:
Mobbing in Academia
In: Mahmoudi, Morteza (ed.): A Brief Guide to Academic Bullying, Jenny Stanford Publishing, 2021, p. 45-60
ISBN: 9781003160342
Keppler JK., Heyse A., Scheidler E., Uttinger M., Fitzner L., Jandt U., Heyn TR., Lautenbach V., Loch JI., Lohr J., Kieserling H., Günther G., Kempf E., Grosch JH., Lewiński K., Jahn D., Lübbert C., Peukert W., Kulozik U., Drusch S., Krull R., Schwarz K., Biedendieck R.:
Towards recombinantly produced milk proteins: Physicochemical and emulsifying properties of engineered whey protein beta-lactoglobulin variants
In: Food Hydrocolloids 110 (2021), Article No.: 106132
ISSN: 0268-005X
DOI: 10.1016/j.foodhyd.2020.106132
Khajavian E., Attar MR., Mohammadi-Zahrani E., Liu W., Davoodi A., Hosseinpour S.:
Tuning surface wettability of Al and its correlation with short and long term corrosion resistance in saline solutions
In: Surface & Coatings Technology (2021), p. 127950
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2021.127950
Kieserling H., Giefer P., Uttinger M., Lautenbach V., Nguyen T., Sevenich R., Lübbert C., Rauh C., Peukert W., Fritsching U., Drusch S., Maria Wagemans A.:
Structure and adsorption behavior of high hydrostatic pressure-treated β-lactoglobulin
In: Journal of Colloid and Interface Science 596 (2021), p. 173-183
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2021.03.051
Klupp Taylor R.:
The Properties of Iron Oxide Nanoparticle Pigments
In: Diwald, Oliver; Berger, Thomas (ed.): Metal oxide nanoparticles - Formation, functional properties, and interfaces, Hoboken NJ USA: Wiley, 2021
ISBN: 978-1-119-43674-4
URL: https://www.wiley-vch.de/de?option=com_eshop&view=product&isbn=9781119436744&title=Metal Oxide Nanoparticles
Kolker J., Harrer J., Ciarella S., Rey M., Ickler M., Janssen LM., Vogel N., Löwen H.:
Interface-induced hysteretic volume phase transition of microgels: simulation and experiment
In: Soft Matter (2021)
ISSN: 1744-683X
DOI: 10.1039/d1sm00111f
Lautenbach V., Hosseinpour S., Peukert W.:
Isoelectric Point of Proteins at Hydrophobic Interfaces
In: Frontiers in Chemistry 9 (2021), Article No.: 712978
ISSN: 2296-2646
DOI: 10.3389/fchem.2021.712978
Lübbert C., Peukert W.:
Characterization of Electrospray Drop Size Distributions by Mobility-Classified Mass Spectrometry: Implications for Ion Clustering in Solution and Ion Formation Pathways
In: Analytical Chemistry 93 (2021), p. 12862-12871
ISSN: 0003-2700
DOI: 10.1021/acs.analchem.1c00727
Meincke T., Walter J., Pflug L., Thajudeen T., Völkl A., Cardenas Lopez P., Uttinger M., Stingl M., Watanabe S., Peukert W., Klupp Taylor R.:
Determination of the yield, mass and structure of silver patches on colloidal silica using multiwavelength analytical ultracentrifugation
In: Journal of Colloid and Interface Science (2021)
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2021.08.161
Meiser E., Mohammadi R., Vogel N., Holcman D., Fenz S.:
A single-molecule approach to systematically study the narrow escape problem in micro-patterned model membranes
In: EUROPEAN BIOPHYSICS JOURNAL WITH BIOPHYSICS LETTERS, NEW YORK: 2021
Michaud V., Pracht J., Schilfarth F., Damm C., Platzer B., Haines P., Harreiss C., Guldi DM., Spiecker E., Peukert W.:
Well-separated water-soluble carbon dots via gradient chromatography
In: Nanoscale (2021)
ISSN: 2040-3364
DOI: 10.1039/d1nr02562g
Okonkwo BO., Ming H., Wang J., Han EH., Rahimi E., Davoodi A., Hosseinpour S.:
A new method to determine the synergistic effects of area ratio and microstructure on the galvanic corrosion of LAS A508/309 L/308 L SS dissimilar metals weld
In: Journal of Materials Science & Technology 78 (2021), p. 38-50
ISSN: 1005-0302
DOI: 10.1016/j.jmst.2020.10.044
Otto E., Dürr R., Strenzke G., Palis S., Bück A., Tsotsas E., Kienle A.:
Kernel identification in continuous fluidized bed spray agglomeration from steady state data
In: Advanced Powder Technology (2021)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2021.05.028
Peters G., Wendler O., Böhringer D., Gostian AO., Müller S., Canziani H., Hesse N., Semmler M., Berry DA., Kniesburges S., Peukert W., Döllinger M.:
Human laryngeal mucus from the vocal folds: Rheological characterization by particle tracking microrheology and oscillatory shear rheology
In: Applied Sciences 11 (2021), Article No.: 3011
ISSN: 2076-3417
DOI: 10.3390/app11073011
Rahimi E., Offoiach R., Hosseinpour S., Davoodi A., Baert K., Lutz A., Terryn H., Lekka M., Fedrizzi L.:
Effect of hydrogen peroxide on bovine serum albumin adsorption on Ti6Al4V alloy: A scanning Kelvin probe force microscopy study
In: Applied Surface Science 563 (2021), Article No.: 150364
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2021.150364
Rau JV., De Stefanis A., Barbaro K., Fosca M., Yankova VG., Matassa R., Nottola SA., Nawaz Q., Ali MS., Peukert W., Boccaccini AR.:
Adipogenic, chondrogenic, osteogenic, and antimicrobial features of glass ceramic material supplemented with manganese
In: Journal of Non-Crystalline Solids 559 (2021), Article No.: 120709
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2021.120709
Rey M., Wendisch FJ., Görlitzer E., Tang J., Bader R., Bourret GR., Vogel N.:
Anisotropic silicon nanowire arrays fabricated by colloidal lithography
In: Nanoscale Advances (2021)
ISSN: 2516-0230
DOI: 10.1039/d1na00259g
Saha J., Bück A.:
Conservative finite volume schemes for multidimensional fragmentation problems
In: Mathematics 9 (2021), Article No.: 635
ISSN: 2227-7390
DOI: 10.3390/math9060635
Sajjadnejad M., Haghshenas SMS., Badr P., Setoudeh N., Hosseinpour S.:
Wear and tribological characterization of nickel matrix electrodeposited composites: A review
In: Wear 486-487 (2021), p. 204098
ISSN: 0043-1648
DOI: 10.1016/j.wear.2021.204098
Sajjadnejad M., Haghshenas SMS., Tavakoli Targhi V., Setoudeh N., Hadipour A., Moghanian A., Hosseinpour S.:
Wear behavior of alkaline pulsed electrodeposited nickel composite coatings reinforced by ZnO nanoparticles
In: Wear 468-469 (2021), Article No.: 203591
ISSN: 0043-1648
DOI: 10.1016/j.wear.2020.203591
Salbaum T., Galvan Y., Haumann M., Wasserscheid P., Zarraga R., Vogel N.:
Enduring liquid repellency through slippery ionic liquid-infused organogels
In: Journal of Materials Chemistry A 9 (2021), p. 2357-2366
ISSN: 2050-7488
DOI: 10.1039/d0ta10237g
Sarkar S., Gupta V., Tsuda T., Gour J., Singh A., Aftenieva O., Steiner AM., Hoffmann M., Kumar S., Fery A., Joseph J., Koenig TAF.:
Plasmonic Charge Transfers in Large-Scale Metallic and Colloidal Photonic Crystal Slabs
In: Advanced Functional Materials (2021)
ISSN: 1616-301X
DOI: 10.1002/adfm.202011099
Schmidt J., Dechet M.:
Flüssig-Flüssig-Phasentrennung und Fällung zur Herstellung neuartiger Ausgangsmaterialien für das pulverbettbasierte Schmelzen von Polymeren
17th Rapid.Tech 3D Conference (Erfurt, 22. June 2021 - 23. June 2021)
In: Proceedings of the 17th Rapid.Tech 3D Conference Erfurt, Germany, 22–23 June 2021 2021
DOI: 10.3139/9783446471733.001
Setter R., Riedel F., Peukert W., Schmidt J., Wudy K.:
Infiltration behavior of liquid thermosets in thermoplastic powders for additive manufacturing of polymer composite parts in a combined powder bed fusion process
In: Polymer Composites (2021)
DOI: 10.1002/pc.26221
Shahvaranfard F., Li N., Hosseinpour S., Hejazi S., Zhang K., Altomare M., Schmuki P., Brabec C.:
Comparison of the sputtered TiO2 anatase and rutile thin films as electron transporting layers in perovskite solar cells
In: Nano Select (2021)
ISSN: 2688-4011
DOI: 10.1002/nano.202100306
Sommereyns A., Gann S., Schmidt J., Chehreh AB., Luddecke A., Walther F., Goekce B., Barcikowski S., Schmidt M.:
Quality over quantity: How different dispersion qualities of minute amounts of nano-additives affect material properties in powder bed fusion of polyamide 12
In: Materials 14 (2021), Article No.: 5322
ISSN: 1996-1944
DOI: 10.3390/ma14185322
Stanzel M., Zhao L., Mohammadi Eslami R., Pardehkhorram R., Kunz U., Vogel N., Andrieu-Brunsen A.:
Simultaneous Nanolocal Polymer and In Situ Readout Unit Placement in Mesoporous Separation Layers
In: Analytical Chemistry (2021)
ISSN: 0003-2700
DOI: 10.1021/acs.analchem.0c04446
Strenzke G., Dürr R., Bück A., Kienle A., Tsotsas E.:
Experimental investigation of process behaviour of continuous fluidized bed spray agglomeration with internal classification
13th International Conference on Fluidized Bed Technology, CFB 2021 (Vancouver, hosted Online, 10. May 2021 - 14. May 2021)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85110831839&origin=inward
Söngen H., Schlegel SJ., Jaques YM., Tracey J., Hosseinpour S., Hwang D., Bechstein R., Bonn M., Foster AS., Kühnle A., Backus EH.:
Water Orientation at the Calcite-Water Interface
In: Journal of Physical Chemistry Letters 12 (2021), p. 7605-7611
ISSN: 1948-7185
DOI: 10.1021/acs.jpclett.1c01729
URL: https://pubs.acs.org/doi/10.1021/acs.jpclett.1c01729
Tesler A., Sannomiya T., Hejazi S., Mohammadi Eslami R., Vogel N., Altomare M., Schmuki P.:
Metallic nanoparticle-on-mirror: Multiple-band light harvesting and efficient photocurrent generation under visible light irradiation
In: Nano Energy 90 (2021), Article No.: 106609
ISSN: 2211-2855
DOI: 10.1016/j.nanoen.2021.106609
Thomele D., Baumann SO., Schneider J., Sternig A., Shulda S., Richards RM., Schwab T., Zickler GA., Bourret GR., Diwald O.:
Cubes to Cubes: Organization of MgO Particles into One-Dimensional and Two-Dimensional Nanostructures
In: Crystal Growth and Design (2021)
ISSN: 1528-7483
DOI: 10.1021/acs.cgd.1c00535
Uttinger M., Jung WDK., Dao TQN., Canziani H., Lübbert C., Vogel N., Peukert W., Harting J., Walter J.:
Probing sedimentation non-ideality of particulate systems using analytical centrifugation
In: Soft Matter (2021)
ISSN: 1744-683X
DOI: 10.1039/D0SM01805H
Vogel N., Wang J., Schwenger J., Feldner P., Ströbel A., Herre P., Romeis S., Peukert W., Merle B., Vogel N.:
Mechanics of colloidal supraparticles under compression
In: Science Advances 7 (2021), Article No.: eabj0954
ISSN: 2375-2548
DOI: 10.1126/sciadv.abj0954
Wang J., Hahn S., Amstad E., Vogel N.:
Tailored Double Emulsions Made Simple
In: Advanced Materials (2021), p. e2107338
ISSN: 0935-9648
DOI: 10.1002/adma.202107338
Wang J., Kang E., Sultan U., Merle B., Inayat A., Graczykowski B., Fytas G., Vogel N.:
Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles
In: Journal of Physical Chemistry C (2021)
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.1c06839
Westhauser F., Arango Ospina M., Losch S., Wilkesmann S., Lehner B., Ali MS., Peukert W., Boccaccini AR., Fellenberg J.:
Selective and caspase-independent cytotoxicity of bioactive glasses towards giant cell tumor of bone derived neoplastic stromal cells but not to bone marrow derived stromal cells.
In: Biomaterials 275 (2021), p. 120977
ISSN: 0142-9612
DOI: 10.1016/j.biomaterials.2021.120977
Zhang H., Wu J., Wan Y., Romeis S., Esper J., Peukert W., Zheng K., Boccaccini AR.:
Bioactive Glass Flakes as Innovative Fillers in Chitosan Membranes for Guided Bone Regeneration
In: Advanced Engineering Materials (2021), Article No.: 2101042
ISSN: 1438-1656
DOI: 10.1002/adem.202101042
Zhao W., Göthelid M., Hosseinpour S., Johansson MB., Li G., Leygraf C., Johnson CM.:
The nature of self-assembled octadecylphosphonic acid (ODPA) layers on copper substrates
In: Journal of Colloid and Interface Science 581 (2021), p. 816-825
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2020.07.058
Zhuo Y., Sun H., Uddin MH., Barr M., Wisser D., Roßmann P., Esper J., Tymek S., Döhler D., Peukert W., Hartmann M., Bachmann J.:
An additive-free silicon anode in nanotube morphology as a model lithium ion battery material
In: Electrochimica Acta 388 (2021), Article No.: 138522
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2021.138522

Ahmad R., Saddiqi NuH., Wu M., Prato M., Spiecker E., Peukert W., Distaso M.:
Effect of the Counteranion on the Formation Pathway of Cu2ZnSnS4 (CZTS) Nanoparticles under Solvothermal Conditions
In: Inorganic Chemistry 59 (2020), p. 1973-1984
ISSN: 0020-1669
DOI: 10.1021/acs.inorgchem.9b03338
Asaumi Y., Fujiwara J., Oyama K., Rey M., Vogel N., Hirai T., Nakamura Y., Fujii S.:
Synthesis of millimeter-sized polymer particles by seeded polymerization and their use as shape-designable liquid marble stabilizer
In: Chemistry Letters 49 (2020), p. 1282-1285
ISSN: 0366-7022
DOI: 10.1246/CL.200508
Asaumi Y., Rey M., Oyama K., Vogel N., Hirai T., Nakamura Y., Fujii S.:
Effect of Stabilizing Particle Size on the Structure and Properties of Liquid Marbles
In: Langmuir (2020), p. 13274-13284
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.0c02265
Asaumi Y., Rey M., Vogel N., Nakamura Y., Fujii S.:
Particle Monolayer-Stabilized Light-Sensitive Liquid Marbles from Polypyrrole-Coated Microparticles
In: Langmuir 36 (2020), p. 2695-2706
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.0c00061
Attar MR., Mohammadi M., Taheri A., Hosseinpour S., Pasandideh-fard M., Haddad Sabzevar M., Davoodi A.:
Heat transfer enhancement of conventional aluminum heat sinks with an innovative, cost-effective, and simple chemical roughening method
In: Journal of Thermal Science and Engineering Applications (2020), p. 100742
ISSN: 1948-5085
DOI: 10.1016/j.tsep.2020.100742
URL: https://www.sciencedirect.com/science/article/pii/S2451904920302626?via=ihub
Bachmann P., Chen K., Bück A., Tsotsas E.:
Prediction of particle size and layer-thickness distributions in a continuous horizontal fluidized-bed coating process
In: Particuology 50 (2020), p. 1-12
ISSN: 1674-2001
DOI: 10.1016/j.partic.2019.06.005
Bioucas F., Rausch MH., Schmidt J., Bück A., Koller TM., Fröba AP.:
Effective Thermal Conductivity of Nanofluids: Measurement and Prediction
In: International Journal of Thermophysics 41 (2020), Article No.: 55
ISSN: 0195-928X
DOI: 10.1007/s10765-020-2621-2
Büttner P., Döhler D., Korenko S., Moehrlein S., Bochmann S., Vogel N., Minguez-Bacho I., Bachmann J.:
Solid state interdigitated Sb(2)S(3)based TiO(2)nanotube solar cells
In: RSC Advances 10 (2020), p. 28225-28231
ISSN: 2046-2069
DOI: 10.1039/d0ra04123h
Büttner P., Döhler D., Korenko S., Möhrlein S., Bochmann S., Vogel N., Minguez Bacho I., Bachmann J.:
Solid state interdigitated Sb(2)S(3)based TiO(2)nanotube solar cells
In: RSC Advances 10 (2020), p. 28225-28231
ISSN: 2046-2069
DOI: 10.1039/d0ra04123h
Canziani H., Chiera S., Schuffenhauer T., Kopp SP., Metzger F., Bück A., Schmidt M., Vogel N.:
Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing
In: Small (2020), Article No.: 2002076
ISSN: 1613-6829
DOI: 10.1002/smll.202002076
Das A., Bück A., Kumar J.:
Selection function in breakage processes: PBM and Monte Carlo modeling
In: Advanced Powder Technology 31 (2020), p. 1457-1469
ISSN: 0921-8831
DOI: 10.1016/j.apt.2020.01.002
Dechet M., Baumeister I., Schmidt J.:
Development of polyoxymethylene particles via the solution-dissolution process and application to the powder bed fusion of polymers
In: Materials 13 (2020), Article No.: 1535
ISSN: 1996-1944
DOI: 10.3390/ma13071535
Dechet M., Demina A., Römling L., Gomez Bonilla JS., Lanyi F., Schubert DW., Bück A., Peukert W., Schmidt J.:
Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers
In: Additive Manufacturing 32 (2020), Article No.: 100966
ISSN: 2214-7810
DOI: 10.1016/j.addma.2019.100966
Dechet M., Schmidt J.:
On the development of polymer particles for laser powder bed fusion via precipitation
In: Procedia CIRP 94 (2020), p. 95-99
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.019
Du J., Bück A., Tsotsas E.:
Influence of process variables on spray agglomeration process in a continuously operated horizontal fluidized bed
In: Powder Technology 363 (2020), p. 195-206
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2020.01.008
Duerr R., Bück A.:
Approximate Moment Methods for Population Balance Equations in Particulate and Bioengineering Processes
In: Processes 8 (2020)
ISSN: 2227-9717
DOI: 10.3390/pr8040414
Dyrney AdS., Baluni S., Bück A.:
Eulerian Multiphase Simulation of the Particle Dynamics in a Fluidized Bed Opposed Gas Jet Mill
In: Processes 8 (2020), Article No.: 1621
ISSN: 2227-9717
DOI: 10.3390/pr8121621
Dürr R., Bück A.:
Influence of moisture control on activity in continuous fluized bed drying of baker’s yeast pellets
In: Drying Technology (2020)
ISSN: 0737-3937
DOI: 10.1080/07373937.2020.1828449
Dürr R., Neugebauer C., Palis S., Bück A., Kienle A.:
Inferential control of product properties for fluidized bed spray granulation layering
21st IFAC World Congress 2020 (, 12. July 2020 - 17. July 2020)
DOI: 10.1016/j.ifacol.2020.12.576
Embrechts HE., Hartmann M., Peukert W., Distaso M.:
In Situ Monitoring of Particle Formation with Spectroscopic and Analytical Techniques Under Solvothermal Conditions
In: Chemical Engineering & Technology (2020)
ISSN: 0930-7516
DOI: 10.1002/ceat.201900520
Embrechts HE., Kriesten M., Ermer M., Peukert W., Hartmann M., Distaso M.:
In situ Raman and FTIR spectroscopic study on the formation of the isomers MIL-68(Al) and MIL-53(Al)
In: RSC Advances 10 (2020), p. 7336-7348
ISSN: 2046-2069
DOI: 10.1039/c9ra09968a
Embrechts HE., Kriesten M., Ermer M., Peukert W., Hartmann M., Distaso M.:
Role of Prenucleation Building Units in Determining Metal-Organic Framework MIL-53(Al) Morphology
In: Crystal Growth and Design 20 (2020), p. 3641-3649
ISSN: 1528-7483
DOI: 10.1021/acs.cgd.9b01384
Embrechts HE., Zhang S., Hock R., Peukert W., Distaso M.:
Observing Oriented Attachment during Mesocrystal Growth with in Situ Dynamic Light Scattering (DLS)
In: Crystal Growth & Design 20 (2020), p. 1266-1275
ISSN: 1528-7483
DOI: 10.1021/acs.cgd.9b01523
Esper J., Liu L., Willnauer J., Strobel A., Schwenger J., Romeis S., Peukert W.:
Scalable production of glass flakes via compression in the liquid phase
In: Advanced Powder Technology (2020)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2020.08.022
Esper J., Zhuo Y., Barr M., Yokosawa T., Spiecker E., de Ligny D., Bachmann J., Peukert W., Romeis S.:
Shape-anisotropic cobalt-germanium-borate glass flakes as novel Li-ion battery anodes
In: Powder Technology 363 (2020), p. 218-231
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2019.11.063
Furat O., Frank U., Weber M., Wawra S., Peukert W., Schmidt V.:
Estimation of bivariate probability distributions of nanoparticle characteristics, based on univariate measurements
In: Inverse Problems in Science and Engineering (2020)
ISSN: 1741-5977
DOI: 10.1080/17415977.2020.1849181
Gomez Bonilla JS., Dechet M., Schmidt J., Peukert W., Bück A.:
Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating
In: Rapid Prototyping Journal (2020)
ISSN: 1355-2546
DOI: 10.1108/RPJ-01-2020-0008
Gomez Bonilla JS., Szymczak T., Zhou X., Schrüfer S., Dechet M., Schmuki P., Schubert DW., Schmidt J., Peukert W., Bück A.:
Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
In: Additive Manufacturing 34 (2020), Article No.: 101373
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101373
Graczykowski B., Vogel N., Bley K., Butt HJ., Fytas G.:
Multiband Hypersound Filtering in Two-Dimensional Colloidal Crystals: Adhesion, Resonances, and Periodicity
In: Nano Letters (2020)
ISSN: 1530-6984
DOI: 10.1021/acs.nanolett.9b05101
Görlitzer E., Mohammadi R., Nechayev S., Volk K., Rey M., Banzer P., Karg M., Vogel N.:
Chiral Surface Lattice Resonances
In: Advanced Materials (2020)
ISSN: 0935-9648
DOI: 10.1002/adma.202001330
Görlitzer E., Speichermann L., Mirza TA., Mohammadi R., Vogel N.:
Addressing the plasmonic hotspot region by site-specific functionalization of nanostructures
In: Nanoscale Advances 2 (2020), p. 394-400
ISSN: 2516-0230
DOI: 10.1039/c9na00757a
Hesse N., Peukert W., Schmidt J.:
Enhancement of polyamide laser sinter powder reusability by acid catalyzed hydrolysis
In: Procedia CIRP 94 (2020), p. 105-109
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.021
Hoffmann EM., Fischer D., Thoma M., Damm C., Lobaz V., Zhigunov A., Peukert W.:
Impact of DAA/water composition on PFSA ionomer conformation.
In: Journal of Colloid and Interface Science 582 (2020), p. 883-893
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2020.08.058
Hosseinpour S., Roeters S., Bonn M., Peukert W., Woutersen S., Weidner T.:
Structure and dynamics of interfacial peptides and proteins from vibrational sum-frequency generation spectroscopy
In: Chemical Reviews 120 (2020), p. 3420-3465
ISSN: 0009-2665
DOI: 10.1021/acs.chemrev.9b00410
URL: https://pubs.acs.org/doi/abs/10.1021/acs.chemrev.9b00410
Hupfeld T., Salamon S., Landers J., Sommereyns A., Donate-Buendia C., Schmidt J., Wende H., Schmidt M., Barcikowski S., Goekce B.:
3D printing of magnetic parts by laser powder bed fusion of iron oxide nanoparticle functionalized polyamide powders
In: Journal of Materials Chemistry C 8 (2020), p. 12204-12217
ISSN: 2050-7526
DOI: 10.1039/d0tc02740e
Höhn S., Zheng K., Romeis S., Brehl M., Peukert W., de Ligny D., Virtanen S., Boccaccini AR.:
Effects of Medium pH and Preconditioning Treatment on Protein Adsorption on 45S5 Bioactive Glass Surfaces
In: Advanced Materials Interfaces (2020)
ISSN: 2196-7350
DOI: 10.1002/admi.202000420
Jiang Z., Du J., Rieck C., Bück A., Tsotsas E.:
PTV experiments and DEM simulations of the coefficient of restitution for irregular particles impacting on horizontal substrates
In: Powder Technology 360 (2020), p. 352-365
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2019.10.072
Jiang Z., Rieck C., Bück A., Tsotsas E.:
Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach
In: Chemical Engineering Science 211 (2020), Article No.: 115289
ISSN: 0009-2509
DOI: 10.1016/j.ces.2019.115289
John D., Mohammadi R., Vogel N., Andrieu-Brunsen A.:
Surface-Plasmon- And Green-Light-Induced Polymerization in Mesoporous Thin Silica Films
In: Langmuir (2020)
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.0c00043
Lee H., Segets D., Süß S., Peukert W., Chen SC., Pui DY.:
Effects of filter structure, flow velocity, particle concentration and fouling on the retention efficiency of ultrafiltration for sub-20 nm gold nanoparticles
In: Separation and Purification Technology 241 (2020), Article No.: 116689
ISSN: 1383-5866
DOI: 10.1016/j.seppur.2020.116689
Lin W., Greve C., Härtner S., Götz K., Walter J., Wu M., Rechberger S., Spiecker E., Busch S., Schmutzler T., Avadhut Y., Hartmann M., Unruh T., Peukert W., Segets D.:
Unraveling Complexity: A Strategy for the Characterization of Anisotropic Core Multishell Nanoparticles
In: Particle & Particle Systems Characterization (2020)
ISSN: 0934-0866
DOI: 10.1002/ppsc.202000145
Lübbert C., Peukert W.:
Mobility-Classified Mass Spectrometry Reveals a Complete Picture of the Electrospray Outcome
In: Journal of Physical Chemistry A 124 (2020), p. 8842-8852
ISSN: 1520-5215
DOI: 10.1021/acs.jpca.0c05076
Michaud M., Haderlein M., Segets D., Peukert W.:
Flowsheet simulation of integrated precipitation processes
In: Stefan Heinrich (ed.): Dynamic Flowsheet Simulation of Solids Processes, Cham: Springer International Publishing, 2020, p. 269-304
DOI: 10.1007/978-3-030-45168-4_8
Mohajernia S., Andryskova P., Zoppellaro G., Hejazi S., Kment S., Zboril R., Schmidt J., Schmuki P.:
Influence of Ti3+ defect-type on heterogeneous photocatalytic H2 evolution activity of TiO2
In: Journal of Materials Chemistry A 8 (2020), p. 1432-1442
ISSN: 2050-7488
DOI: 10.1039/c9ta10855f
Mohammadi R., Ochs M., Andrieu-Brunsen A., Vogel N.:
Effect of Asymmetry on Plasmon Hybridization and Sensing Capacities of Hole-Disk Arrays
In: Journal of Physical Chemistry C 124 (2020), p. 2609-2618
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.9b10229
Neugebauer C., Bück A., Kienle A.:
Control of Particle Size and Porosity in Continuous Fluidized-Bed Layering Granulation Processes
In: Chemical Engineering & Technology (2020)
ISSN: 0930-7516
DOI: 10.1002/ceat.201900435
Neugebauer C., Diez E., Mielke L., Palis S., Bück A., Tsotsas E., Kienle A., Heinrich S.:
Dynamics of spray granulation in continuously operated horizontal fluidized beds
In: Stefan Heinrich (ed.): Dynamic Flowsheet Simulation of Solids Processes, Cham: Springer International Publishing, 2020, p. 67-107
DOI: 10.1007/978-3-030-45168-4_3
Neumann S., Menter C., Mahmoud ASA., Segets D., Rafaja D.:
Microstructure characteristics of non-monodisperse quantum dots: On the potential of transmission electron microscopy combined with X-ray diffraction
In: Crystengcomm 22 (2020), p. 3644-3655
ISSN: 1466-8033
DOI: 10.1039/d0ce00312c
Noorbakhsh Nezhad AH., Rahimi E., Arefinia R., Davoodi A., Hosseinpour S.:
Effect of Substrate Grain Size on Structural and Corrosion Properties of Electrodeposited Nickel Layer Protected with Self-Assembled Film of Stearic Acid
In: Materials 13 (2020), p. 2052
ISSN: 1996-1944
DOI: 10.3390/ma13092052
Ochs M., Mohammadi R., Vogel N., Andrieu-Brunsen A.:
Wetting-Controlled Localized Placement of Surface Functionalities within Nanopores
In: Small (2020)
ISSN: 1613-6829
DOI: 10.1002/smll.201906463
Pflug L., Schikarski T., Keimer A., Peukert W., Stingl M.:
eMoM: Exact method of moments—Nucleation and size dependent growth of nanoparticles
In: Computers & Chemical Engineering 136 (2020), Article No.: 106775
ISSN: 0098-1354
DOI: 10.1016/j.compchemeng.2020.106775
Phillips KR., Shirman T., Aizenberg M., England GT., Vogel N., Aizenberg J.:
Silica-titania hybrids for structurally robust inverse opals with controllable refractive index
In: Journal of Materials Chemistry C 8 (2020), p. 109-116
ISSN: 2050-7526
DOI: 10.1039/c9tc05103a
Qin S., Kim H., Denisov N., Fehn D., Schmidt J., Meyer K., Schmuki P.:
Grey facet-controlled anatase nanosheets for photocatalytic H2 evolution without co-catalyst
In: JPhys Energy (2020)
ISSN: 2515-7655
DOI: 10.1088/2515-7655/abd5a8
Reinhardt E., Salaheldin AM., Distaso M., Segets D., Peukert W.:
Rapid Characterization and Parameter Space Exploration of Perovskites Using an Automated Routine
In: ACS Combinatorial Science 22 (2020), p. 6-17
ISSN: 2156-8952
DOI: 10.1021/acscombsci.9b00068
Rey M., Fernandez-Rodriguez MA., Karg M., Isa L., Vogel N.:
Poly-N-isopropylacrylamide Nanogels and Microgels at Fluid Interfaces
In: Accounts of Chemical Research (2020)
ISSN: 0001-4842
DOI: 10.1021/acs.accounts.9b00528
Rey M., Uttinger M., Peukert W., Walter J., Vogel N.:
Probing particle heteroaggregation using analytical centrifugation
In: Soft Matter 16 (2020), p. 3407-3415
ISSN: 1744-683X
DOI: 10.1039/D0SM00026D
Rieck C., Bück A., Tsotsas E.:
Estimation of the dominant size enlargement mechanism in spray fluidized bed processes
In: Aiche Journal (2020), Article No.: e16920
ISSN: 0001-1541
DOI: 10.1002/aic.16920
Riedel F., Düsenberg B., Schmidt J., Bück A., Peukert W.:
Production of PBT/PC multi-material particles via a combination of co-grinding and spray-agglomeration for powder bed fusion
In: Procedia CIRP 94 (2020), p. 100-104
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.020
Saha J., Bück A.:
Improved accuracy and convergence analysis of finite volume methods for particle fragmentation models
In: Mathematical Methods in the Applied Sciences (2020)
ISSN: 0170-4214
DOI: 10.1002/mma.6890
Sajjadnejad M., Karimi Abadeh H., Omidvar H., Hosseinpour S.:
Assessment of Tribological behavior of nickel-nano Si3N4 composite coatings fabricated by pulsed electroplating process
In: Surface Topography: Metrology and Properties 8 (2020), p. 025009
ISSN: 2051-672X
DOI: 10.1088/2051-672X/ab7ae5
URL: https://iopscience.iop.org/article/10.1088/2051-672X/ab7ae5
Schmidt J., Parteli EJ., Uhlmann N., Wörlein N., Wirth KE., Pöschel T., Peukert W.:
Packings of micron-sized spherical particles – Insights from bulk density determination, X-ray microtomography and discrete element simulations
In: Advanced Powder Technology (2020)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2020.03.018
Schuhladen K., Stich L., Schmidt J., Steinkasserer A., Boccaccini AR., Zinser E.:
Cu, Zn doped borate bioactive glasses: antibacterial efficacy and dose-dependent in vitro modulation of murine dendritic cells
In: Biomaterials Science 8 (2020), p. 2143-2155
ISSN: 2047-4830
DOI: 10.1039/c9bm01691k
Somerville WR., Law AD., Rey M., Vogel N., Archer AJ., Buzza DMA.:
Pattern formation in two-dimensional hard-core/soft-shell systems with variable soft shell profiles
In: Soft Matter 16 (2020), p. 3564-3573
ISSN: 1744-683X
DOI: 10.1039/d0sm00092b
Strenzke G., Dürr R., Bück A., Tsotsas E.:
Influence of operating parameters on process behavior and product quality in continuous spray fluidized bed agglomeration
In: Powder Technology 375 (2020), p. 210-220
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2020.07.083
Strobel A., Köninger B., Romeis S., Schott F., Wirth KE., Peukert W.:
Assessing stress conditions and impact velocities in fluidized bed opposed jet mills
In: Particuology (2020)
ISSN: 1674-2001
DOI: 10.1016/j.partic.2020.02.006
Strobel A., Köninger B., Romeis S., Wirth KE., Peukert W.:
Impact comminution in jet mills
In: Stefan Heinrich (ed.): Dynamic Flowsheet Simulation of Solids Processes, Springer International Publishing, 2020, p. 305-347
DOI: 10.1007/978-3-030-45168-4_9
Süß S., Bartsch K., Wasmus C., Damm C., Segets D., Peukert W.:
Chromatographic property classification of narrowly distributed ZnS quantum dots
In: Nanoscale 12 (2020), p. 12114-12125
ISSN: 2040-3364
DOI: 10.1039/d0nr03890c
Tada ÉFR., Bück A., Tsotsas E., Thoméo JC.:
Mass transport in a partially filled horizontal drum: Modelling and experiments
In: Chemical Engineering Science 214 (2020), Article No.: 115448
ISSN: 0009-2509
DOI: 10.1016/j.ces.2019.115448
Uhlemann J., Diedam H., Hoheisel W., Schikarski T., Peukert W.:
Modeling and Simulation of Process Technology for Nanoparticulate Drug Formulations-A Particle Technology Perspective.
In: Pharmaceutics 13 (2020)
ISSN: 1999-4923
DOI: 10.3390/pharmaceutics13010022
Uttinger M., Boldt S., Wawra S., Freiwald T., Damm C., Walter J., Lerche D., Peukert W.:
New Prospects for Particle Characterization Using Analytical Centrifugation with Sector-Shaped Centerpieces
In: Particle & Particle Systems Characterization (2020)
ISSN: 0934-0866
DOI: 10.1002/ppsc.202000108
Uttinger M., Heyn TR., Jandt U., Wawra S., Winzer B., Keppler JK., Peukert W.:
Measurement of length distribution of beta-lactoglobulin fibrils by multiwavelength analytical ultracentrifugation
In: European Biophysics Journal (2020)
ISSN: 0175-7571
DOI: 10.1007/s00249-020-01421-4
Walter T., Grünewald A., Detsch R., Boccaccini AR., Vogel N.:
Cell Interactions with Size-Controlled Colloidal Monolayers: Toward Improved Coatings in Bone Tissue Engineering
In: Langmuir 36 (2020), p. 1793-1803
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.9b03308
Wendisch FJ., Abazari M., Mahdavi H., Rey M., Vogel N., Musso M., Diwald O., Bourret GR.:
Morphology-Graded Silicon Nanowire Arrays via Chemical Etching: Engineering Optical Properties at the Nanoscale and Macroscale
In: ACS Applied Materials and Interfaces (2020)
ISSN: 1944-8244
DOI: 10.1021/acsami.9b21466
Wendisch FJ., Abazari M., Werner V., Barb H., Rey M., Görlitzer E., Vogel N., Mahdavi H., Bourret GR.:
Spatioselective Deposition of Passivating and Electrocatalytic Layers on Silicon Nanowire Arrays.
In: ACS Applied Materials and Interfaces (2020)
ISSN: 1944-8244
DOI: 10.1021/acsami.0c14013
Wendisch FJ., Rey M., Vogel N., Bourret GR.:
Large-Scale Synthesis of Highly Uniform Silicon Nanowire Arrays Using Metal-Assisted Chemical Etching
In: Chemistry of Materials (2020), p. 9425-9434
ISSN: 0897-4756
DOI: 10.1021/acs.chemmater.0c03593
Westhauser F., Wilkesmann S., Nawaz Q., Hohenbild F., Rehder F., Saur M., Fellenberg J., Moghaddam A., Ali MS., Peukert W., Boccaccini AR.:
Effect of manganese, zinc, and copper on the biological and osteogenic properties of mesoporous bioactive glass nanoparticles
In: Journal of Biomedical Materials Research Part A (2020)
ISSN: 1549-3296
DOI: 10.1002/jbm.a.37136
Yoo JE., Alshehri AA., Qin S., Bawaked SM., Mostafa MMM., Katabathini N., Fehn D., Schmidt J., Mazare AV., Denisov N., Cha G., Meyer K., Schmuki P.:
Establishing High Photocatalytic H-2 Evolution from Multiwalled Titanate Nanotubes
In: ChemCatChem (2020)
ISSN: 1867-3880
DOI: 10.1002/cctc.202000281
Zhang L., Jiang Z., Mellmann J., Weigler F., Herz F., Bück A., Tsotsas E.:
Influence of the number of flights on the dilute phase ratio in flighted rotating drums by PTV measurements and DEM simulations
In: Particuology (2020)
ISSN: 1674-2001
DOI: 10.1016/j.partic.2020.09.010
Zhang L., Jiang Z., Weigler F., Herz F., Mellmann J., Tsotsas E.:
PTV measurement and DEM simulation of the particle motion in a flighted rotating drum
In: Powder Technology 363 (2020), p. 23-37
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2019.12.035

Attar MR., Khajavani E., Hosseinpour S., Davoodi A.:
Fabrication of Micro-Nano Roughened Surface with Superhydrophobic Character on an Aluminum Alloy Surface by a Facile Chemical Etching Process
In: Bulletin of Materials Science (2019), Article No.: 33
ISSN: 0250-4707
DOI: 10.1007/s12034-019-1998-7
URL: https://link.springer.com/article/10.1007/s12034-019-1998-7
Bioucas F., Damm C., Peukert W., Rausch MH., Koller TM., Giraudet C., Fröba AP.:
Translational and Rotational Diffusion Coefficients of Gold Nanorods Dispersed in Mixtures of Water and Glycerol by Polarized Dynamic Light Scattering
In: Journal of Physical Chemistry B 123 (2019), p. 9491-9502
ISSN: 1520-6106
DOI: 10.1021/acs.jpcb.9b08274
Braig V., Konnerth CG., Peukert W., Lee G.:
Can spray freeze-drying improve the re-dispersion of crystalline nanoparticles of pure naproxen?
In: International Journal of Pharmaceutics 564 (2019), p. 293-298
ISSN: 0378-5173
DOI: 10.1016/j.ijpharm.2019.04.061
Braig V., Konnerth CG., Peukert W., Lee G.:
Effects of pH of processing-medium on re-dispersion of spray dried, crystalline nanoparticles of pure naproxen
In: International Journal of Pharmaceutics 558 (2019), p. 261-267
ISSN: 0378-5173
DOI: 10.1016/j.ijpharm.2018.12.084
Bück A., Metzger T., Schönherr M.:
The first sixty years of professor Evangelos Tsotsas—or: A quarter-century of combining drying and particle formation
In: Drying Technology 37 (2019), p. 495-496
ISSN: 0737-3937
DOI: 10.1080/07373937.2018.1545784
Chen K., Bachmann P., Bück A., Jacob M., Tsotsas E.:
CFD simulation of particle residence time distribution in industrial scale horizontal fluidized bed
In: Powder Technology 345 (2019), p. 129-139
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.12.086
Dechet M., Goblirsch A., Romeis S., Zhao M., Lanyi F., Kaschta J., Schubert DW., Drummer D., Peukert W., Schmidt J.:
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
In: Chemical Engineering Science 197 (2019), p. 11-25
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.11.051
Dechet M., Kloos S., Peukert W., Schmidt J.:
Production of Spherical Micron-Sized Polymer Particles for Additive Manufacturing by Liquid Phase Processes
Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27. June 2017 - 29. June 2017)
In: Proceedings of the Europe/Africa Conference Dresden 2017 Polymer Processing Society PPS, MELVILLE: 2019
DOI: 10.1063/1.5084905
Dechet M., Kloos S., Peukert W., Schmidt J.:
Formation of spherical micron-sized polyamide particles for additive manufacturing via liquid-liquid phase separation
33rd International Conference of the Polymer Processing Society, PPS 2017 (Cancun, MEX, 10. December 2017 - 14. December 2017)
In: Octavio Manero, Fausto Calderas (ed.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5121696
Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
Dechet M., Lanzl L., Wilden A., Sattes MM., Drummer D., Peukert W., Schmidt J.:
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
Diez E., Kieckhefen P., Meyer K., Bück A., Tsotsas E., Heinrich S.:
Particle dynamics in a multi-staged fluidized bed: Particle transport behavior on micro-scale by discrete particle modelling
In: Advanced Powder Technology (2019)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2019.05.025
Domaschke M., Lübbert C., Peukert W.:
Analysis of ultrafine metal oxide particles in aerosols using mobility-resolved time-of-flight mass spectrometry
In: Journal of Aerosol Science 137 (2019), Article No.: 105438
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2019.105438
Domaschke M., Strunz L., Peukert W.:
Single-step aerosol synthesis of oxygen-deficient blue titania
In: Chemical Engineering Science 206 (2019), p. 327-334
ISSN: 0009-2509
DOI: 10.1016/j.ces.2019.05.044
Domaschke M., Zhou X., Wergen L., Romeis S., Miehlich M., Meyer K., Peukert W., Schmuki P.:
Magneli-Phases in Anatase Strongly Promote Cocatalyst-Free Photocatalytic Hydrogen Evolution
In: ACS Catalysis 9 (2019), p. 3627-3632
ISSN: 2155-5435
DOI: 10.1021/acscatal.9b00578
Duerr R., Seidel C., Neugebauer C., Bück A.:
Self-tuning control of continuous fluidized bed drying of baker's yeast pellets
In: Drying Technology 38 (2019), p. 646-654
ISSN: 0737-3937
DOI: 10.1080/07373937.2019.1662800
Englisch S., Wirth J., Przybilla T., Apeleo Zubiri B., Wang J., Vogel N., Spiecker E.:
Scale-Bridging 3D-Analysis of Colloidal Clusters Using 360° Electron Tomography and X-Ray Nano-CT
DOI: 10.1017/S1431927619002691
URL: https://www.cambridge.org/core/journals/microscopy-and-microanalysis/article/scalebridging-3danalysis-of-colloidal-clusters-using-360-electron-tomography-and-xray-nanoct/0FD7C5C09F258792F594A66FAC2E1A7B
Englisch S., Wirth J., Przybilla T., Apeleo Zubiri B., Wang J., Vogel N., Spiecker E.:
Scale-Bridging 3D-Analysis of Colloidal Clusters Using 360° Electron Tomography and X-Ray Nano-CT
In: Microscopy and Microanalysis (2019)
ISSN: 1431-9276
DOI: 10.1017/S1431927619002691
Frank U., Wawra S., Pflug L., Peukert W.:
Multidimensional Particle Size Distributions and Their Application to Nonspherical Particle Systems in Two Dimensions
In: Particle & Particle Systems Characterization (2019), Article No.: 1800554
ISSN: 0934-0866
DOI: 10.1002/ppsc.201800554
Ghanem MA., Khanolkar A., Wallen SP., Helwig M., Hiraiwa M., Maznev AA., Vogel N., Boechler N.:
Longitudinal eigenvibration of multilayer colloidal crystals and the effect of nanoscale contact bridges
In: Nanoscale 11 (2019), p. 5655-5665
ISSN: 2040-3364
DOI: 10.1039/c8nr08453j
Ghazanlou SI., Farhood AHS., Ahmadiyeh S., Ziyaei E., Rasooli A., Hosseinpour S.:
Characterization of Pulse and Direct Current Methods for Electrodeposition of Ni-Co Composite Coatings Reinforced with Nano and Micro ZnO Particles
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 50A (2019), p. 1922-1935
ISSN: 1073-5623
DOI: 10.1007/s11661-019-05118-y
Giraudet C., Knoll M., Galvan Y., Süß S., Segets D., Vogel N., Rausch MH., Fröba AP.:
Diffusion of Gold Nanoparticles in Inverse Opals Probed by Heterodyne Dynamic Light Scattering
In: Transport in Porous Media 131 (2019), p. 723-737
ISSN: 0169-3913
DOI: 10.1007/s11242-019-01364-1
Gomez Bonilla JS., Kletcher R., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
Effect of particle rounding on the processability of polypropylene powder and the mechanical properties of selective laser sintering produced parts
30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095971435&origin=inward
Gomez Bonilla JS., Trzenschiok H., Lanyi F., Schubert DW., Bück A., Schmidt J., Peukert W.:
Tailored modification of flow behavior and processability of polypropylene powders in SLS by fluidized bed coating with in-situ plasma produced silica nanoparticles
30th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2019 (Austin, 12. August 2019 - 14. August 2019)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85095963751&origin=inward
Guckeisen T., Hosseinpour S., Peukert W.:
Isoelectric points of proteins at the air/liquid interface and in solution
In: Langmuir 35 (2019), p. 5004-5012
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.9b00311
Görlitzer E., Mohammadi R., Nechayev S., Banzer P., Vogel N.:
Large-Area 3D Plasmonic Crescents with Tunable Chirality
In: Advanced Optical Materials (2019), Article No.: 1801770
ISSN: 2195-1071
DOI: 10.1002/adom.201801770
Güldenpfennig A., Distaso M., Peukert W.:
In situ investigations on the amorphous to crystalline phase transformation of precursors for methanol synthesis catalysts
In: Chemical Engineering Journal 369 (2019), p. 996-1004
ISSN: 1385-8947
DOI: 10.1016/j.cej.2019.03.088
Güldenpfennig A., Pflug L., Peukert W.:
How to Estimate Material Parameters for Multiphase, Multicomponent Precipitation Modeling
In: Crystal Growth and Design 19 (2019), p. 2785-2793
ISSN: 1528-7483
DOI: 10.1021/acs.cgd.9b00027
Harrer J., Rey M., Ciarella S., Löwen H., Janssen LM., Vogel N.:
Stimuli-Responsive Behavior of PNiPAm Microgels under Interfacial Confinement
In: Langmuir (2019)
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.9b01208
Hasanzadeh Kafshgari M., Kah DE., Mazare AV., Nguyen NT., Distaso M., Peukert W., Goldmann W., Schmuki P., Fabry B.:
Anodic Titanium Dioxide Nanotubes for Magnetically Guided Therapeutic Delivery
In: Scientific Reports 9 (2019), p. 13439-
ISSN: 2045-2322
DOI: 10.1038/s41598-019-49513-2
Hasanzadeh Kafshgari M., Mazare AV., Distaso M., Goldmann W., Peukert W., Fabry B., Schmuki P.:
Intracellular Drug Delivery with Anodic Titanium Dioxide Nanotubes and Nanocylinders
In: ACS Applied Materials and Interfaces 11 (2019), p. 14980-14985
ISSN: 1944-8244
DOI: 10.1021/acsami.9b01211
Hassanien AE., Abdelhaleem S., Ahmad R., Schuster M., Moustafa SH., Distaso M., Peukert W., Wellmann P.:
Effect of Fast Annealing on Structural Characteristics and Optical Properties of Cu2ZnSnS4 Absorber Films Deposited by Doctor-Blade Technique
In: Journal of Nanoelectronics and Optoelectronics 14 (2019), p. 1394-1400
ISSN: 1555-130X
DOI: 10.1166/jno.2019.2633
Helmer A., Rink A., Esper J., Wu Y., Bachmann J., Klupp Taylor R.:
Preparation, formulation and deposition of mica flake supported cobalt oxide for nanostructured lithium ion battery anodes
In: Advanced Powder Technology 30 (2019), p. 3127-3134
ISSN: 0921-8831
DOI: 10.1016/j.apt.2019.09.020
URL: https://www.sciencedirect.com/science/article/pii/S0921883119303243
Hesse N., Dechet M., Gomez Bonilla JS., Lübbert C., Roth S., Bück A., Schmidt J., Peukert W.:
Analysis of tribo-charging during powder spreading in selective laser sintering: Assessment of polyamide 12 powder ageing effects on charging behavior
In: Polymers 11 (2019), Article No.: 609
ISSN: 2073-4360
DOI: 10.3390/polym11040609
Heyn TR., Garamus VM., Neumann HR., Uttinger M., Guckeisen T., Heuer M., Selhuber-Unkel C., Peukert W., Keppler JK.:
Influence of the polydispersity of pH 2 and pH 3.5 beta-lactoglobulin amyloid fibril solutions on analytical methods
In: European Polymer Journal 120 (2019), Article No.: 109211
ISSN: 0014-3057
DOI: 10.1016/j.eurpolymj.2019.08.038
Hinterberger V., Damm C., Haines P., Guldi DM., Peukert W.:
Purification and structural elucidation of carbon dots by column chromatography
In: Nanoscale 11 (2019), p. 8464-8474
ISSN: 2040-3364
DOI: 10.1039/c9nr01029g
Hoffmann EM., Zhang S., Thoma M., Damm C., Peukert W.:
Formulation of carbon black-ionomer dispersions for thin film formation in fuel cells
In: Particuology (2019)
ISSN: 1674-2001
DOI: 10.1016/j.partic.2018.08.001
Idakiev VV., Bueck A., Moerl L., Tsotsas E.:
Inductive heating of fluidized beds: Mobile versus stationary heat exchange elements
In: Drying Technology 37 (2019), p. 652-663
ISSN: 0737-3937
DOI: 10.1080/07373937.2018.1526190
Khanolkar A., Wallen S., Ghanem MA., Jenks J., Vogel N., Boechler N.:
Erratum: A self-assembled metamaterial for Lamb waves (Applied Physics Letters (2015) 107 (071903) DOI: 10.1063/1.4928564)
In: Applied Physics Letters 114 (2019), Article No.: 139901
ISSN: 0003-6951
DOI: 10.1063/1.5095407
Koch V., Barr M., Büttner P., Mínguez-Bacho I., Döhler D., Winzer B., Reinhardt E., Segets D., Bachmann J.:
A solution-based ALD route towards (CH3NH3)(PbI3) perovskite via lead sulfide films
In: Journal of Materials Chemistry A 7 (2019), p. 25112-25119
ISSN: 2050-7488
DOI: 10.1039/c9ta09715e
Konnerth CG., Peukert W., Braig V., Lee G.:
Enhanced dissolution of naproxen from pure-drug, crystalline nanoparticles: A case study formulated into spray-dried granules and compressed tablets
In: International Journal of Pharmaceutics 554 (2019), p. 54-60
ISSN: 0378-5173
DOI: 10.1016/j.ijpharm.2018.09.069
URL: https://www.journals.elsevier.com/international-journal-of-pharmaceutics
Köninger B., Spoetter C., Romeis S., Weber AP., Wirth KE.:
Classifier performance during dynamic fine grinding in fluidized bed opposed jet mills
In: Advanced Powder Technology (2019)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2019.05.018
Leber A., Cholst B., Sandt J., Vogel N., Kolle M.:
Stretchable Thermoplastic Elastomer Optical Fibers for Sensing of Extreme Deformations
In: Advanced Functional Materials 29 (2019), Article No.: 1802629
ISSN: 1616-301X
DOI: 10.1002/adfm.201802629
Lehr M., Bley K., Vogel N., Rethfeld B., Schönhense G., Elmers HJ.:
Evidence of Spatially Inhomogeneous Electron Temperature in a Resonantly Excited Array of Bow-Tie Nanoantennas
In: Journal of Physical Chemistry C 123 (2019), p. 12429-12436
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.9b03722
Licklederer M., Mohammadi R., Nguyen NT., Park H., Hejazi S., Halik M., Vogel N., Altomare M., Schmuki P.:
Dewetted Au Nanoparticles on TiO2 Surfaces: Evidence of a Size-Independent Plasmonic Photoelectrochemical Response
In: Journal of Physical Chemistry C 123 (2019), p. 16934-16942
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.9b02769
Lübbert C., Peukert W.:
How to avoid interfering electrochemical reactions in ESI-MS analysis
In: Journal of Mass Spectrometry 54 (2019), p. 301-310
ISSN: 1076-5174
DOI: 10.1002/jms.4315
Mahmoud ASA., Segets D.:
Cleaning matters!
In: ACS Combinatorial Science (2019)
ISSN: 2156-8952
DOI: 10.1021/acscombsci.9b00122
Marnani AK., Bück A., Antonyuk S., Van Wachem B., Thevenin D., Tomas J.:
The Effect of the Presence of Very Cohesive Geldart C Ultra-Fine Particles on the Fluidization of Geldart A Fine Particle Beds
In: Processes 7 (2019), Article No.: 35
ISSN: 2227-9717
DOI: 10.3390/pr7010035
Marnani AK., Bück A., Antonyuk S., van Wachem B., Thévenin D., Tomas J.:
The effect of very cohesive ultra-fine particles in mixtures on compression, consolidation, and fluidization
In: Processes 7 (2019), Article No.: 439
ISSN: 2227-9717
DOI: 10.3390/pr7070439
Menter C., Segets D.:
Scalable classification of nanoparticles: A proof of principle for process design
In: Advanced Powder Technology (2019)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2019.08.027
Mielke L., Bück A., Tsotsas E.:
Multi-stage and multi-compartment model for dynamic simulation of horizontal fluidized bed granulator
In: Drying Technology (2019)
ISSN: 0737-3937
DOI: 10.1080/07373937.2019.1658114
Mueller D., Bück A., Tsotsas E.:
Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation
In: Powder Technology 342 (2019), p. 572-584
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.10.024
Neugebauer C., Diez E., Bück A., Palis S., Heinrich S., Kienle A.:
On the dynamics and control of continuous fluidized bed layering granulation with screen-mill-cycle
In: Powder Technology 354 (2019), p. 765-778
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2019.05.030
Noorbakhsh Nezhad AH., Arefinia R., Kashefi M., Davoodi A., Hosseinpour S.:
Compatibility of fabrication of superhydrophobic surfaces and addition of inhibitors in designing corrosion prevention strategies for electrodeposited nickel in saline solutions
In: Applied Surface Science 493 (2019), p. 1243-1254
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2019.07.088
URL: https://www.sciencedirect.com/science/article/pii/S0169433219321245?via=ihub
Okonkwo BO., Ming H., Zhang Z., Wang J., Rahimi E., Hosseinpour S., Davoodi A.:
Microscale investigation of the correlation between microstructure and galvanic corrosion of low alloy steel A508 and its welded 309/308L stainless steel overlayer
In: Corrosion Science (2019)
ISSN: 0010-938X
DOI: 10.1016/j.corsci.2019.03.027
Peukert W., Walter J.:
Specific Properties of Nanoparticles
In: Ko Higashitani, Hisao Makino, Shuji Matsusaka (ed.): Powder Technology Handbook, Fourth Edition, CRC Press, 2019, p. 59-68
Peukert W., Walter J.:
Centrifugation | Analytical Ultracentrifugation
In: Paul Worsfold, Colin Poole, Alan Townshend, Manuel Miró (ed.): Encyclopedia of Analytical Science, Elsevier, 2019, p. 372-382
DOI: 10.1016/B978-0-12-409547-2.14528-7
Rahimi E., Kosari A., Hosseinpour S., Davoodi A., Zandbergen H., Mol JM.:
Characterization of the passive layer on ferrite and austenite phases of super duplex stainless steel
In: Applied Surface Science 496 (2019), Article No.: 143634
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2019.143634
Rahimi E., Rafsanjani-Abbasi A., Davoodi A., Hosseinpour S.:
Characterization of the Native Passive Film on Ferrite and Austenite Phases of Sensitized 2205 Duplex Stainless Steel
In: Journal of The Electrochemical Society 166 (2019), p. C609-C616
ISSN: 0013-4651
DOI: 10.1149/2.1371915jes
URL: http://jes.ecsdl.org/content/166/16/C609.full.pdf+html
Rahimi E., Rafsanjani-Abbasi A., Imani A., Kiani Rashid AR., Hosseinpour S., Davoodi A.:
Synergistic effect of a crystal modifier and screw dislocation step defects on the formation mechanism of nickel micro-nanocone
In: Materials Letters 245 (2019), p. 68-72
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2019.02.093
Rasch M., Heberle J., Dechet M., Bartels D., Gotterbarm M., Klein L., Gorunov A., Schmidt J., Körner C., Peukert W., Schmidt M.:
Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
In: Materials 13 (2019)
ISSN: 1996-1944
DOI: 10.3390/ma13010082
Rey M., Yu T., Guenther R., Bley K., Vogel N.:
A Dirty Story: Improving Colloidal Monolayer Formation by Understanding the Effect of Impurities at the Air/Water Interface
In: Langmuir 35 (2019), p. 95-103
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.8b02605
Saha J., Das N., Kumar J., Bück A.:
NUMERICAL SOLUTIONS FOR MULTIDIMENSIONAL FRAGMENTATION PROBLEMS USING FINITE VOLUME METHODS
In: Kinetic and Related Models 12 (2019)
ISSN: 1937-5093
DOI: 10.3934/krm.2019004
Schikarski T., Trzenschiok H., Avila M., Peukert W.:
Influence of Mixing on the Precipitation of Organic Nanoparticles: A Lagrangian Perspective on Scale-up Based on Self-Similar Distributions
In: Chemical Engineering & Technology (2019)
ISSN: 0930-7516
DOI: 10.1002/ceat.201900095
Schikarski T., Trzenschiok H., Peukert W., Avila M.:
Inflow boundary conditions determine T-mixer efficiency
In: Reaction Chemistry & Engineering 4 (2019), p. 559-568
ISSN: 2058-9883
DOI: 10.1039/c8re00208h
Schlegel SJ., Hosseinpour S., Gebhard M., Devi A., Bonn M., Backus EH.:
How water flips at charged titanium dioxide: An SFG-study on the water–TiO2 interface
In: Physical Chemistry Chemical Physics 21 (2019), p. 8956-8964
ISSN: 1463-9076
DOI: 10.1039/c9cp01131e
Schmidt J., Dechet M., Gomez Bonilla JS., Bück A., Peukert W.:
Process Routes towards Novel Polybutylene Terephthalate – Polycarbonate Blend Powders for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/068 Process Routes towards Novel Polybutylene Terephth.pdf
Schmidt J., Dechet M., Gomez Bonilla JS., Hesse N., Bück A., Peukert W.:
Characterization of Polymer Powders for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/066 Characterization of Polymer Powders for Selective.pdf
Schmidt J., Dechet M., Gomez Bonilla JS., Kloos S., Wirth KE., Peukert W.:
Novel process routes towards the production of spherical polymer powders for selective laser sintering
33rd International Conference of the Polymer Processing Society, PPS 2017 (Cancun, MEX, 10. December 2017 - 14. December 2017)
In: Octavio Manero, Fausto Calderas (ed.): AIP Conference Proceedings 2019
DOI: 10.1063/1.5121697
Schmutzler T., Schindler T., Zech TS., Lages S., Thoma M., Appavou MS., Peukert W., Spiecker E., Unruh T.:
n-Hexanol Enhances the Cetyltrimethylammonium Bromide Stabilization of Small Gold Nanoparticles and Promotes the Growth of Gold Nanorods
In: ACS Applied Nano Materials 2 (2019), p. 3206-3219
ISSN: 2574-0970
DOI: 10.1021/acsanm.9b00510
Schneider C., Liu N., Romeis S., Peukert W., Schmuki P.:
Easy Room Temperature Synthesis of High Surface Area Anatase Nanowires with Different Morphologies
In: ChemistryOpen (2019)
ISSN: 2191-1363
DOI: 10.1002/open.201900013
Schwendner J., Konnerth CG., Romeis S., Schmidt J., Peukert W.:
Formation of drug-loaded nanoemulsions in stirred media mills
In: Advanced Powder Technology (2019)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2019.05.005
Schwenger J., Romeis S., Herre P., Yokosawa T., Finsel M., Leib EW., Weller H., Vossmeyer T., Spiecker E., Peukert W.:
Pressure induced local phase transformation in nanocrystalline tetragonal zirconia microparticles
In: Scripta Materialia 163 (2019), p. 86-90
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2018.12.035
Stichel T., Brachmann C., Raths M., Dechet M., Schmidt J., Peukert W., Frick T., Roth S.:
Electrophotographic Multilayer Powder Pattern Deposition for Additive Manufacturing
In: JOM Journal of the Minerals, Metals and Materials Society (2019)
ISSN: 1047-4838
DOI: 10.1007/s11837-019-03965-z
Süß S., Lin W., Getmanenko O., Pflug L., Sobisch T., Peukert W., Lerche D., Segets D.:
Suspension- and powder-based derivation of Hansen dispersibility parameters for zinc oxide quantum dots
In: Particuology 44 (2019), p. 71-79
ISSN: 1674-2001
DOI: 10.1016/j.partic.2018.05.010
Süß S., Michaud V., Amsharov K., Akhmetov V., Kaspereit M., Damm C., Peukert W.:
Quantitative Evaluation of Fullerene Separation by Liquid Chromatography
In: Journal of Physical Chemistry C 123 (2019), p. 16747-16756
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.9b03247
Taccardi N., Grabau M., Debuschewltz J., Distaso M., Brandl M., Hock R., Maier F., Papp C., Erhard J., Neiß C., Peukert W., Görling A., Wolf M., Haumann M., Steinrück HP., Wasserscheid P.:
Supported liquid metals - A new class of robust dehydrogenation catalysts
12th Natural Gas Conversion Symposium 2019 (San Antonio, TX, 2. June 2019 - 6. June 2019)
In: 12th Natural Gas Conversion Symposium 2019 2019
Talari M., Mozafari Nezhad S., Alavi SJ., Mohtashamipour M., Davoodi A., Hosseinpour S.:
Experimental and computational chemistry studies of two imidazole-based compounds as corrosion inhibitors for mild steel in HCl solution
In: Journal of Molecular Liquids 286 (2019)
ISSN: 0167-7322
DOI: 10.1016/j.molliq.2019.110915
URL: https://www.sciencedirect.com/science/article/pii/S0167732219309134
Trzenschiok H., Distaso M., Peukert W.:
A new approach for the stabilization of amorphous drug nanoparticles during continuous antisolvent precipitation
In: Chemical Engineering Journal 361 (2019), p. 428-438
ISSN: 1385-8947
DOI: 10.1016/j.cej.2018.12.075
Uttinger M., Wawra S., Guckeisen T., Walter J., Bear A., Thajudeen T., Sherwood PJ., Smith AS., Wagemans AM., Stafford WF., Peukert W.:
A Comprehensive Brownian Dynamics Approach for the Determination of Non-ideality Parameters from Analytical Ultracentrifugation
In: Langmuir (2019)
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.9b01916
Vorhauer N., Tretau A., Bück A., Prat M.:
Microwave drying of wet clay with intermittent heating
In: Drying Technology 37 (2019), p. 664-678
ISSN: 0737-3937
DOI: 10.1080/07373937.2018.1547740
Wang J., Mbah Chrameh F., Przybilla T., Englisch S., Spiecker E., Engel M., Vogel N.:
Free Energy Landscape of Colloidal Clusters in Spherical Confinement
In: Acs Nano (2019)
ISSN: 1936-0851
DOI: 10.1021/acsnano.9b03039
Wang J., Sultan U., Görlitzer E., Mbah Chrameh F., Engel M., Vogel N.:
Structural Color of Colloidal Clusters as a Tool to Investigate Structure and Dynamics
In: Advanced Functional Materials (2019), Article No.: 1907730
ISSN: 1616-301X
DOI: 10.1002/adfm.201907730
Wawra S., Onishchukov G., Maranska M., Eigler S., Walter J., Peukert W.:
A multiwavelength emission detector for analytical ultracentrifugation
In: Nanoscale Advances (2019)
ISSN: 2516-0230
DOI: 10.1039/C9NA00487D
Wergen L., Domaschke M., Herre P., Wu M., Spiecker E., Peukert W.:
Aerosol synthesis of germanium nanoparticles supported by external seeding: Theoretical and experimental analysis
In: Journal of Aerosol Science 128 (2019), p. 50-61
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2018.11.013
Wierzbicka E., Domaschke M., Denisov N., Fehn D., Hwang I., Kaufmann M., Kunstmann B., Schmidt J., Meyer K., Peukert W., Schmuki P.:
Magnéli Phases Doped with Pt for Photocatalytic Hydrogen Evolution
In: ACS Applied Energy Materials (2019)
ISSN: 2574-0962
DOI: 10.1021/acsaem.9b02053
Wudy K., Schmidt J., Lanzl L., Zhao M., Jaksch A., Dechet M., Hesse N., Drummer D., Peukert W.:
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. December 2019 - 12. December 2019)
In: Dietmar Drummer (ed.): Vom Pulver zum multifunktionalen Bauteil 2019
Zarekar S., Bück A., Jacob M., Tsotsas E.:
Numerical study of the hydrodynamics of fluidized beds operated under sub-atmospheric pressure
In: Chemical Engineering Journal 372 (2019), p. 1134-1153
ISSN: 1385-8947
DOI: 10.1016/j.cej.2019.04.159

Abdelhaleem S., Hassanien A., Ahmad R., Schuster M., Ashour A., Distaso M., Peukert W., Wellmann P.:
Tuning the Properties of CZTS Films by Controlling the Process Parameters in Cost-Effective Non-vacuum Technique
In: Journal of Electronic Materials (2018)
ISSN: 0361-5235
DOI: 10.1007/s11664-018-6636-4
Bley K., Semmler J., Rey M., Zhao C., Martic N., Klupp Taylor R., Stingl M., Vogel N.:
Hierarchical Design of Metal Micro/Nanohole Array Films Optimizes Transparency and Haze Factor
In: Advanced Functional Materials (2018)
ISSN: 1616-301X
DOI: 10.1002/adfm.201706965
Boccardi E., Liverani L., Beltrán AM., Günther R., Schmidt J., Peukert W., Boccaccini AR.:
Mesoporous silica submicron particles (MCM-41) incorporating nanoscale Ag: synthesis, characterization and application as drug delivery coatings
In: Journal of Porous Materials (2018), p. 1-11
ISSN: 1573-4854
DOI: 10.1007/s10934-018-0621-4
Boccardi E., Philippart A., Beltran AM., Schmidt J., Liverani L., Peukert W., Boccaccini AR.:
Biodegradabiliy of spherical mesoporous silica particles (MCM-41) in simulated body fluid (SBF)
In: American Mineralogist 103 (2018), p. 350-354
ISSN: 0003-004X
DOI: 10.2138/am-2018-6281
Burger A., Kunzmann A., Costa RD., Srikantharajah R., Peukert W., Guldi DM., Hirsch A.:
Synergy of Catechol-Functionalized Zinc Oxide Nanorods and Porphyrins in Layer-by-Layer Assemblies
In: Chemistry - A European Journal 24 (2018), p. 7896-7905
ISSN: 0947-6539
DOI: 10.1002/chem.201705327
Bück A., Seidel C., Duerr R., Neugebauer C.:
Robust feedback control of convective drying of particulate solids
In: Journal of Process Control 69 (2018), p. 86-96
ISSN: 0959-1524
DOI: 10.1016/j.jprocont.2018.07.010
Damm C., Thoma M., Hoffmann EM., Sattes MM., Segets D., Peukert W., Lin W.:
Simple and Reliable Method for Studying the Adsorption Behavior of Aquivion lonomers on Carbon Black Surfaces
In: Langmuir 34 (2018), p. 12324-12334
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.8b02726
Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
In: Polymers 10 (2018), Article No.: 1373
ISSN: 2073-4360
DOI: 10.3390/polym10121373
Dechet M., Zhao M., Drummer D., Peukert W., Schmidt J.:
Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11
6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12. December 2019 - 12. December 2019)
In: Dietmar Drummer (ed.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Erlangen: 2018
Diez E., Meyer K., Bück A., Tsotsas E., Heinrich S.:
Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process
In: Chemical Engineering Research & Design 139 (2018), p. 104-115
ISSN: 0263-8762
DOI: 10.1016/j.cherd.2018.09.032
Dinkel R., Jakobi J., Ziefuß AR., Barcikowski S., Braunschweig B., Peukert W.:
Role of Citrate and NaBr at the Surface of Colloidal Gold Nanoparticles during Functionalization
In: Journal of Physical Chemistry C 122 (2018), p. 27383-27391
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.8b07897
Domaschke M., Schmidt M., Peukert W.:
A model for the particle mass yield in the aerosol synthesis of ultrafine monometallic nanoparticles by spark ablation
In: Journal of Aerosol Science 126 (2018), p. 133-142
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2018.09.004
Domaschke M., Schmidt M., Peukert W.:
A model for the particle mass yield in the aerosol synthesis of ultrafine monometallic nanoparticles by spark ablation
In: Journal of Aerosol Science 126 (2018), p. 133-142
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2018.09.004
Du J., Bück A., Tsotsas E.:
Investigation of spray agglomeration process in continuously operated horizontal fluidized bed
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7809
Egly S., Fröhlich C., Vogel S., Grünewald A., Wang J., Detsch R., Boccaccini AR., Vogel N.:
Bottom-Up Assembly of Silica and Bioactive Glass Supraparticles with Tunable Hierarchical Porosity
In: Langmuir 34 (2018), p. 2063-2072
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.7b03904
Embrechts HE., Kriesten M., Hoffmann K., Peukert W., Hartmann M., Distaso M.:
Elucidation of the Formation Mechanism of Metal-Organic Frameworks via in-Situ Raman and FTIR Spectroscopy under Solvothermal Conditions
In: Journal of Physical Chemistry C 122 (2018), p. 12267-12278
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.8b02484
Galvan Y., Phillips KR., Haumann M., Wasserscheid P., Zarraga R., Vogel N.:
Ionic-Liquid-Infused Nanostructures as Repellent Surfaces
In: Langmuir 34 (2018), p. 6894-6902
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.7b03993
Golovin I., Strenzke G., Duerr R., Palis S., Bück A., Tsotsas E., Kienle A.:
Parameter identification for continuous fluidized bed spray agglomeration
In: Processes 6 (2018), Article No.: 246
ISSN: 2227-9717
DOI: 10.3390/pr6120246
Görlitzer E., Klupp Taylor R., Vogel N.:
Bioinspired Photonic Pigments from Colloidal Self-Assembly
In: Advanced Materials 30 (2018), Article No.: 1706654
ISSN: 0935-9648
DOI: 10.1002/adma.201706654
Güldenpfennig A., Distaso M., Klupp Taylor R., Peukert W.:
Modelling the two-dimensional growth and oriented attachment of goethite nanorods synthesized via oxidation of aqueous ferrous hydroxide slurries
In: Chemical Engineering Journal 347 (2018), p. 798-807
ISSN: 1385-8947
DOI: 10.1016/j.cej.2018.04.150
Hasanzadeh Kafshgari M., Mazare AV., Distaso M., Goldmann W., Peukert W., Fabry B., Schmuki P.:
pH-responsive anodic titanium dioxide nanotubes and nanocylinders for cancer drug delivery
Idakiev VV., Steinke C., Sondej F., Bück A., Tsotsas E., Mörl L.:
Inductive heating of fluidized beds: Spray coating process
In: Powder Technology 328 (2018), p. 26-37
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.01.017
Jaksch A., Hesse N., Drummer D., Schmidt J.:
Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers
6. Industriekolloquium des SFB 814 (Nürnberg, 13. December 2018 - 13. December 2018)
In: 6. Industriekolloquium des SFB 814, 2018
Jiang Z., Hagemeier T., Bück A., Tsotsas E.:
Color-PTV measurement and CFD-DEM simulation of the dynamics of poly-disperse particle systems in a pseudo-2D fluidized bed
In: Chemical Engineering Science 179 (2018), p. 115-132
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.01.013
Jiang Z., Rieck C., Bück A., Tsotsas E.:
Modeling of Particle Behavior in a Wurster Fluidized Bed: Coupling CFD-DEM with Monte Carlo
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7219
Karawacka W., Janko C., Unterweger H., Mühlberger M., Lyer S., Taccardi N., Mokhir A., Jira W., Peukert W., Boccaccini AR., Kolot M., Strauss R., Bogdan C., Alexiou C., Tietze R.:
SPIONs functionalized with small peptides for binding of lipopolysaccharide, a pathophysiologically relevant microbial product.
In: Colloids and Surfaces B-Biointerfaces 174 (2018), p. 95-102
ISSN: 0927-7765
DOI: 10.1016/j.colsurfb.2018.11.002
Klein S., Harreiss C., Menter C., Hümmer J., Distel L., Meyer K., Hock R., Kryschi C.:
NOBF4-Functionalized Au-Fe3O4 Nanoheterodimers for Radiation Therapy: Synergy Effect Due to Simultaneous Reactive Oxygen and Nitrogen Species Formation
In: ACS Applied Materials and Interfaces 10 (2018), p. 17071-17080
ISSN: 1944-8244
DOI: 10.1021/acsami.8b03660
Kloos S., Dechet M., Peukert W., Schmidt J.:
Production of spherical semi-crystalline polycarbonate microparticles for Additive Manufacturing by liquid-liquid phase separation
In: Powder Technology 335 (2018), p. 275-284
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.05.005
Klupp Taylor R., Meincke T., Sadafi FZ., Walter J., Pflug L., Watanabe S., Peukert W., Stingl M.:
Anisometric engineering of particle interfaces: Multidimensional characterization and gram‐scale production
ProcessNet‐Jahrestagung und 33. DECHEMA‐Jahrestagung der Biotechnologen 2018 (Aachen, 11. September 2018 - 13. September 2018)
In: Chemie Ingenieur Technik (Special Issue: ProcessNet‐Jahrestagung und 33. DECHEMA‐Jahrestagung der Biotechnologen 2018), Weinheim: 2018
DOI: 10.1002/cite.201855147
URL: https://onlinelibrary.wiley.com/doi/abs/10.1002/cite.201855147?af=R
Kunzmann A., Gruber M., Casillas Pacheco R., Zirzlmeier J., Stanzel M., Peukert W., Tykwinski R., Guldi DM.:
Singlet Fission for Photovoltaics with 130 % Injection Efficiency
In: Angewandte Chemie International Edition 57 (2018), p. 10742-10747
ISSN: 1433-7851
DOI: 10.1002/anie.201801041
Kunzmann A., Gruber M., Casillas R., Zirzlmeier J., Stanzel M., Peukert W., Tykwinski RR., Guldi DM.:
Singulettspaltung für Photovoltaikanwendungen mit Injektionseffizienzen von bis zu 130 %
In: Angewandte Chemie 130 (2018), p. 10902-10907
ISSN: 0044-8249
DOI: 10.1002/ange.201801041
Köninger B., Hensler T., Romeis S., Peukert W., Wirth KE.:
Dynamics of fine grinding in a fluidized bed opposed jet mill
In: Powder Technology 327 (2018), p. 346-357
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2017.12.084
Köninger B., Koegl T., Hensler T., Arlt W., Wirth KE.:
Solid distribution in fluidized and fixed beds with horizontal high speed gas jets
In: Powder Technology 336 (2018), p. 57-69
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.05.035
Lee H., Segets D., Süß S., Peukert W., Chen SC., Pui DYH.:
Retention mechanisms of 1.7 nm ZnS quantum dots and sub-20 nm Au nanoparticles in ultrafiltration membranes
In: Journal of Membrane Science 567 (2018), p. 58-67
ISSN: 1873-3123
DOI: 10.1016/j.memsci.2018.09.033
Lübbert C., Peukert W.:
The mass transfer at Taylor cones
In: Journal of Aerosol Science 123 (2018), p. 39-51
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2018.05.014
Meincke T., Jordan M., Vogel N., Klupp Taylor R.:
On the Size-Determining Role of the Comonomer in the Nucleation and Growth of Cationic Polystyrene Latex via Emulsion Polymerization
In: Macromolecular Chemistry and Physics 219 (2018), Article No.: 1700457
ISSN: 1022-1352
DOI: 10.1002/macp.201700457
Meltzer C., Yu H., Peukert W., Braunschweig B.:
Molecular structure of octadecylphosphonic acids during their self-assembly on α-Al2O3(0001)
In: Physical Chemistry Chemical Physics 20 (2018), p. 19382-19389
ISSN: 1463-9076
DOI: 10.1039/c8cp02391c
Mielke L., Bück A., Tsotsas E.:
Multi-zone & multi-compartment model for dynamic simulation of horizontal fluidized bed granulator
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7474
Miguez-Pacheco V., de Ligny D., Schmidt J., Detsch R., Boccaccini AR.:
Development and characterization of niobium-releasing silicate bioactive glasses for tissue engineering applications
In: Journal of the European Ceramic Society 38 (2018), p. 871-876
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2017.07.028
Minguez Bacho I., Scheler F., Büttner P., Bley K., Vogel N., Bachmann J.:
Ordered nanopore arrays with large interpore distances via one-step anodization
In: Nanoscale 10 (2018), p. 8385-8390
ISSN: 2040-3364
DOI: 10.1039/c8nr02215a
Mueller D., Bück A., Tsotsas E.:
Heat and mass transfer modelling of continuous Wurster spray granulation with external product classification
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7269
Münsterjohann B., Labus M., Huber F., Stanzel M., Peukert W., Will S.:
Optical investigations of the droplet formation, evaporation and particle nucleation during the synthesis of zinc oxide nanoparticles in a Flame Spray Pyrolysis Process
37th International Symposium on Combustion (Dublin, Irland, 29. July 2018 - 3. August 2018)
Naseri E., Hajisafari M., Kosari A., Talari M., Hosseinpour S., Davoodi A.:
Inhibitive effect of Clopidogrel as a green corrosion inhibitor for mild steel; statistical modeling and quantum Monte Carlo simulation studies
In: Journal of Molecular Liquids 269 (2018), p. 193-202
ISSN: 0167-7322
DOI: 10.1016/j.molliq.2018.08.050
URL: http://www.sciencedirect.com/science/article/pii/S0167732218311735
Nawaz Q., Ur Rehman MA., Burkovski A., Schmidt J., Beltran AM., Shahid A., Alber NK., Peukert W., Boccaccini AR.:
Synthesis and characterization of manganese containing mesoporous bioactive glass nanoparticles for biomedical applications
In: Journal of Materials Science: Materials in Medicine 29 (2018)
ISSN: 0957-4530
DOI: 10.1007/s10856-018-6070-4
Nawaz Q., Ur Rehman MA., Burkovski A., Schmidt J., Shahid A., Peukert W., Boccaccini AR.:
Synthesis and characterization of manganese containing mesoporous bioactive glass nanoparticles for biomedical applications
In: Journal of Materials Science: Materials in Medicine (2018)
ISSN: 0957-4530
DOI: 10.1007/s10856-018-6070-4
URL: https://link.springer.com/article/10.1007/s10856-018-6070-4
Neugebauer C., Bück A., Palis S., Mielke L., Tsotsas E., Kienle A.:
Influence of thermal conditions on particle properties in fluidized bed layering granulation
In: Processes 6 (2018), Article No.: 235
ISSN: 2227-9717
DOI: 10.3390/pr6120235
Pearson J., Walter J., Peukert W., Coelfen H.:
Advanced Multiwavelength Detection in Analytical Ultracentrifugation
In: Analytical Chemistry 90 (2018), p. 1280-1291
ISSN: 0003-2700
DOI: 10.1021/acs.analchem.7b04056
Rafsanjani-Abbasi A., Rahimi E., Shalchian H., Vahdati-Khaki J., Babakhani A., Hosseinpour S., Davoodi A.:
Recycled Cobalt from Spent Li-ion Batteries as a Superhydrophobic Coating for Corrosion Protection of Plain Carbon Steel
In: Materials 12 (2018)
ISSN: 1996-1944
DOI: 10.3390/ma12010090
URL: https://www.mdpi.com/1996-1944/12/1/90
Rahimi E., Rafsanjani-Abbasi A., Imani A., Hosseinpour S., Davoodi A.:
Insights into galvanic corrosion behavior of Ti-Cu dissimilar joint: Effect of microstructure and volta potential
In: Materials 11 (2018), Article No.: 1820
ISSN: 1996-1944
DOI: 10.3390/ma11101820
Rahimi E., Rafsanjani-Abbasi A., Imani A., Hosseinpour S., Davoodi A.:
Correlation of surface Volta potential with galvanic corrosion initiation sites in solid-state welded Ti-Cu bimetal using AFM-SKPFM
In: Corrosion Science 140 (2018), p. 30-39
ISSN: 0010-938X
DOI: 10.1016/j.corsci.2018.06.026
Rey M., Wendisch JF., Vogel N., Diwald O., Bourret GR., Saller M., Eadie A., Reyer A., Musso M.:
Three-Dimensional Electrochemical Axial Lithography on Si Micro- and Nanowire Arrays
In: Nano Letters 18 (2018), p. 7343-7349
ISSN: 1530-6984
DOI: 10.1021/acs.nanolett.8b03608
Rey M., Yu T., Bley K., Landfester K., Buzza DMA., Vogel N.:
Amphiphile-Induced Anisotropic Colloidal Self-Assembly
In: Langmuir 34 (2018), p. 9990-10000
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.8b01382
Rezendes Tada EF., Bück A., Casciatori FP., Thoméo JC.:
Modelling and simulation of water profiles in a partially filled horizontal drum at low airflow rate
23rd International Congress of Chemical and Process Engineering, CHISA 2018 and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2018 (Prag, 25. August 2018 - 29. August 2018)
In: 23rd International Congress of Chemical and Process Engineering (CHISA 2018) and 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2018) 2018
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85084817847&origin=inward
Rieck C., Schmidt M., Bück A., Tsotsas E.:
Monte Carlo modeling of binder-Less spray agglomeration in fluidized beds
In: Aiche Journal 64 (2018), p. 3582-3594
ISSN: 0001-1541
DOI: 10.1002/aic.16349
Sachs M., Schmidt J., Peukert W., Wirth KE.:
Treatment of polymer powders by combining an atmospheric plasma jet and a fluidized bed reactor
In: Powder Technology 325 (2018), p. 490-497
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2017.11.016
Sadafi FZ., Sauerbeck C., Braunschweig B., Klupp Taylor R.:
On the complex role of ammonia in the electroless deposition of curved silver patches on silica nanospheres
In: Crystengcomm 20 (2018), p. 6214-6224
ISSN: 1466-8033
DOI: 10.1039/C8CE00866C
Schindler T., Lin W., Schmutzler T., Lindner P., Peukert W., Segets D., Unruh T.:
Evolution of the Ligand Shell Around Small ZnO Nanoparticles During the Exchange of Acetate by Catechol: A Small Angle Scattering Study
In: ChemNanoMat 4 (2018), p. 1-9
ISSN: 2199-692X
DOI: 10.1002/cnma.201800465
Schlicht S., Barr M., Wu M., Hoppe P., Spiecker E., Peukert W., Bachmann J.:
Minimization of catalyst loading on regenerative fuel cell positive electrodes based on Ti felts using atomic layer deposition
In: ChemElectroChem 5 (2018), p. 3932-3937
ISSN: 2196-0216
DOI: 10.1002/celc.201801220
Seidel C., Neugebauer C., Durr R., Bück A.:
Robust feedback control of continuously operated convective dryers for particulate materials
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7245
Semmler J., Bley K., Klupp Taylor R., Stingl M., Vogel N.:
Particulate Coatings with Optimized Haze Properties
In: Advanced Functional Materials 5 (2018), Article No.: 1806025
ISSN: 1616-301X
DOI: 10.1002/adfm.201806025
URL: https://onlinelibrary.wiley.com/doi/full/10.1002/adfm.201806025
Sondej F., Peglow M., Bück A., Tsotsas E.:
Experimental investigation of the morphology of salt deposits from drying sessile droplets by white-light interferometry
In: AIChE Journal 64 (2018), p. 2002-2016
ISSN: 1547-5905
DOI: 10.1002/aic.16085
Stauch C., Süß S., Luxenhofer R., Binks BP., Segets D., Mandel K.:
Quantifying Surface Properties of Silica Particles by Combining Hansen Parameters and Reichardt's Dye Indicator Data
In: Particle & Particle Systems Characterization 35 (2018), Article No.: 1800328
ISSN: 0934-0866
DOI: 10.1002/ppsc.201800328
Strenzke G., Golovin ., Wegner M., Palis S., Bück A., Kienle A., Tsotsas E.:
Influence of drying conditions on process properties and parameter identification for continuous fluidized bed spray agglomeration
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7319
Strobel A., Schwenger J., Wittpahl S., Schmidt J., Romeis S., Peukert W.:
Assessing the influence of viscosity and milling bead size on the stressing conditions in a stirred media mill by single particle probes
In: Chemical Engineering Research & Design 136 (2018), p. 859-869
ISSN: 0263-8762
DOI: 10.1016/j.cherd.2018.06.040
Süß S., Metzger C., Damm C., Segets D., Peukert W.:
Quantitative evaluation of nanoparticle classification by size-exclusion chromatography
In: Powder Technology 339 (2018), p. 264-272
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.08.008
Süß S., Sobisch T., Peukert W., Lerche D., Segets D.:
Determination of Hansen parameters for particles: A standardized routine based on analytical centrifugation
In: Advanced Powder Technology (2018)
ISSN: 0921-8831
DOI: 10.1016/j.apt.2018.03.018
Süß S., Sobisch T., Peukert W., Lerche D., Segets D.:
Determination of Hansen parameters for particles: A standardized routine based on analytical centrifugation
In: Advanced Powder Technology 29 (2018), p. 1550-1561
ISSN: 0921-8831
DOI: 10.1016/j.apt.2018.03.018
Tada EFR., Bück A., Casciatori FP., Thomeo JC.:
Drying of sugarcane bagasse in a partially filled horizontal drum
21st International Drying Symposium (IDS) (Valencia, 11. September 2018 - 14. September 2018)
In: IDS'2018: 21ST INTERNATIONAL DRYING SYMPOSIUM, VALENCIA: 2018
DOI: 10.4995/ids2018.2018.7827
Tang JS., Bader RS., Görlitzer E., Wendisch JF., Bourret GR., Rey M., Vogel N.:
Surface Patterning with SiO2@PNiPAm Core–Shell Particles
In: ACS Omega 3 (2018), p. 12089-12098
ISSN: 2470-1343
DOI: 10.1021/acsomega.8b01985
URL: https://pubs.acs.org/doi/abs/10.1021/acsomega.8b01985
Thomele D., Gheisi A., Niedermaier M., Elsaesser MS., Bernardi J., Gronbeck H., Diwald O.:
Thin water films and particle morphology evolution in nanocrystalline MgO
In: Journal of the American Ceramic Society 101 (2018), p. 4994-5003
ISSN: 0002-7820
DOI: 10.1111/jace.15775
Vogelsberger W., Schmidt J.:
Dissolution of commercial nanoscale silica particles in electrolyte solution: The importance of the solid-solvent-ratio to physical and chemical properties of the solid-liquid interface
In: Colloids and Surfaces A-Physicochemical and Engineering Aspects 537 (2018), p. 591-603
ISSN: 0927-7757
DOI: 10.1016/j.colsurfa.2017.07.052
Wang J., Mbah Chrameh F., Przybilla T., Apeleo Zubiri B., Spiecker E., Engel M., Vogel N.:
Magic number colloidal clusters as minimum free energy structures
In: Nature Communications 9 (2018), Article No.: 5259
ISSN: 2041-1723
DOI: 10.1038/s41467-018-07600-4
Wawra S., Pflug L., Thajudeen T., Kryschi C., Stingl M., Peukert W.:
Determination of the two-dimensional distributions of gold nanorods by multiwavelength analytical ultracentrifugation
In: Nature Communications 9 (2018), Article No.: 4898
ISSN: 2041-1723
DOI: 10.1038/s41467-018-07366-9
Wawra S., Thoma M., Walter J., Lübbert C., Thajudeen T., Damm C., Peukert W.:
Ionomer and protein size analysis by analytical ultracentrifugation and electrospray scanning mobility particle sizer
In: European Biophysics Journal 47 (2018), p. 777-787
ISSN: 0175-7571
DOI: 10.1007/s00249-018-1314-2
Wintzheimer S., Granath T., Oppmann M., Kister T., Thai T., Kraus T., Vogel N., Mandel K.:
Supraparticles: Functionality from Uniform Structural Motifs
In: ACS nano 12 (2018), p. 5093-5120
ISSN: 1936-0851
DOI: 10.1021/acsnano.8b00873
Yang T., Segets D., Thajudeen T., Han Y., Peukert W.:
The effect of mixing on silver particle morphology in flow synthesis
In: Chemical Engineering Science 192 (2018), p. 254-263
ISSN: 0009-2509
DOI: 10.1016/j.ces.2018.07.043
Zhao M., Greiner S., Wudy K., Schmidt J., Peukert W., Drummer D.:
Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie
Rapid Tech (Erfurt, 5. June 2018 - 7. June 2018)
In: Proceedings of the 15th Rapid.Tech Conference 2018

Ahmad R., Nicholson KS., Nawaz Q., Peukert W., Distaso M.:
Correlation between product purity and process parameters for the synthesis of Cu2ZnSnS4 nanoparticles using microwave irradiation
In: Journal of Nanoparticle Research 19 (2017), Article No.: 238
ISSN: 1388-0764
DOI: 10.1007/s11051-017-3932-5
Akdas T., Haderlein M., Walter J., Apeleo Zubiri B., Spiecker E., Peukert W.:
Continuous synthesis of CuInS2 quantum dots
In: RSC Advances 7 (2017), p. 10057-10063
ISSN: 2046-2069
DOI: 10.1039/c6ra27052b
Alonso Frank M., Meltzer C., Braunschweig B., Peukert W., Boccaccini AR., Virtanen S.:
Functionalization of steel surfaces with organic acids: Influence on wetting and corrosion behavior
In: Applied Surface Science 404 (2017), p. 326-333
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2017.01.199
Amini S., Kolle S., Petrone L., Ahanotu O., Sunny S., Sutanto CN., Hoon S., Cohen L., Weaver JC., Aizenberg J., Vogel N., Miserez A.:
Preventing mussel adhesion using lubricant-infused materials
In: Science 357 (2017), p. 668-673
ISSN: 0036-8075
DOI: 10.1126/science.aai8977
Bihr T., Sadafi FZ., Smith AS., Klupp Taylor R., Seifert U.:
Radial Growth in 2D Revisited: The Effect of Finite Density, Binding Affinity, Reaction Rates, and Diffusion
In: Advanced Materials Interfaces 4 (2017), Article No.: 1600310
ISSN: 2196-7350
DOI: 10.1002/admi.201600310
URL: http://onlinelibrary.wiley.com/doi/10.1002/admi.201600310/full
Burger A., Srikantharajah R., Peukert W., Hirsch A.:
Individualization and Stabilization of Zinc Oxide Nanorods by Covalent Functionalization with Positively Charged Catechol Derivatives
In: Chemistry - A European Journal 23 (2017), p. 17257-17268
ISSN: 0947-6539
DOI: 10.1002/chem.201702109
Daiko Y., Schmidt J., Kawamura G., Romeis S., Segets D., Iwamoto Y., Peukert W.:
Mechanochemically induced sulfur doping in ZnO via oxygen vacancy formation
In: Physical Chemistry Chemical Physics 19 (2017), p. 13838-13845
ISSN: 1463-9076
DOI: 10.1039/c7cp01489a
Dayani D., Shokuhfar A., Vaezi MR., Rezaei SRJ., Hosseinpour S.:
Structural and mechanical evaluation of a nanocrystalline A1–5 wt %si alloy produced by mechanical alloying
In: Metals 7 (2017), Article No.: 332
ISSN: 2075-4701
DOI: 10.3390/met7090332
Distaso M., Apeleo Zubiri B., Mohtasebi A., Inayat A., Dudak M., Koci P., Butz B., Klupp Taylor R., Schwieger W., Spiecker E., Peukert W.:
Three-dimensional and quantitative reconstruction of non-accessible internal porosity in hematite nanoreactors using 360 degrees electron tomography
In: Microporous and Mesoporous Materials 246 (2017), p. 207-214
ISSN: 1387-1811
DOI: 10.1016/j.micromeso.2017.03.028
Distaso M., Bertoni G., Todisco S., Marras S., Gallo V., Manna L., Peukert W.:
Interplay of Internal Structure and Interfaces on the Emitting Properties of Hybrid ZnO Hierarchical Particles
In: ACS Applied Materials and Interfaces 9 (2017), p. 15182-15191
ISSN: 1944-8244
DOI: 10.1021/acsami.7b00777
Distaso M., Zhuromskyy O., Seemann B., Pflug L., Mackovic M., Encina ER., Klupp Taylor R., Müller R., Leugering G., Spiecker E., Peschel U., Peukert W.:
Interaction of light with hematite hierarchical structures: Experiments and simulations
In: Journal of Quantitative Spectroscopy & Radiative Transfer 189 (2017), p. 369-382
ISSN: 0022-4073
DOI: 10.1016/j.jqsrt.2016.12.028
England GT., Russell C., Shirman E., Kay T., Vogel N., Aizenberg J.:
The Optical Janus Effect: Asymmetric Structural Color Reflection Materials
In: Advanced Materials 29 (2017), Article No.: 1606876
ISSN: 0935-9648
DOI: 10.1002/adma.201606876
Gheisi A., Niedermaier M., Tippelt G., Lottermoser W., Bernardi J., Diwald O.:
Iron Precursor Decomposition in the Magnesium Combustion Flame: A New Approach for the Synthesis of Particulate Metal Oxide Nanocomposites
In: Particle & Particle Systems Characterization 34 (2017), Article No.: 1700109
ISSN: 0934-0866
DOI: 10.1002/ppsc.201700109
Goethelid M., Hosseinpour S., Ahmadi S., Leygraf C., Johnson CM.:
Hexane selenol dissociation on Cu: The protective role of oxide and water
In: Applied Surface Science (2017)
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2017.06.178
Haderlein M., Güldenpfennig A., Segets D., Peukert W.:
A widely applicable tool for modeling precipitation processes
In: Computers & Chemical Engineering 98 (2017), p. 197-208
ISSN: 0098-1354
DOI: 10.1016/j.compchemeng.2016.12.007
Herre P., Romeis S., Mackovic M., Przybilla T., Paul J., Schwenger J., Torun B., Grundmaier G., Spiecker E., Peukert W.:
Deformation behavior of nanocrystalline titania particles accessed by complementary in situ electron microscopy techniques
In: Journal of the American Ceramic Society (2017), p. 1-14
ISSN: 0002-7820
DOI: 10.1111/jace.15072
URL: http://onlinelibrary.wiley.com/doi/10.1111/jace.15072/epdf
Herre P., Romeis S., Mackovic M., Przybilla T., Paul J., Schwenger J., Torun B., Grundmeier G., Spiecker E., Peukert W.:
Deformation behavior of nanocrystalline titania particles accessed by complementary in situ electron microscopy techniques
In: Journal of the American Ceramic Society 100 (2017), p. 5709-5722
ISSN: 0002-7820
DOI: 10.1111/jace.15072
Hosseinpour S., Behzadi S., Stadler J., Crespy D., Landfester K.:
Suppressing non-controlled leakage of hydrophilic payloads from redox-responsive nanocapsules
In: Colloids and Surfaces A-Physicochemical and Engineering Aspects 532 (2017), Article No.: 2-7
ISSN: 0927-7757
DOI: 10.1016/j.colsurfa.2017.07.077
URL: https://www.sciencedirect.com/science/article/abs/pii/S0927775717307355
Hosseinpour S., Johnson M.:
Vibrational Spectroscopy in Studies of Atmospheric Corrosion
In: Materials 10 (2017), p. 413
ISSN: 1996-1944
DOI: 10.3390/ma10040413
URL: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5507006/
Hosseinpour S., Leygraf C., Gretic ZH., Mioc EK., Curkovic HO., Bochmann S., Bachmann J., Waegner V., Virtanen S., Peukert W.:
Self-assembled monolayers as corrosion inhibitors; indoor, marine and biologically relevant exposure
Joint European Corrosion Congress 2017, EUROCORR 2017 and 20th International Corrosion Congress and Process Safety Congress 2017
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85052299563∨igin=inward
Hosseinpour S., Tang F., Wang F., A. Livingstone R., Schlegel S., Ohto T., Bonn M., Nagata Y., Backus E.:
Chemisorbed and Physisorbed Water at the TiO2/Water Interface
In: Journal of Physical Chemistry Letters 8 (2017), p. 2195-2199
ISSN: 1948-7185
DOI: 10.1021/acs.jpclett.7b00564
URL: https://pubs.acs.org/doi/10.1021/acs.jpclett.7b00564
Konnerth CG., Braig V., Schmidt J., Lee G., Peukert W., Ito A.:
Formation of Mefenamic Acid Nanocrystals with Improved Dissolution Characteristics
In: Chemie Ingenieur Technik 89 (2017), p. 1060-1071
ISSN: 0009-286X
DOI: 10.1002/cite.201600190
Köninger B., Hensler T., Schug S., Arlt W., Wirth KE.:
Horizontal secondary gas injection in fluidized beds: Solid concentration and velocity in multiphase jets
In: Powder Technology (2017)
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2017.01.057
Levchuk I., Herre P., Brandl M., Osvet A., Hock R., Peukert W., Schweizer P., Spiecker E., Batentschuk M., Brabec C.:
Ligand-assisted thickness tailoring of highly luminescent colloidal CH3NH3PbX3 (X = Br and I) perovskite nanoplatelets
In: Chemical Communications 53 (2017), p. 244-247
ISSN: 1359-7345
DOI: 10.1039/c6cc09266g
Mackovic M., Przybilla T., Dieker C., Herre P., Romeis S., Stara H., Schrenker N., Peukert W., Spiecker E.:
A novel approach for preparation and in situ tensile testing of silica glass membranes in the TEM
In: Frontiers in Materials (2017)
ISSN: 2296-8016
DOI: 10.3389/fmats.2017.00010
URL: http://journal.frontiersin.org/article/10.3389/fmats.2017.00010/abstract
Madrid M., Saklayen N., Huber M., Vogel N., Mazur E.:
Self-Assembled Laser-Activated Plasmonic Substrates for High-Throughput, High-Efficiency Intracellular Delivery
DOI: 10.1007/978-94-024-0850-8_35
Mandel K., Granath T., Wehner T., Rey M., Stracke W., Vogel N., Sextl G., Mueller-Buschbaum K.:
Smart Optical Composite Materials: Dispersions of Metal-Organic Framework@Superparamagnetic Microrods for Switchable Isotropic-Anisotropic Optical Properties
In: Acs Nano 11 (2017), p. 779-787
ISSN: 1936-0851
DOI: 10.1021/acsnano.6b07189
Meincke T., Bao H., Pflug L., Stingl M., Klupp Taylor R.:
Heterogeneous nucleation and surface conformal growth of silver nanocoatings on colloidal silica in a continuous flow static T-mixer
In: Chemical Engineering Journal 308 (2017), p. 89-100
ISSN: 1385-8947
DOI: 10.1016/j.cej.2016.09.048
Meincke T., Miguez Pacheco V., Hoffmann D., Boccaccini AR., Klupp Taylor R.:
Engineering the surface functionality of 45S5 bioactive glass-based scaffolds by the heterogeneous nucleation and growth of silver particles
In: Journal of Materials Science 52 (2017), p. 9082-9090
ISSN: 0022-2461
DOI: 10.1007/s10853-017-0877-0
Münsterjohann B., Holfelder S., Stanzel M., Peukert W., Will S.:
Optical Investigation of a Flame Spray Pyrolysis Process for the Production of Nanoparticulate Oxides
International Symposium Gas-phase Synthesis of Functional Nanomaterials (Duisburg, 21. March 2017 - 22. March 2017)
Münsterjohann B., Huber F., Stanzel M., Peukert W., Will S.:
Investigation of a flame spray pyrolysis process using several optical measurement techniques
International Congress Engineering of Advanced Materials (Erlangen, 10. October 2017 - 12. October 2017)
Nacken T., Halbig CE., Wawra S., Damm C., Romeis S., Walter J., Tehrani MJ., Hu Y., Ishii Y., Eigler S., Peukert W.:
Structural factors controlling size reduction of graphene oxide in liquid processing
In: Carbon 125 (2017), p. 360-369
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2017.09.066
Niedermaier M., Dolcet P., Gheisi A., Tippelt G., Lottermoser W., Gross S., Bernardi J., Diwald O.:
Stability and local environment of iron in vapor phase grown MgO nanocrystals
In: Journal of Physical Chemistry C 121 (2017)
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.7b07089
Peukert W., Dinkel R., Braunschweig B.:
In situ spectroscopy of ligand exchange reactions at the surface of colloidal gold and silver nanoparticles.
In: Journal of Physics: Condensed Matter 29 (2017), p. 133002
ISSN: 0953-8984
DOI: 10.1088/1361-648X/aa5a3c
Peukert W., Segets D., Süß S., Chen SC., Pui D., Lee H.:
Liquid filtration of nanoparticles through track-etched membrane filters under unfavorable and different ionic strength conditions: Experiments and modeling
In: Journal of Membrane Science 524 (2017), p. 682-690
ISSN: 1873-3123
DOI: 10.1016/j.memsci.2016.11.023
Pfau M., Kunzmann A., Segets D., Peukert W., Wallace GG., Officer DL., Clark T., Costa RD., Guldi DM.:
Choosing the right nanoparticle size-designing novel ZnO electrode architectures for efficient dye-sensitized solar cells
In: Journal of Materials Chemistry A 5 (2017), p. 7516-7522
ISSN: 2050-7488
DOI: 10.1039/c6ta11012f
Przybilla T., Apeleo Zubiri B., Maria Beltran A., Butz B., Machoke A., Inayat A., Distaso M., Peukert W., Schwieger W., Spiecker E.:
Transfer of Individual Micro- and Nanoparticles for High-Precision 3D Analysis Using 360° Electron Tomography
In: Small Methods 2 (2017), p. 1700276
ISSN: 2366-9608
DOI: 10.1002/smtd.201700276
URL: http://onlinelibrary.wiley.com/doi/10.1002/smtd.201700276/abstract
Qazi TH., Hafeez S., Schmidt J., Duda GN., Boccaccini AR., Lippens E.:
Comparison of the effects of 45S5 and 1393 bioactive glass microparticles on hMSC behavior
In: Journal of Biomedical Materials Research Part A 105 (2017), p. 2772-2782
ISSN: 1549-3296
DOI: 10.1002/jbm.a.36131
Ramos Rivera L., Distaso M., Peukert W., Boccaccini AR.:
Electrophoretic deposition of anisotropic α-Fe2O3/PVP/chitosan nanocomposites for biomedical applications
In: Materials Letters 200 (2017), p. 83-86
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2017.04.073
Rey M., Hou X., Tang JS., Vogel N.:
Interfacial arrangement and phase transitions of PNiPAm microgels with different crosslinking densities
In: Soft Matter 13 (2017), p. 8717-8727
ISSN: 1744-683X
DOI: 10.1039/c7sm01558e
Rey M., Law AD., Buzza DMA., Vogel N.:
Anisotropic Self-Assembly from Isotropic Colloidal Building Blocks
In: Journal of the American Chemical Society 139 (2017), p. 17464-17473
ISSN: 0002-7863
DOI: 10.1021/jacs.7b08503
Salaheldin AM., Walter J., Herre P., Levchuk I., Jabbari Y., Kolle J., Brabec C., Peukert W., Segets D.:
Automated synthesis of quantum dot nanocrystals by hot injection: Mixing induced self-focusing
In: Chemical Engineering Journal 320 (2017), p. 232-243
ISSN: 0300-9467
DOI: 10.1016/j.cej.2017.02.154
URL: http://www.sciencedirect.com/science/article/pii/S1385894717303340
Schikarski T., Peukert W., Avila M.:
Direct numerical simulation of water–ethanol flows in a T-mixer
In: Chemical Engineering Journal 324 (2017), p. 168-181
ISSN: 1385-8947
DOI: 10.1016/j.cej.2017.04.119
Schindler T., Schmutzler T., Schmiele M., Lin W., Segets D., Peukert W., Appavou MS., Kriele A., Gilles R., Unruh T.:
Changes within the stabilizing layer of ZnO nanoparticles upon washing
In: Journal of Colloid and Interface Science 504 (2017), p. 356-362
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2017.05.059
Schmidt J., Romeis S., Peukert W.:
Production of PBT/PC particle systems by wet grinding
32nd International Conference of the Polymer Processing Society, PPS 2016
DOI: 10.1063/1.5016720
Schmidt J., Sachs M., Fanselow S., Wirth KE., Peukert W.:
New approaches towards production of polymer powders for selective laser beam melting of polymers
32nd International Conference of the Polymer Processing Society, PPS 2016
DOI: 10.1063/1.5016797
Segets D., Lin W., Schmidt J., Peukert W., Mahler M., Schindler T., Unruh T., Meyer B.:
Influence of Tail Groups during Functionalization of ZnO Nanoparticles on Binding Enthalpies and Photoluminescence
In: Langmuir 33 (2017), p. 13581-13589
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.7b03079
Shrestha S., Fischer R., Matt G., Feldner P., Michel T., Osvet A., Levchuk I., Merle B., Golkar S., Chen H., Tedde SF., Schmidt O., Hock R., Ruehrig M., Göken M., Heiß W., Anton G., Brabec C.:
High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers
In: Nature Photonics 11 (2017), p. 436-+
ISSN: 1749-4885
DOI: 10.1038/NPHOTON.2017.94
Shyshov O., Brachvogel RC., Bachmann T., Srikantharajah R., Segets D., Hampel F., Puchta R., Von Delius M.:
Adaptive Behavior of Dynamic Orthoester Cryptands
In: Angewandte Chemie International Edition 56 (2017), p. 776-781
ISSN: 1433-7851
DOI: 10.1002/anie.201609855
Strobel A., Romeis S., Wittpahl S., Herre P., Schmidt J., Peukert W.:
Characterization of stressing conditions in mills – A comprehensive research strategy based on well-characterized model particles
In: Powder Technology 305 (2017), p. 652-661
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2016.10.048
Taccardi N., Grabau M., Debuschewitz J., Distaso M., Brandl M., Hock R., Maier F., Papp C., Erhard J., Neiß C., Peukert W., Görling A., Steinrück HP., Wasserscheid P.:
Gallium-rich Pd-Ga phases as supported liquid metal catalysts
In: Nature chemistry 9 (2017), p. 862-867
ISSN: 1755-4349
DOI: 10.1038/nchem.2822
Thajudeen T., Walter J., Srikantharajah R., Lübbert C., Peukert W.:
Determination of the length and diameter of nanorods by a combination of analytical ultracentrifugation and scanning mobility particle sizer
In: Nanoscale Horizons 2 (2017), p. 253-260
ISSN: 2055-6756
DOI: 10.1039/c7nh00050b
Thajudeen T., Walter J., Uttinger M., Peukert W.:
A Comprehensive Brownian Dynamics-Based Forward Model for Analytical (Ultra)Centrifugation
In: Particle & Particle Systems Characterization 34 (2017), Article No.: 1600229
ISSN: 0934-0866
DOI: 10.1002/ppsc.201600229
Uttinger M., Walter J., Thajudeen T., Wawra S., Peukert W.:
Brownian dynamics simulations of analytical ultracentrifugation experiments exhibiting hydrodynamic and thermodynamic non-ideality
In: Nanoscale 9 (2017), p. 17770-17780
ISSN: 2040-3364
DOI: 10.1039/c7nr06583c
Walter J., Gorbet G., Akdas T., Segets D., Demeler B., Peukert W.:
2D analysis of polydisperse core-shell nanoparticles using analytical ultracentrifugation
In: Analyst 142 (2017), p. 206-217
ISSN: 0003-2654
DOI: 10.1039/c6an02236g
Wang W., Wang B., Embrechts HE., Damm C., Cadranel A., Strauß V., Distaso M., Hinterberger V., Guldi DM., Peukert W.:
Shedding light on the effective fluorophore structure of high fluorescence quantum yield carbon nanodots
In: RSC Advances 7 (2017), p. 24771-24780
ISSN: 2046-2069
DOI: 10.1039/c7ra04421f
Weichsel U., Segets D., Thajudeen T., Maier EM., Peukert W.:
Enhanced Crystallization of Lysozyme Mediated by the Aggregation of Inorganic Seed Particles
In: Crystal Growth and Design 17 (2017), p. 967-981
ISSN: 1528-7483
DOI: 10.1021/acs.cgd.6b01026
Wolfrum S., Weichsel U., Siedler M., Weber C., Peukert W.:
Monitoring of Flow-Induced Aggregation and Conformational Change of Monoclonal Antibodies
In: Chemie Ingenieur Technik 89 (2017), p. 987-994
ISSN: 0009-286X
DOI: 10.1002/cite.201600161

Babu HV., Sahu S., Haderlein M., Peukert W., Verma N.:
Numerical Investigation of Flow Patterns and Concentration Profiles in Y-Mixers
In: Journal of Chemical Engineering & Process Technology 39 (2016), p. 1963-1971
ISSN: 2157-7048
DOI: 10.1002/ceat.201600083
Braunschweig B., Schulze-Zachau F., Nagel E., Engelhardt K., Stoyanov S., Gochev G., Khristov K., Mileva E., Exerowa D., Miller R., Peukert W.:
Specific effects of Ca2+ ions and molecular structure of β-lactoglobulin interfacial layers that drive macroscopic foam stability
In: Soft Matter 12 (2016), p. 5995-6004
ISSN: 1744-683X
DOI: 10.1039/c6sm00636a
Dinkel R., Braunschweig B., Peukert W.:
2-photon fluorescence of quantum dots for investigations of nanoparticle formation and growth
251st ACS National Meeting (San Diego, 13. March 2016 - 17. March 2016)
In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY 2016
Dinkel R., Braunschweig B., Peukert W.:
In situ spectroscopy of the ligand exchange at the surface of colloidal Au nanoparticles
251st ACS National Meeting (San Diego, 13. March 2016 - 17. March 2016)
In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY 2016
Dinkel R., Braunschweig B., Peukert W.:
Fast and Slow Ligand Exchange at the Surface of Colloidal Gold Nanoparticles
In: Journal of Physical Chemistry C 120 (2016), p. 1673-1682
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.5b11055
Fanselow S., Emamjomeh SE., Wirth KE., Schmidt J., Peukert W.:
Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing
In: Chemical Engineering Science 141 (2016), p. 282-292
ISSN: 0009-2509
DOI: 10.1016/j.ces.2015.11.019
URL: http://www.sciencedirect.com/science/article/pii/S0009250915007368
Flach F., Konnerth CG., Peppersack C., Schmidt J., Damm C., Breitung-Faes S., Peukert W., Kwade A.:
Impact of formulation and operating parameters on particle size and grinding media wear in wet media milling of organic compounds – A case study for pyrene
In: Advanced Powder Technology 27 (2016), p. 2507-2519
ISSN: 0921-8831
DOI: 10.1016/j.apt.2016.09.026
Förster H., Thajudeen T., Funk C., Peukert W.:
Separation of nanoparticles: Filtration and scavenging from waste incineration plants
In: Waste Management 52 (2016), p. 346-352
ISSN: 1879-2456
DOI: 10.1016/j.wasman.2016.03.050
Günther A., Bräuer A., Siegler P., Köninger B., Wirth KE.:
Temperature characteristics in a flash atomization process
In: Atomization and Sprays 26 (2016), p. 1337-1359
ISSN: 1044-5110
DOI: 10.1615/AtomizSpr.2016013961
URL: http://www.dl.begellhouse.com/journals/6a7c7e10642258cc,40f1ad8b3f7a9795,4c786923477543ff.html
Günther A., Lampa A., Fritsching U., Schröder J., Kleinhans A., Gaukel V., Schuchmann H., Loth JM., Petermann M., Wirth KE.:
Benchmarking of Gas-Assisted Atomization Systems for Liquid Disintegration
In: Chemical Engineering & Technology 39 (2016), p. 699-707
ISSN: 0930-7516
DOI: 10.1002/ceat.201500331
Günther A., Wirth KE.:
Superheated atomization
In: Udo Fritsching (ed.): Process-Spray: Functional Particles Produced in Spray Processes, Springer International Publishing, 2016, p. 609-645
ISBN: 9783319323701
DOI: 10.1007/978-3-319-32370-1_16
Halbig CE., Nacken T., Walter J., Damm C., Eigler S., Peukert W.:
Quantitative investigation of the fragmentation process and defect density evolution of oxo-functionalized graphene due to ultrasonication and milling
In: Carbon 96 (2016), p. 897-903
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2015.10.021
Hensler T., Firsching M., Gomez Bonilla JS., Woerlein T., Uhlmann N., Wirth KE.:
Non-invasive investigation of the cross-sectional solids distribution in CFB risers by X-ray computed tomography
In: Powder Technology 297 (2016), p. 247-258
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2016.04.030
Hoffmann B., Bashouti MY., Feichtner T., Mackovic M., Dieker C., Salaheldin AM., Richter P., Gordan OD., Zahn DRT., Spiecker E., Christiansen S., Hoffmann B.:
New insights into colloidal gold flakes: structural investigation, micro-ellipsometry and thinning procedure towards ultrathin monocrystalline layers
In: Nanoscale 8 (2016), p. 4529-4536
ISSN: 2040-3364
DOI: 10.1039/c5nr04439a
Holfelder S., Stanzel M., Peukert W., Will S.:
Optical Characterization of a Flame Spray Pyrolysis Process for the Synthesis of Nanoparticulate Oxides
36th International Symposium on Combustion (Seoul, 31. July 2016 - 5. August 2016)
Saman Hosseinpour, Mattias Forslund, C Magnus Johnson, Jinshan Pan, Christofer Leygraf:
Atmospheric corrosion of Cu, Zn, and Cu–Zn alloys protected by self-assembled monolayers of alkanethiols
In: Surface Science (2016)
ISSN: 0039-6028
DOI: 10.1016/j.susc.2015.10.045
Gretić Z., Mioč E., Čadež V., Šegota S., Ćurković H., Hosseinpour S.:
The influence of thickness of stearic acid self-assembled film on its protective properties
In: Journal of The Electrochemical Society 163 (2016), p. C937-C944
ISSN: 0013-4651
DOI: 10.1149/2.1461614jes
Karg M., Ahuja B., Schmidt J., Winzer B., Wirth KE., Peukert W., Schmidt M.:
Laser Beam Melting in Powder Bed of nonspherical aluminium microparticles dry coated with metal nanoparticles
6th International Conference on Additive Technologies (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (ed.): Proceedings [Elektronski vir] / 6th International Conference on Additive Technologies iCAT2016, Ljubljana: 2016
URL: http://icat.si
Khanzada LS., Levchuk I., Hou Y., Azimi SH., Osvet A., Ahmad R., Brandl M., Herre P., Distaso M., Hock R., Peukert W., Batentschuk M., Brabec C.:
Effective Ligand Engineering of the Cu2ZnSnS4 Nanocrystal Surface for Increasing Hole Transport Efficiency in Perovskite Solar Cells
In: Advanced Functional Materials 26 (2016), p. 8300-8306
ISSN: 1616-301X
DOI: 10.1002/adfm.201603441
Konnerth CG., Flach F., Breitung-Faes S., Damm C., Schmidt J., Kwade A., Peukert W.:
Impact of stressing conditions and polymer-surfactant interactions on product characteristics of organic nanoparticles produced by media milling
In: Powder Technology 294 (2016), p. 71-79
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2016.02.016
Korovin AV., Romanov SG.:
Unconventional optical Tamm states in metal-terminated three-dimensional photonic crystals
In: Physical Review B 93 (2016), Article No.: 115440
ISSN: 1098-0121
DOI: 10.1103/PhysRevB.93.115440
Levchuk I., Hou Y., Gruber M., Brandl M., Herre P., Tang X., Högl F., Batentschuk M., Osvet A., Hock R., Peukert W., Tykwinski R., Brabec C.:
Deciphering the Role of Impurities in Methylammonium Iodide and Their Impact on the Performance of Perovskite Solar Cells
In: Advanced Materials Interfaces (2016)
ISSN: 2196-7350
DOI: 10.1002/admi.201600593
Levchuk I., Högl F., Brandl M., Osvet A., Herre P., Hock R., Schweizer P., Spiecker E., Batentschuk M., Brabec C., Peukert W.:
Organometallic perovskites for optoelectronic applications (Conference Presentation)
Proceedings Volume 9919, Nanophotonic Materials XIII; 99190E (2016) (San Diego, California, 8. November 2016)
In: SPIE Nanoscience + Engineering, 2016 2016
DOI: 10.1117/12.2237101
Levchuk I., Wuerth C., Krause F., Osvet A., Batentschuk M., Resch-Genger U., Kolbeck C., Herre P., Steinrück HP., Peukert W., Brabec C.:
Industrially scalable and cost-effective Mn2+ doped ZnxCd1-xS/ZnS nanocrystals with 70% photoluminescence quantum yield, as efficient down-shifting materials in photovoltaics
In: Energy and Environmental Science 9 (2016), p. 1083-1094
ISSN: 1754-5692
DOI: 10.1039/C5EE03165F
Lin W., Haderlein M., Walter J., Peukert W., Segets D.:
Spectra library: An assumption-free in situ method to access the kinetics of catechols binding to colloidal ZnO quantum dots
In: Angewandte Chemie International Edition 55 (2016), p. 932-935
ISSN: 1433-7851
DOI: 10.1002/anie.201508252
Margraf J., Lodermeyer F., Strauß V., Haines P., Walter J., Peukert W., Costa RD., Clark T., Guldi DM.:
Using carbon nanodots as inexpensive and environmentally friendly sensitizers in mesoscopic solar cells
In: Nanoscale Horizons 1 (2016), p. 220-226
ISSN: 2055-6756
DOI: 10.1039/c6nh00010j
Meric Z., Mehringer C., Jank MPM., Peukert W., Frey L.:
Electrical properties of solution processed layers based on Ge-Si alloy nanoparticles
In: MRS Advances 1 (2016), p. 2331-2336
ISSN: 2059-8521
DOI: 10.1557/adv.2016.329
Mori Y., Yamamoto K., Segets D., Peukert W., Tuchiya K.:
Solvent effects of zinc sulfide quantum dots classified by size selective precipitation
22nd International Congress of Chemical and Process Engineering, CHISA 2016 and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, PRES 2016 (Prag, 27. August 2016 - 31. August 2016)
In: 22nd International Congress of Chemical and Process Engineering (CHISA 2016) and 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2016) 2016
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85050771919∨igin=inward
Paul J., Meltzer C., Braunschweig B., Peukert W.:
Lubrication of Individual Microcontacts by a Self-Assembled Alkyl Phosphonic Acid Monolayer on α-Al2O3(0001)
In: Langmuir 32 (2016), p. 8298-8306
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.6b01933
Peukert W.:
Grundprinzipien der Produktgestaltung
In: Chemie Ingenieur Technik 88 (2016), p. 1351
ISSN: 0009-286X
DOI: 10.1002/cite.201650509
Peukert W., Fanselow S., Schmidt J., Wirth KE.:
Production of micron-sized polymer particles for additive manufacturing by melt emulsification
31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea, 7. June 2015 - 11. June 2015)
In: AIP Publishing LLC. (ed.): Proceedings of PPS-31 2016
DOI: 10.1063/1.4942342
Peukert W., Haderlein M., Segets D., Sterbak M.:
Ein verallgemeinertes Modellierungswerkzeug für die numerisch effiziente Beschreibung mehrphasiger Fällungsprozesse
In: Chemie Ingenieur Technik 88 (2016), p. 1358
ISSN: 0009-286X
DOI: 10.1002/cite.201650358
Peukert W., Ito A., Konnerth CG., Schmidt J.:
Effect of polymer species and concentration on the production of mefenamic acid nanoparticles by media milling
In: European Journal of Pharmaceutics and Biopharmaceutics 98 (2016), p. 98-107
ISSN: 0939-6411
DOI: 10.1016/j.ejpb.2015.11.011
Peukert W., Karabudak E., Brookes E., Lesnyak V., Gaponik N., Eychmüller A., Walter J., Segets D., Wohlleben W., Demeler B., Cölfen H.:
Simultaneous Identification of Spectral Properties and Sizes of Multiple Particles in Solution with Subnanometer Resolution
In: Angewandte Chemie-International Edition 55 (2016), p. 11770-11774
ISSN: 1433-7851
DOI: 10.1002/anie.201603844
Peukert W., Nacken T., Walter J., Thajudeen T., Segets D., Sherwood P., Stafford W.:
Multidimensional Nanoparticle Characterization by Means of Analytical Ultracentrifugation and Multiwavelength Detection
In: Chemie Ingenieur Technik 88 (2016)
ISSN: 0009-286X
DOI: 10.1002/cite.201650214
Peukert W., Sachs M., Schmidt J., Wirth KE.:
Design and scale-up of a semi-industrial downer-reactor for the rounding of irregular polymer particles
31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea, 7. June 2015 - 11. June 2015)
In: 2016 AIP Publishing LLC (ed.): AIP Conference Proceedings 1713 2016
DOI: 10.1063/1.4942289
Peukert W., Segets D., Chen SC., Ling TY., Pui D.:
An experimental study of ultrafiltration for sub-10nm quantum dots and sub-150 nm nanoparticles through PTFE membrane and Nuclepore filters
In: Journal of Membrane Science 497 (2016)
ISSN: 1873-3123
DOI: 10.1016/j.memsci.2015.09.022
Peukert W., Stanzel M., Kunzmann A., Guldi DM., Costa Riquelme RD.:
Binary Indium-Zinc Oxide Photoanodes for Efficient Dye-Sensitized Solar Cells
In: Advanced Energy Materials 6 (2016), Article No.: 1501075
ISSN: 1614-6832
DOI: 10.1002/aenm.201501075
Peukert W., Walter J.:
Dynamic range multiwavelength particle characterization using analytical ultracentrifugation.
In: Nanoscale 8 (2016), p. 7484-95
ISSN: 2040-3364
DOI: 10.1039/c5nr08547k
Phillips KR., England GT., Sunny S., Shirman E., Shirman T., Vogel N., Aizenberg J.:
A colloidoscope of colloid-based porous materials and their uses
In: Chemical Society Reviews 45 (2016), p. 281-322
ISSN: 0306-0012
DOI: 10.1039/c5cs00533g
Romanov S., Orlov S., Ploss D., Weiss CK., Vogel N., Peschel U.:
Engineered disorder and light propagation in a planar photonic glass
In: Scientific Reports 6 (2016), Article No.: 27264
ISSN: 2045-2322
DOI: 10.1038/srep27264
Romeis S., Köninger B., Strobel A., Wirth KE., Peukert W.:
Prallzerkleinerung in Fließbettgegenstrahlmühlen: Vom Einzelkorn zur Mühle
In: Chemie Ingenieur Technik 88 (2016), p. 1358-1359
ISSN: 0009-286X
DOI: 10.1002/cite.201650220
Romeis S., Schmidt J., Peukert W.:
Mechanochemical aspects in wet stirred media milling
In: International Journal of Mineral Processing 156 (2016), p. 24-31
ISSN: 0301-7516
DOI: 10.1016/j.minpro.2016.05.018
Sachs M., Friedle M., Schmidt J., Peukert W., Wirth KE.:
Characterization of a downer reactor for particle rounding
In: Powder Technology (2016)
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2017.01.006
Schmidt J., Gomez Bonilla JS., Sachs M., Lanzl L., Wudy K., Wirth KE., Drummer D., Peukert W.:
Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering
26th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 8. August 2016 - 10. August 2016)
Schmidt J., Sachs M., Fanselow S., Wirth KE., Peukert W.:
Novel approaches for the production of polymer powders for selective laser beam melting of polymers
27th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2016 (Austin, Texas, 8. August 2016 - 10. August 2016)
In: Solid Freeform Fabrication 2016: Proceedings of the 26th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2016
Open Access: https://www.sffsymposium.org/
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85058166373&origin=inward
Schmidt J., Sachs M., Fanselow S., Wirth KE., Peukert W.:
Herstellung und Funktionalisierung neuartiger Pulverwerkstoffe für die additive Fertigung
In: Chemie Ingenieur Technik 88 (2016)
ISSN: 0009-286X
DOI: 10.1002/cite.201650354
Schmidt J., Sachs M., Fanselow S., Zhao M., Romeis S., Drummer D., Wirth KE., Peukert W.:
Optimized polybutylene terephthalate powders for selective laser beam melting
In: Chemical Engineering Science 156 (2016), p. 1-10
ISSN: 0009-2509
DOI: 10.1016/j.ces.2016.09.009
Schmidt J., Sachs M., Zhao M., Fanselow S., Wudy K., Drexler M., Drummer D., Wirth KE., Peukert W.:
A novel process for production of spherical PBT powders and their processing behavior during laser beam melting
31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea, 7. June 2015 - 11. June 2015)
In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016
DOI: 10.1063/1.4942343
Schuster J., Siegler P., Günther A., Wirth KE., Bräuer A.:
Simultaneous analysis of the dispersed liquid and the bulk gas phase of water sprays using Raman spectroscopy
In: Applied Spectroscopy 70 (2016), p. 1055-1062
ISSN: 0003-7028
URL: https://www.osapublishing.org/as/abstract.cfm?uri=as-70-6-1055
Segets D.:
Analysis of particle size distributions of quantum dots: From theory to application
In: KONA Powder and Particle Journal 2016 (2016), p. 48-62
ISSN: 2187-5537
DOI: 10.14356/kona.2016012
Srikantharajah R., Gerstner K., Romeis S., Peukert W.:
Polarized Raman scattering and SEM combined full characterization of self-assembled nematic thin films
In: Nanoscale 8 (2016), p. 7672-7682
ISSN: 2040-3364
DOI: 10.1039/c6nr01440b
Srikantharajah R., Schindler T., Landwehr I., Romeis S., Unruh T., Peukert W.:
From evaporation-induced self-assembly to shear-induced alignment
In: Nanoscale 8 (2016), p. 19882-19893
ISSN: 2040-3364
DOI: 10.1039/c6nr06586d
Strauß V., Kahnt A., Zolnhofer E., Meyer K., Maid H., Placht C., Bauer W., Nacken T., Peukert W., Etschel S., Halik M., Guldi DM.:
Assigning Electronic States in Carbon Nanodots
In: Advanced Functional Materials 26 (2016), p. 7975-7985
ISSN: 1616-301X
DOI: 10.1002/adfm.201602325
URL: http://onlinelibrary.wiley.com/doi/10.1002/adfm.201602325/full
Sunny S., Cheng G., Daniel D., Lo P., Ochoa S., Howell C., Vogel N., Majid A., Aizenberg J.:
Transparent antifouling material for improved operative field visibility in endoscopy
In: Proceedings of the National Academy of Sciences of the United States of America 113 (2016), p. 11676-11681
ISSN: 0027-8424
DOI: 10.1073/pnas.1605272113
Süß S., Sobisch T., Lerche D., Mori Y., Peukert W., Segets D.:
Classification of Nanoparticles by Size-Selective Precipitation: The Role of Solubility Parameters
In: Chemie Ingenieur Technik 88 (2016), p. 1299
ISSN: 0009-286X
DOI: 10.1002/cite.201650451
Thomele D., Siedl N., Bernardi J., Diwald O.:
Electronic Reducibility Scales with Intergranular Interface Area in Consolidated In2O3 Nanoparticles Powders
In: Journal of Physical Chemistry C 120 (2016), p. 4581-4588
ISSN: 1932-7447
DOI: 10.1021/acs.jpcc.5b10648
Utech S., Bley K., Aizenberg J., Vogel N.:
Tailoring re-entrant geometry in inverse colloidal monolayers to control surface wettability
In: Journal of Materials Chemistry A 4 (2016), p. 6853-6859
ISSN: 2050-7488
DOI: 10.1039/c5ta08992a
Walter J., Segets D., Peukert W.:
Extension of the Deep UV-Capabilities in Multiwavelength Spectrometry in Analytical Ultracentrifugation: The Role of Oil Deposits
In: Particle & Particle Systems Characterization 33 (2016), p. 184-189
ISSN: 0934-0866
DOI: 10.1002/ppsc.201500212
Zakharko Y., Held M., Sadafi FZ., Gannott F., Mandavi A., Peschel U., Klupp Taylor R., Zaumseil J.:
On-Demand Coupling of Electrically Generated Excitons with Surface Plasmons via Voltage-Controlled Emission Zone Position
In: ACS Photonics 3 (2016), p. 1-7
ISSN: 2330-4022
DOI: 10.1021/acsphotonics.5b00413
Zhou X., Liu N., Schmidt J., Kahnt A., Osvet A., Romeis S., Zolnhofer E., Marthala V., Guldi DM., Peukert W., Hartmann M., Meyer K., Schmuki P.:
Noble-Metal-Free Photocatalytic Hydrogen Evolution Activity: The Impact of Ball Milling Anatase Nanopowders with TiH2
In: Advanced Materials (2016)
ISSN: 0935-9648
DOI: 10.1002/adma.201604747

Ahmad R., Brandl M., Distaso M., Herre P., Spiecker E., Hock R., Peukert W.:
A comprehensive study on the mechanism behind formation and depletion of Cu2ZnSnS4 (CZTS) phases
In: Crystengcomm 17 (2015), p. 6972-6984
ISSN: 1466-8033
DOI: 10.1039/c5ce00661a
Akdas T., Distaso M., Kuhri S., Winter B., Birajdar B., Spiecker E., Guldi DM., Peukert W.:
The effects of post-processing on the surface and the optical properties of copper indium sulfide quantum dots
In: Advances in Colloid and Interface Science 445 (2015), p. 337--347
ISSN: 0001-8686
DOI: 10.1016/j.jcis.2015.01.014
Akdas T., Walter J., Segets D., Distaso M., Winter B., Birajdar B., Spiecker E., Peukert W.:
Investigation of the size-property relationship in CuInS2 quantum dots
In: Nanoscale 7 (2015), p. 18105-18118
ISSN: 2040-3364
DOI: 10.1039/c5nr04291g
Ballantyne G., Peukert W., Powell M.:
Size specific energy (SSE) - Energy required to generate minus 75 micron material
In: International Journal of Mineral Processing 136 (2015), p. 2-6
ISSN: 0301-7516
DOI: 10.1016/j.minpro.2014.09.010
Baumann SO., Schneider J., Sternig A., Thomele D., Stankic S., Berger T., Gronbeck H., Diwald O.:
Size effects in MgO cube dissolution
In: Langmuir 31 (2015), p. 2770-2776
ISSN: 0743-7463
DOI: 10.1021/la504651v
Beierlein F., Clark T., Braunschweig B., Engelhardt K., Glas L., Peukert W.:
Carboxylate Ion Pairing with Alkali-Metal Ions for β-Lactoglobulin and Its Role on Aggregation and Interfacial Adsorption
In: Journal of Physical Chemistry B 119 (2015), p. 5505-5517
ISSN: 1520-6106
DOI: 10.1021/acs.jpcb.5b01944
Blümel C., Sachs M., Laumer T., Winzer B., Schmidt J., Schmidt M., Peukert W., Wirth KE.:
Increasing flowability and bulk density of PE-HD powders by a dry particle coating process and impact on LBM processes
In: Rapid Prototyping Journal 21 (2015), p. 697-704
ISSN: 1355-2546
DOI: 10.1108/RPJ-07-2013-0074
Brandl M., Ahmad R., Distaso M., Azimi H., Hou Y., Peukert W., Brabec C., Hock R.:
In-Situ X-ray Diffraction Analysis of the Recrystallization Process in Cu2ZnSnS4 Nano Particles Synthesized by Hot-Injection
In: Thin Solid Films 582 (2015), p. 269-271
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2014.10.077
Brandl M., Ahmad R., Distaso M., Azimi SH., Hou Y., Peukert W., Brabec C., Hock R.:
In-situ X-ray diffraction analysis of the recrystallization process in Cu2ZnSnS4nanoparticles synthesised by hot-injection
In: Thin Solid Films 582 (2015), p. 269-271
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2014.10.077
Burger A., Costa RD., Lobaz V., Peukert W., Hirsch A., Guldi DM.:
Layer-by-Layer Assemblies of Catechol-Functionalized TiO2 Nanoparticles and Porphyrins through Electrostatic Interactions
In: Chemistry - A European Journal 21 (2015), p. 5041-5054
ISSN: 0947-6539
DOI: 10.1002/chem.201405039
Cabanas Polo S., Distaso M., Peukert W., Boccaccini AR.:
Electrophoretic Deposition of alpha-Fe2O3/Chitosan Nanocomposite Coatings for Functional and Biomedical Applications
In: Journal of Nanoscience and Nanotechnology 15 (2015), p. 10149-10155
ISSN: 1533-4880
DOI: 10.1166/jnn.2015.11685
Damm C., Armstrong P., Roßkopf C., Romeis S., Peukert W.:
Mechanically induced phase transformation of zinc sulfide
In: Particuology 18 (2015), p. 1-10
ISSN: 1674-2001
DOI: 10.1016/j.partic.2014.05.003
Damm C., Nacken T., Peukert W.:
Quantitative evaluation of delamination of graphite by wet media milling
In: Carbon 81 (2015), p. 284-294
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2014.09.059
Dehe D., Wang L., Mueller MK., Doerr G., Zhou Z., Klupp-Taylor RN., Sun Y., Ernst S., Hartmann M., Bauer M., Thiel WR., Klupp Taylor R.:
A Rhodium Triphenylphosphine Catalyst for Alkene Hydrogenation Supported on Neat Superparamagnetic Iron Oxide Nanoparticles
In: ChemCatChem 7 (2015), p. 127-136
ISSN: 1867-3880
DOI: 10.1002/cctc.201402615
Esper J., Scherzer S., Stary Z., Pavlova E.:
Phase structure, rheology and electrical conductivity of co-continuous polystyrene/polymethylmethacrylate blends filled with carbon black
In: Composites Science and Technology 119 (2015), p. 138-147
ISSN: 0266-3538
DOI: 10.1016/j.compscitech.2015.10.003
Fanselow S., Schmidt J., Wirth KE., Peukert W.:
Production of Micron-Sized particles by melt emulsification
8th International Conference for Conveying and Handling of Particulate Solids, CHoPS 2015 (Tel Aviv, 3. May 2015 - 7. May 2015)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84964017432&origin=inward
Friedlander RS., Vogel N., Aizenberg J.:
Role of Flagella in Adhesion of Escherichia coli to Abiotic Surfaces
In: Langmuir 31 (2015), p. 6137-6144
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.5b00815
Gheisi A., Sternig A., Redhammer GJ., Diwald O.:
Thin water films and magnesium hydroxide fiber growth
In: RSC Advances 5 (2015), p. 82564-82569
ISSN: 2046-2069
DOI: 10.1039/c5ra18202f
Haderlein M., Segets D., Gröschel M., Pflug L., Leugering G., Peukert W.:
FIMOR: An efficient simulation for ZnO quantum dot ripening applied to the optimization of nanoparticle synthesis
In: Chemical Engineering Journal 260 (2015), p. 706--715
ISSN: 0300-9467
DOI: 10.1016/j.cej.2014.09.040
Hensler T., Tupy M., Strer T., Pöschel T., Wirth KE.:
Positron emission particle tracking in fluidized beds with secondary gas injection
In: Powder Technology 279 (2015), p. 113-122
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2015.04.005
Hensler T., Tupy M., Strer T., Pöschel T., Wirth KE.:
Particle Tracking in Fluidized Beds with Secondary Gas Injection
In: Procedia Engineering 102 (2015), p. 850-857
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.01.204
Hensler T., Tupy M., Strer T., Pöschel T., Wirth KE.:
Particle tracking in fluidized beds with secondary gas injection
7th World Congress on Particle Technology, WCPT 2014
DOI: 10.1016/j.proeng.2015.01.204
Hirsch A., Peukert W., Zeininger L., Klaumünzer M.:
Surface Modification of ZnO Nanorods with Hamilton Receptors
In: International Journal of Molecular Sciences 16 (2015), p. 8186--8200
ISSN: 1422-0067
DOI: 10.3390/ijms16048186
Mattias Forslund, Jinshan Pan, Saman Hosseinpour, Fan Zhang, Magnus Johnson, Per Claesson, Christofer Leygraf:
Corrosion Inhibition of Two Brass Alloys by Octadecanethiol in Humidified Air with Formic Acid
In: Corrosion (2015)
ISSN: 0010-9312
DOI: 10.5006/1648
Karg M., Ahuja B., Schaub A., Schmidt J., Sachs M., Mahr A., Wiesenmayer S., Wigner L., Wirth KE., Peukert W., Merklein M., Schmidt M.:
Effect of process conditions on mechanical behavior of aluminium wrought alloy EN AW-2618 additively manufactured by Laser Beam Melting in powder bed
Lasers in Manufacturing Conference 2015 (Messe München, 22. June 2015 - 25. June 2015)
In: Proceedings of Laser in Manfacturing Conference 2015 2015
Open Access: http://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution146_final.pdf
URL: http://www.wlt.de/lim/Proceedings/Stick/4.html
Khanolkar A., Wallen S., Ghanem MA., Jenks J., Vogel N., Boechler N.:
A self-assembled metamaterial for Lamb waves
In: Applied Physics Letters 107 (2015), Article No.: 071903
ISSN: 0003-6951
DOI: 10.1063/1.4928564
Kiefer J., Toni F., Wirth KE.:
Influence of carbon-coated iron nanoparticles on the Raman spectrum of liquid ethanol
In: Journal of Raman Spectroscopy 46 (2015), p. 1124-1128
ISSN: 0377-0486
DOI: 10.1002/jrs.4743
Klupp Taylor R., Encina ER., Distaso M., Taylor RNK., Peukert W.:
Synthesis of Goethite α-FeOOH Particles by Air Oxidation of Ferrous Hydroxide Fe(OH)2 Suspensions: Insight on the Formation Mechanism
In: Crystal Growth & Design 15 (2015), p. 194-203
ISSN: 1528-7483
DOI: 10.1021/cg501191h
Lin W., Walter J., Burger A., Maid H., Hirsch A., Peukert W., Segets D.:
A General Approach To Study the Thermodynamics of Ligand Adsorption to Colloidal Surfaces Demonstrated by Means of Catechols Binding to Zinc Oxide Quantum Dots
In: Chemistry of Materials 27 (2015), p. 358--369
ISSN: 0897-4756
DOI: 10.1021/cm504080d
Marthala V., Friedrich M., Zhou Z., Distaso M., Reuß S., Al-Thabaiti SA., Peukert W., Schwieger W., Hartmann M.:
Zeolite-Coated Porous Arrays: A Novel Strategy for Enzyme Encapsulation
In: Advanced Functional Materials 25 (2015), p. 1832--1836
ISSN: 1616-301X
DOI: 10.1002/adfm.201404335
Mehringer C., Kloner C., Butz B., Winter B., Spiecker E., Peukert W.:
Germanium-silicon alloy and core-shell nanocrystals by gas phase synthesis
In: Nanoscale 7 (2015), p. 5186--5196
ISSN: 2040-3364
DOI: 10.1039/c4nr06318j
Meltzer C., Dietrich H., Zahn D., Peukert W., Braunschweig B.:
Self-Assembled Monolayers Get Their Final Finish via a Quasi-Langmuir-Blodgett Transfer
In: Langmuir (2015), p. n/a
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.5b00440
Möckel S., Wernicke T., Arzig M., Köder P., Brandl M., Ahmad R., Distaso M., Peukert W., Hock R., Wellmann P.:
Low temperature formation of CuIn1 - xGaxSe2solar cell absorbers by all printed multiple species nanoparticulate Se + Cu-In + Cu-Ga precursors
In: Thin Solid Films 582 (2015), p. 60-68
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2014.11.060
Nacken T., Damm C., Walter J., Rüger A., Peukert W.:
Delamination of graphite in a high pressure homogenizer
In: RSC Advances 5 (2015), p. 57328-57338
ISSN: 2046-2069
DOI: 10.1039/c5ra08643d
Nacken T., Damm C., Xing H., Rüger A., Peukert W.:
Determination of quantitative structure-property and structure-process relationships for graphene production in water
In: Nano Research 8 (2015), p. 1865-1881
ISSN: 1998-0000
DOI: 10.1007/s12274-014-0694-6
Paul J., Romeis S., Herre P., Peukert W.:
Deformation behavior of micron-sized polycrystalline gold particles studied by in situ compression experiments and frictional finite element simulation
In: Powder Technology 286 (2015), p. 706-715
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2015.09.020
Paul J., Romeis S., Mackovic M., Marthala V., Herre P., Przybilla T., Hartmann M., Spiecker E., Schmidt J., Peukert W.:
In situ cracking of silica beads in the SEM and TEM - Effect of particle size on structure-property correlations
In: Powder Technology 270 (2015), p. 337--347
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2014.10.026
Peukert W., Hartig MAJ., Jacobsen N., Leuthold A.:
A model-based precipitation study of copper-based catalysts
In: AIChE Journal 61 (2015), p. 2104-2116
ISSN: 1547-5905
DOI: 10.1002/aic.14810
Peukert W., Kind M., Rehage H., Schuchmann H.:
Colloid process engineering
Springer International Publishing, 2015
ISBN: 9783319151281
DOI: 10.1007/978-3-319-15129-8
Peukert W., Lutz C., Yamamoto K., Komada S., Süß S., Mori Y., Segets D.:
Classification of Zinc Sulfide Quantum Dots by Size: Insights into the Particle Surface–Solvent Interaction of Colloids
In: Journal of Physical Chemistry C 119 (2015), p. 4009-4022
ISSN: 1932-7447
DOI: 10.1021/jp508746s
Peukert W., Meric Z., Mehringer C., Jank M., Frey L., Karpstein N.:
Tunable conduction type of solution-processed germanium nanoparticle based field effect transistors and their inverter integration
In: Physical Chemistry Chemical Physics 17 (2015), p. 22106-22114
ISSN: 1463-9076
DOI: 10.1039/c5cp03321g
Peukert W., Paul J., Koch T., Yoshida M., Sanagawa T., Okano Si., Oshitani J., Yamamoto H., Gotoh K.:
Effects of an adhesive force of admixed particles on compressed packing fractions in a particle bed
In: Advanced Powder Technology 26 (2015), p. 626-631
ISSN: 0921-8831
DOI: 10.1016/j.apt.2015.01.014
Peukert W., Schmidt J., Sachs M., Fanselow S., Wirth KE.:
New approach towards production of optimized polymer powders for additive manufacturing
8th International Conference for Conveying and Handling of Particulate Solids, CHoPS 2015 (Tel Aviv, 3. May 2015 - 7. May 2015)
In: 8th International Conference for Conveying and Handling of Particulate Solids (CHoPS2015) 2015
DOI: 10.1080/02726351.2016.1190902
Peukert W., Segets D.:
Process engineering of nanoparticles below 20 nm—a fundamental discussion of characterization, particle formation, stability and post processing
Springer International Publishing, 2015
(Colloid Process Engineering, Vol.II)
ISBN: 9783319151281
DOI: 10.1007/978-3-319-15129-8_12
Peukert W., Segets D., Haderlein M., Pflug L., Leugering G., Gröschel M.:
From in situ characterization to process control of quantum dot systems
7th World Congress on Particle Technology, WCPT 2014 (Bejing, 19. May 2014 - 22. May 2014)
DOI: 10.1016/j.proeng.2015.01.129
Peukert W., Segets D., Pflug L., Leugering G.:
Unified Design Strategies for Particulate Products
Academic Press Inc., 2015
(Advances in Chemical Engineering, Vol.46)
ISBN: 978-0-12-801247-5
DOI: 10.1016/bs.ache.2015.10.004
Peukert W., Walter J., Lin W., Segets D., Sherwood P., Stafford W.:
Simultaneous Analysis of Hydrodynamic and Optical Properties Using Analytical Ultracentrifugation Equipped with Multiwavelength Detection
In: Analytical Chemistry 87 (2015), p. 3396--3403
ISSN: 0003-2700
DOI: 10.1021/ac504649c
Peukert W., Wang W., Damm C., Walter J., Nacken T.:
Photobleaching and stabilization of carbon nanodots produced by solvothermal synthesis.
In: Physical Chemistry Chemical Physics 18 (2015), p. 466-475
ISSN: 1463-9076
DOI: 10.1039/c5cp04942c
Romeis S., Hoppe A., Detsch R., Boccaccini AR., Schmidt J., Peukert W.:
Top-down processing of submicron 45S5 Bioglass (R) for enhanced in vitro bioactivity and biocompatibility
DOI: 10.1016/j.proeng.2015.01.116
Romeis S., Hoppe A., Detsch R., Boccaccini AR., Schmidt J., Peukert W.:
Top-down processing of submicron 45S5 Bioglass® for enhanced in vitro bioactivity and biocompatibility
In: Procedia Engineering 102 (2015), p. 534-541
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.01.116
Romeis S., Paul J., Herre P., Hanisch M., Klupp Taylor R., Schmidt J., Peukert W.:
In situ deformation and breakage of silica particles inside a SEM
7th World Congress on Particle Technology, WCPT 2014
DOI: 10.1016/j.proeng.2015.01.128
Romeis S., Paul J., Herre P., de Ligny D., Schmidt J., Peukert W.:
Local densification of a single micron sized silica sphere by uniaxial compression
In: Scripta Materialia 108 (2015), p. 84-87
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2015.06.023
URL: http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000360250700021&KeyUID=WOS:000360250700021
Romeis S., Peukert W., Paul J.:
Mechanical particle properties - design, characterization and application
8th International Conference for Conveying and Handling of Particulate Solids, CHoPS 2015
In: International Conference for Conveying and Handling of Particulate Solids (CHoPS2015) 2015
DOI: 10.1080/02726351.2016.1190902
Sachs M., Schmidt J., Peukert W., Wirth KE.:
Functionalization of polymer particles for additive manufacturing processes by plasma treatment in a fluidized bed reactor
8th International Conference for Conveying and Handling of Particulate Solids, CHoPS 2015 (Tel Aviv, Israel, 3. May 2015 - 7. May 2015)
DOI: 10.1080/02726351.2016.1190902
Sachs M., Schmidt J., Toni F., Blümel C., Winzer B., Peukert W., Wirth KE.:
Rounding of irregular polymer particles in a downer reactor
7th World Congress on Particle Technology, WCPT 2014 (Bejing, 19. May 2014 - 22. May 2014)
In: Procedia Engineering 102 2015
DOI: 10.1016/j.proeng.2015.01.119
Sachs M., Schmitt A., Schmidt J., Peukert W., Wirth KE.:
Functionalization of polymer powders for SLS-processes using an atmospheric plasma jet in a fluidized bed reactor
30th International Conference of the Polymer Processing Society, PPS 2014 (Cleveland, 8. June 2014 - 12. June 2014)
In: AIP Conference Proceedings 1664 2015
DOI: 10.1063/1.4918517
Schaffner M., England G., Kolle M., Aizenberg J., Vogel N.:
Combining Bottom-Up Self-Assembly with Top-Down Microfabrication to Create Hierarchical Inverse Opals with High Structural Order
In: Small 11 (2015), p. 4334-4340
ISSN: 1613-6829
DOI: 10.1002/smll.201500865
Schindler T., Schmiele M., Schmutzler T., Kassar T., Segets D., Peukert W., Radulescu A., Kriele A., Gilles R., Unruh T.:
A Combined SAXS/SANS Study for the in Situ Characterization of Ligand Shells on Small Nanoparticles: The Case of ZnO
In: Langmuir 31 (2015), p. 10130-10136
ISSN: 0743-7463
DOI: 10.1021/acs.langmuir.5b02198
Schindler T., Walter J., Peukert W., Segets D., Unruh T.:
In Situ Study on the Evolution of Multimodal Particle Size Distributions of ZnO Quantum Dots: Some General Rules for the Occurrence of Multimodalities
In: Journal of Physical Chemistry B 119 (2015), p. 15370-15380
ISSN: 1520-6106
DOI: 10.1021/acs.jpcb.5b08005
Schmidt J., Romeis S., Konnerth CG., Damm C., Peukert W.:
Formation of nanoemulsions by stirred media milling
7th World Congress on Particle Technology, WCPT 2014 (Bejing, 19. May 2014 - 22. May 2014)
In: Proceedings 7th World Congress on Particle Technology, WCPT 2014 2015
DOI: 10.1016/j.proeng.2015.01.125
Schmidt J., Sachs M., Blümel C., Winzer B., Toni F., Wirth KE., Peukert W.:
A novel process route for the production of spherical SLS polymer powders
30th International Conference of the Polymer Processing Society, PPS 2014 (Cleveland,Ohio, 6. June 2014 - 12. June 2014)
In: American Institute of physics (ed.): Proceedings of PPS-30 : the 30th International Conference of the Polymer Processing Society : conference papers : 6-12 June 2014, Cleveland, Ohio, USA 2015
DOI: 10.1063/1.4918518
Schmidt J., Sachs M., Blümel C., Winzer B., Toni F., Wirth KE., Peukert W.:
A novel process chain for the production of spherical sls polymer powders with good flowability
7th World Congress on Particle Technology, WCPT 2014 (Bejing, 19. May 2014 - 22. May 2014)
In: Proceedings of the 7th World Congress on Particle Technology, WCPT 2014 2015
DOI: 10.1016/j.proeng.2015.01.123
Schuster J., Siegler P., Bräuer A., Will S.:
Thermodynamic characterization of water and alcohol sprays using Raman spectroscopy
28th European Symposium on Applied Thermodynamics (Athen, 11. June 2015 - 14. June 2015)
Schuster M., Distaso M., Möckel S., Künecke U., Peukert W., Wellmann P.:
Synthesis of In2Se3 and Cu2-xSe Micro- and Nanoparticles with Microwave-Assisted Solvothermal and Aqueous Redox Reactions for the Preparation and Stabilization of Printable Precursors for a CuInSe2 Solar Cell Absorber Layer
DOI: 10.1016/j.egypro.2015.12.296
Schuster M., Distaso M., Möckel S., Künecke U., Peukert W., Wellmann P.:
Synthesis of In2Se3 and Cu2-xSe Micro- and Nanoparticles with Microwave-Assisted Solvothermal and Aqueous Redox Reactions for the Preparation and Stabilization of Printable Precursors for a CuInSe2 Solar Cell Absorber Layer
In: Energy Procedia 84 (2015), p. 62-70
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2015.12.296
Segets D., Milek T., Kirschbaum R., von Gernler M., Lübbert C., Drewello T., Peukert W., Zahn D.:
On the mechanism of Zn4O-acetate precursors ripening to ZnO: How dimerization is promoted by hydroxide incorporation
In: Journal of Chemical Physics 143 (2015), Article No.: 064501
ISSN: 0021-9606
DOI: 10.1063/1.4928190
Sternig A., Bernardi J., Mckenna K., Diwald O.:
Surface-specific visible light luminescence from composite metal oxide nanocrystals
In: Journal of Materials Science 50 (2015), p. 8153-8165
ISSN: 0022-2461
DOI: 10.1007/s10853-015-9393-2
Toni F., Xing H., Walter J., Strauß V., Nacken T., Damm C., Wirth KE., Guldi DM., Peukert W.:
Production of well dispersible single walled carbon nanotubes via a "floating catalyst"-method
In: Chemical Engineering Science 138 (2015), p. 385-395
ISSN: 0009-2509
DOI: 10.1016/j.ces.2015.08.002
Vogel N., Retsch M., Fustin CA., Del Campo A., Jonas U.:
Advances in Colloidal Assembly: The Design of Structure and Hierarchy in Two and Three Dimensions
In: Chemical Reviews 115 (2015), p. 6265-6311
ISSN: 0009-2665
DOI: 10.1021/cr400081d
Vogel N., Utech S., England GT., Shirman T., Phillips KR., Koay N., Burgess IB., Kolle M., Weitz DA., Aizenberg J.:
Color from hierarchy: Diverse optical properties of micron-sized spherical colloidal assemblies
In: Proceedings of the National Academy of Sciences of the United States of America 112 (2015), p. 10845-10850
ISSN: 0027-8424
DOI: 10.1073/pnas.1506272112
Walter J., Thajudeen T., Süß S., Segets D., Peukert W.:
New possibilities of accurate particle characterisation by applying direct boundary models to analytical centrifugation
In: Nanoscale 7 (2015), p. 6574--6587
ISSN: 2040-3364
DOI: 10.1039/c5nr00995b
Weichsel U., Segets D., Janeke S., Peukert W.:
Enhanced Nucleation of Lysozyme Using Inorganic Silica Seed Particles of Different Sizes
In: Crystal Growth and Design 15 (2015), p. 3582-3593
ISSN: 1528-7483
DOI: 10.1021/cg501681g
Wirth KE., Wheeldon M., Galk J.:
Investigation of the comminution process in pendular roller mills
In: International Journal of Mineral Processing 136 (2015), p. 26-31
ISSN: 0301-7516
DOI: 10.1016/j.minpro.2014.09.013

Bao H., Bihr T., Smith AS., Klupp Taylor R.:
Facile colloidal coating of polystyrene nanospheres with tunable gold dendritic patches
In: Nanoscale 6 (2014), p. 3954-3966
ISSN: 2040-3364
DOI: 10.1039/c3nr04016j
Blümel C., Ribeiro Parteli EJ., Schmidt J., Wirth KE., Peukert W., Pöschel T.:
Numerical study of the packing density of fine powders by means of the Discrete Element Method
85th Annual Meeting of the International Association of Applied Mathematics and Mechanics – GAMM 2014 (, 10. March 2014 - 14. March 2014)
Blümel C., Schmidt J., Dielesen A., Sachs M., Winzer B., Peukert W., Wirth KE.:
Dry particle coating of polymer particles for tailor-made product properties
29th International Conference of the Polymer Processing Society, PPS 2013 (Nuremberg, 15. July 2013 - 19. July 2013)
In: AIP Conference Proceedings 1593 2014
DOI: 10.1063/1.4873774
Diba M., Garcia-Gallastegui A., Klupp Taylor R., Pishbin F., Ryan MP., Shaffer MSP., Boccaccini AR.:
Quantitative evaluation of electrophoretic deposition kinetics of graphene oxide
In: Carbon 67 (2014), p. 656-661
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2013.10.041
Distaso M., Mackovic M., Spiecker E., Peukert W.:
Formation and Dissolution of Twin ZnO Nanostructures Promoted by Water and Control over Their Emitting Properties
In: Chemistry - A European Journal 20 (2014), p. 8199--8209
ISSN: 0947-6539
DOI: 10.1002/chem.201400100
Dörfler A., Detsch R., Romeis S., Schmidt J., Eisermann C., Peukert W., Boccaccini AR.:
Biocompatibility of submicron Bioglass® powders obtained by a top-down approach
In: Journal of Biomedical Materials Research Part B: Applied Biomaterials 102 (2014), p. 952-961
ISSN: 1552-4973
DOI: 10.1002/jbm.b.33076
Eisermann C., Damm C., Winzer B., Peukert W.:
Stabilization of carbon black particles with Cetyltrimethylammoniumbromide in aqueous media
In: Powder Technology 253 (2014), p. 338-346
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2013.11.051
Engelhardt K., Peukert W., Braunschweig B.:
Vibrational sum-frequency generation at protein modified air–water interfaces: Effects of molecular structure and surface charging
In: Current Opinion in Colloid & Interface Science 19 (2014), p. 207--215
ISSN: 1359-0294
DOI: 10.1016/j.cocis.2014.03.008
Engelhardt K., Weichsel U., Kraft E., Segets D., Peukert W., Braunschweig B.:
Mixed Layers of β-Lactoglobulin and SDS at Air-Water Interfaces with Tunable Intermolecular Interactions
In: Journal of Physical Chemistry B 118 (2014), p. 4098-4105
ISSN: 1520-6106
DOI: 10.1021/jp501541q
Funk C., Winzer B., Peukert W.:
Correlation between shape, evaporation mode and mobility of small water droplets on nanorough fibres
In: Journal of Colloid and Interface Science 417 (2014), p. 171-179
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2013.11.005
Gheisi A., Neygandhi C., Sternig A., Carrasco E., Marbach H., Thomele D., Diwald O.:
O2 adsorption dependent photoluminescence emission from metal oxide nanoparticles
In: Physical Chemistry Chemical Physics 16 (2014), p. 23922-23929
ISSN: 1463-9076
DOI: 10.1039/c4cp03080j
Gheisi A., Sternig A., Rangus M., Redhammer G., Hartmann M., Diwald O.:
Spontaneous Growth of Magnesium Hydroxide Fibers at Ambient Conditions
In: Crystal Growth & Design 14 (2014), p. 4236-4239
ISSN: 1528-7483
DOI: 10.1021/cg500538d
Gröschel M., Peukert W., Leugering G.:
Modeling, analysis and optimization of particle growth, nucleation and ripening by the way of nonlinear hyperbolic integro-partial differential equations
In: Günter Leugering; Peter Benner; Sebastian Engell; Andreas Griewank; Helmut Harbrecht; Michael Hinze; Rolf Rannacher; Stefan Ulbrich (ed.): Trends in PDE Constrained Optimization, Springer, 2014, p. 471-486 (International Series of Numerical Mathematics, Vol.165)
DOI: 10.1007/978-3-319-05083-6_30
Hankel R., Günther A., Wirth KE., Leipertz A., Bräuer A.:
Liquid phase temperature determination in dense water sprays using linear Raman scattering
In: Optics Express 22 (2014), p. 7962-7971
ISSN: 1094-4087
DOI: 10.1364/OE.22.007962
URL: https://www.osapublishing.org/oe/abstract.cfm?uri=oe-22-7-7962
Hartig MAJ., Jacobsen N., Peukert W.:
Multi-component and multi-phase population balance model: The case of Georgeite formation as methanol catalyst precursor phase
In: Chemical Engineering Science 109 (2014), p. 158--170
ISSN: 0009-2509
DOI: 10.1016/j.ces.2014.01.026
Hartmann J., Blümel C., Ernst S., Fiegl T., Wirth KE., Körner C.:
Aluminum integral foam castings with microcellular cores by nano-functionalization
In: Journal of Materials Science 49 (2014), p. 79-87
ISSN: 0022-2461
DOI: 10.1007/s10853-013-7668-z
Hensler T., Zhang Y., Mleczko L., Assmann J., Bellinghausen R., Schwieger W., Wirth KE.:
High-density risers as reactor system for benzene synthesis by non-oxidative dehydroaromatization of methane - fluid-dynamic investigations
11th International Conference on Fluidized Bed Technology, CFB 2014 (Beijing)
URL: https://www.scopus.com/inward/record.url?partnerID=HzOxMe3b&scp=84902668468&origin=inward
Hoppe A., Jokic B., Janackovic D., Fey T., Greil P., Romeis S., Schmidt J., Peukert W., Lao J., Jallot E., Boccaccini AR.:
Cobalt-Releasing 1393 Bioactive Glass-Derived Scaffolds for Bone Tissue Engineering Applications
In: ACS Applied Materials and Interfaces 6 (2014), p. 2865-2877
ISSN: 1944-8244
DOI: 10.1021/am405354y
Hosseinpour S., Göthelid M., Leygraf C., Johnson C.:
Self-assembled monolayers as inhibitors for the atmospheric corrosion of copper induced by formic acid: A comparison between hexanethiol and hexaneselenol
In: Journal of The Electrochemical Society 161 (2014)
ISSN: 0013-4651
DOI: 10.1149/2.056401jes
Kilian D., Engel S., Borsdorf B., Gao Y., Kögler A., Kobler S., Seeger T., Will S., Leipertz A., Peukert W.:
Spatially resolved flame zone classification of a flame spray nanoparticle synthesis process by combining different optical techniques
In: Journal of Aerosol Science 69 (2014), p. 82--97
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2013.12.002
Kilian D., Polster S., Vogeler I., Frey L., Jank M., Peukert W.:
Pulsed direct flame deposition and thermal annealing of transparent amorphous indium zinc oxide films as active layers in field effect transistors
In: ACS Applied Materials and Interfaces 6 (2014), p. 12245-12251
ISSN: 1944-8244
DOI: 10.1021/am501837u
Klaumünzer M., Distaso M., Hübner J., Mackovic M., Spiecker E., Kryschi C., Peukert W.:
ZnO superstructures via oriented aggregation initiated in a block copolymer melt
In: Crystengcomm 16 (2014), p. 1502-1513
ISSN: 1466-8033
DOI: 10.1039/c3ce41868e
Klaumünzer M., Kahnt A., Burger A., Mackovic M., Muenzel C., Srikantharajah R., Spiecker E., Hirsch A., Peukert W., Guldi DM.:
Surface functionalization and electronic interactions of ZnO nanorods with a porphyrin derivative
In: ACS Applied Materials and Interfaces 6 (2014), p. 6724-6730
ISSN: 1944-8244
DOI: 10.1021/am5004552
Konnerth CG., Damm C., Schmidt J., Peukert W.:
Mechanical activation of trans-stilbene during wet grinding
In: Advanced Powder Technology 25 (2014), p. 1808-1816
ISSN: 0921-8831
DOI: 10.1016/j.apt.2014.07.011
Mehringer C., Wagner R., Jakuttis T., Butz B., Spiecker E., Peukert W.:
Gas phase synthesis of anisotropic silicon germanium hybrid nanoparticles
In: Journal of Aerosol Science 67 (2014), p. 119--130
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2013.10.005
Meltzer C., Paul J., Dietrich H., Jäger C., Clark T., Zahn D., Braunschweig B., Peukert W.:
Indentation and Self-Healing Mechanisms of a Self-Assembled Monolayer-A Combined Experimental and Modeling Study
In: Journal of the American Chemical Society 136 (2014), p. 10718--10727
ISSN: 1520-5126
DOI: 10.1021/ja5048076
Münsterjohann B., Engel S., Kilian D., Will S., Peukert W.:
Classification of Different Zones in a Flame Spray Pyrolysis Process
International Workshop Nucleation and Early Stages of Particle Formation (Erlangen, 5. June 2014 - 6. June 2014)
Münsterjohann B., Engel S., Stanzel M., Kilian D., Herre P., Peukert W., Will S.:
Optical Analysis and Material Characterization of Nanoparticulate Oxides Synthesized via Flame Spray Pyrolysis
2014 MRS (Materials Research Society) Fall Meeting and Exhibit (Boston, 30. November 2014 - 5. December 2014)
Naseri S., Diba M., Golkar S., Boccaccini AR., Klupp Taylor R.:
Fabrication of gold-nanoshell/polycaprolactonecomposite films with high electrical conductivity
In: Materials Letters 130 (2014), p. 164-167
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2014.05.067
Paul J., Romeis S., Tomas J., Peukert W.:
A review of models for single particle compression and their application to silica microspheres
In: Advanced Powder Technology 25 (2014), p. 136-153
ISSN: 0921-8831
DOI: 10.1016/j.apt.2013.09.009
Peukert W., Braunschweig B., Sauerbeck C.:
Surface Charging and Interfacial Water Structure of Amphoteric Colloidal Particles
In: Journal of Physical Chemistry C 118 (2014), p. 10033--10042
ISSN: 1932-7447
DOI: 10.1021/jp412295j
Qazi TH., Rai R., Boccaccini AR.:
Tissue engineering of electrically responsive tissues using polyaniline based polymers: A review
In: Biomaterials 35 (2014), p. 9068-9086
ISSN: 0142-9612
DOI: 10.1016/j.biomaterials.2014.07.020
Reinhold Lopez K., Bräuer A., Romann B., Popovska-Leipertz N., Leipertz A.:
Simultaneous in situ Raman monitoring of the solid and gas phases during the formation and growth of carbon nanotubes inside a cold wall CCVD reactor
In: Carbon 78 (2014), p. 164-180
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2014.06.064
URL: http://www.sciencedirect.com/science/article/pii/S0008622314006101
Ribeiro Parteli EJ., Schmidt J., Blümel C., Wirth KE., Peukert W., Pöschel T.:
Attractive particle interaction forces and packing density of fine glass powders
In: Scientific Reports 4 (2014), Article No.: 6227
ISSN: 2045-2322
DOI: 10.1038/srep06227
Romanov SG., Orlov S., Vogel N., Bley K., Landfester K., Weiss CK., Peschel U.:
Balancing ballistic and hopping light transport by purposive arraying of colloidal particles
Photonic Crystal Materials and Devices XI (Brussels)
DOI: 10.1117/12.2051220
Romeis S., Hoppe A., Eisermann C., Schneider N., Boccaccini AR., Schmidt J., Peukert W.:
Enhancing In Vitro Bioactivity of Melt-Derived 45S5 Bioglass® by Comminution in a Stirred Media Mill
In: Journal of the American Ceramic Society 97 (2014), p. 150-156
ISSN: 0002-7820
DOI: 10.1111/jace.12615
Romeis S., Paul J., Hanisch M., Marthala V., Hartmann M., Klupp Taylor R., Schmidt J., Peukert W.:
Correlation of Enhanced Strength and Internal Structure for Heat-Treated Submicron Stöber Silica Particles
In: Particle & Particle Systems Characterization 31 (2014), p. 664--674
ISSN: 0934-0866
DOI: 10.1002/ppsc.201300306
Sachs M., Hentschel O., Schmidt J., Karg M., Schmidt M., Wirth KE.:
Production of Al/Cu-Particles and their potential for processing by Laser Beam Melting (LBM)
In: Physics Procedia 56 (2014), p. 125-134
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2014.08.155
URL: http://www.sciencedirect.com/science/article/pii/S1875389214003009
Sachs M., Schmitt A., Schmidt J., Peukert W., Wirth KE.:
Functionalization of polymers using an atmospheric plasma jet in a fluidized bed reactor and the impact on SLM-Processes
29th International Conference of the Polymer Processing Society (Nürnberg, 15. July 2013 - 19. July 2013)
DOI: 10.1063/1.4873878
Sachs M., Schmitt A., Schmidt J., Peukert W., Wirth KE.:
Functionalization of polymers using an atmospheric plasma jet in a fluidized bed reactor and its impact on selective laser melting processes
11th International Conference on Fluidized Bed Technology, CFB 2014 (Beijing, 14. May 2014 - 17. May 2014)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84902675038&origin=inward
Sauerbeck C., Haderlein M., Schürer B., Braunschweig B., Peukert W., Klupp Taylor R.:
Shedding light on the growth of gold nanoshells
In: ACS nano 8 (2014), p. 3088-3096
ISSN: 1936-0851
DOI: 10.1021/nn500729r
Schmidt J., Sachs M., Blümel C., Winzer B., Toni F., Wirth KE., Peukert W.:
A novel process route for the production of spherical LBM polymer powders with small size and good flowability
In: Powder Technology 261 (2014), p. 78-86
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2014.04.003
Schäfer S., Srikantharajah R., Klaumünzer M., Lobaz V., Voigt M., Peukert W.:
Self-alignment of zinc oxide nanorods into a 3D-smectic phase
In: Thin Solid Films 562 (2014), p. 659--667
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2014.03.025
Siedl N., Koller D., Sternig A., Thomele D., Diwald O.:
Photoluminescence quenching in compressed MgO nanoparticle systems
In: Physical Chemistry Chemical Physics 16 (2014), p. 8339-8345
ISSN: 1463-9076
DOI: 10.1039/c3cp54582b
Silva Lourenco R., Bulut B., Roether J., Kaschta J., Schubert DW., Boccaccini AR.:
Sonochemical processing and characterization of composite materials based on soy protein and alginate containing micron-sized bioactive glass particles
In: Journal of Molecular Structure 1073 (2014), p. 87-96
ISSN: 0022-2860
DOI: 10.1016/j.molstruc.2014.05.047
Solodovnyk A., Hollmann A., Osvet A., Forberich K., Stern E., Batentschuk M., Klupp Taylor R., Brabec C.:
Luminescent down-shifting layers with Eu2+ and Eu3+ doped strontium compound particles for photovoltaics
Next Generation Technologies for Solar Energy Conversion V (San Diego, 19. August 2014 - 20. August 2014)
DOI: 10.1117/12.2061044
Strauß V., Margraf J., Dolle C., Butz B., Nacken T., Walter J., Bauer W., Peukert W., Spiecker E., Clark T., Guldi DM.:
Carbon Nanodots: Toward a Comprehensive Understanding of Their Photoluminescence
In: Journal of the American Chemical Society 136 (2014), p. 17308--17316
ISSN: 0002-7863
DOI: 10.1021/ja510183c
Tuzakli R., Vogel N., Romanova A., Romanov SG., Peschel U.:
Topology-dependent light transport in planar plasmonic-photonic architectures
European Conference on Lasers and Electro-Optics, CLEO 2015
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85019512968&origin=inward
Sunny S, Vogel N, Howell C, Vu TL, Aizenberg J:
Lubricant-Infused Nanoparticulate Coatings Assembled by Layer-by-Layer Deposition
In: Advanced Functional Materials 24 (2014), p. 6658-6667
ISSN: 1616-301X
DOI: 10.1002/adfm.201401289
Phillips KR, Vogel N, Hu YH, Kolle M, Perry CC, Aizenberg J:
Tunable Anisotropy in Inverse Opals and Emerging Optical Properties
In: Chemistry of Materials 26 (2014), p. 1622-1628
ISSN: 0897-4756
DOI: 10.1021/cm403812y
Koay N., Burgess I., Kay T., Nerger B., Miles-Rossouw M., Shirman T., Vu T., England G., Phillips K., Utech S., Vogel N., Kolle M., Aizenberg J.:
Hierarchical structural control of visual properties in self-assembled photonic-plasmonic pigments
In: Optics Express 22 (2014), p. 27750-27768
ISSN: 1094-4087
DOI: 10.1364/OE.22.027750
K. Bley, N. Sinatra, N. Vogel, K. Landfester and C.K. Weiss:
Switching light with light – Advanced functional colloidal monolayers
In: Nanoscale 6 (2014), p. 6879
ISSN: 2040-3364
N. Vogel, J. Ally, K. Bley, M. Kappl, K. Landfester and C. K. Weiss:
Direct visualization of the interfacial position of colloidal particles and their assemblies
In: Nanoscale 6 (2014), p. 6879
ISSN: 2040-3364
Phillips K., Vogel N., Burgess I., Perry C., Aizenberg J.:
Directional wetting in anisotropic inverse opals
In: Langmuir 30 (2014), p. 7615-7620
ISSN: 0743-7463
DOI: 10.1021/la5015253
Walter J., Löhr K., Karabudak E., Reis W., Mikhael J., Peukert W., Wohlleben W., Coelfen H.:
Multidimensional Analysis of Nanoparticles with Highly Disperse Properties Using Multiwavelength Analytical Ultracentrifugation
In: ACS nano 8 (2014), p. 8871--8886
ISSN: 1936-0851
DOI: 10.1021/nn503205k
Walter J., Nacken T., Damm C., Thajudeen T., Eigler S., Peukert W.:
Determination of the Lateral Dimension of Graphene Oxide Nanosheets Using Analytical Ultracentrifugation
In: Small 11 (2014), p. 814--825
ISSN: 1613-6829
DOI: 10.1002/smll.201401940

Ahmad R., Distaso M., Azimi SH., Brabec C., Peukert W.:
Facile synthesis and post-processing of eco-friendly, highly conductive copper zinc tin sulphide nanoparticles
In: Journal of Nanoparticle Research 15 (2013), p. 1886
ISSN: 1388-0764
DOI: 10.1007/s11051-013-1886-9
Azimi SH., Heumüller T., Gerl A., Matt G., Kubis P., Distaso M., Ahmad R., Akdas T., Richter M., Peukert W., Brabec C.:
Relation of Nanostructure and Recombination Dynamics in a Low-Temperature Solution-Processed CuInS2 Nanocrystalline Solar Cell
In: Advanced Energy Materials 3 (2013), p. 1589--1596
ISSN: 1614-6832
DOI: 10.1002/aenm.201300449
Baumann SO., Liu C., Elser MJ., Sternig A., Siedl N., Berger T., Diwald O.:
On the entangled growth of NaTaO3 cubes and Na2Ti3O7 wires in sodium hydroxide solution
In: Chemistry - A European Journal 19 (2013), p. 10235-10243
ISSN: 0947-6539
DOI: 10.1002/chem.201204281
Blümel C., Wirth KE.:
Dry particle coating for tailor-made product properties: Coating and decoating processes
Particle Technology Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future (San Francisco, 3. November 2013 - 8. November 2013)
In: PARTICLE TECHNOLOGY FORUM. 2013. CORE PROGRAMMING AREA AT THE 2013 AICHE ANNUAL MEETING: GLOBAL CHALLENGES FOR ENGINEERING A SUSTAINABLE FUTURE 2013
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84912125167&origin=inward
Braunschweig B., Mukherjee P., Kutz R., Rumpel A., Engelhardt K., Peukert W., Dlott D., Wieckowski A.:
Spectroscopy of Electrified Interfaces with Broadband Sum Frequency Generation: From Electrocatalysis to Protein Foams
In: Wieckowski A., Korzeniewski C., Braunschweig B. (ed.): Vibrational Spectroscopy at Electrified Interfaces, wiley, 2013, p. 120-150
ISBN: 9781118658871
DOI: 10.1002/9781118658871.ch4
Damm C., Peukert W., Körner J.:
Delamination of hexagonal boron nitride in a stirred media mill
In: Journal of Nanoparticle Research 15 (2013), Article No.: 1561
ISSN: 1388-0764
DOI: 10.1007/s11051-013-1561-1
Dürr S., Tietze R., Lyer S., Janko C., Schreiber E., Mann J., Turcu R., Gitter K., Odenbach S., Vasylyev S., Herrmann M., Peukert W., Alexiou C.:
Characterizations of drug carrying magnetic nanoparticles for tumor therapy: Biological outcome and first immunological aspects
In: Magnetohydrodynamics 49 (2013), p. 552-559
ISSN: 0024-998X
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84890253895&origin=inward
Engelhardt K., Peukert W., Braunschweig B.:
Protein adsorption at the electrified air-water interface: Effects on foam stability
Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future (San Francisco, CA, 3. November 2013 - 8. November 2013)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84911882831&origin=inward
Hoppe A., Meszaros R., Staehli C., Romeis S., Schmidt J., Peukert W., Marelli B., Nazhat SN., Wondraczek L., Lao J., Jallot E., Boccaccini AR.:
In vitro reactivity of Cu doped 45S5 Bioglass® derived scaffolds for bone tissue engineering
In: Journal of Materials Chemistry B 1 (2013), p. 5659-5674
ISSN: 2050-750X
DOI: 10.1039/c3tb21007c
Hosseinpour S.:
Nanoplasmonic Sensing for Monitoring the Initial Stages of Atmospheric Corrosion of Cu Nanodisks and Thin Films
In: Journal of The Electrochemical Society (2013)
ISSN: 0013-4651
DOI: 10.1149/2.051310jes
Hosseinpour S., Johnson C., Leygraf C.:
Alkanethiols as inhibitors for the atmospheric corrosion of copper induced by formic acid: Effect of chain length
In: Journal of The Electrochemical Society 160 (2013)
ISSN: 0013-4651
DOI: 10.1149/2.104306jes
Markus Schwind, Saman Hosseinpour, C Magnus Johnson, Christoph Langhammer, Igor Zorić, Christofer Leygraf, Bengt Kasemo:
Combined in situ quartz crystal microbalance with dissipation monitoring, indirect nanoplasmonic sensing, and vibrational sum frequency spectroscopic monitoring of alkanethiol-protected copper corrosion
In: Langmuir (2013)
ISSN: 0743-7463
DOI: 10.1021/la4009224
Hosseinpour S.:
Radiation induced corrosion of copper for spent nuclear fuel storage
In: Radiation Physics and Chemistry (2013)
ISSN: 0969-806X
DOI: 10.1016/j.radphyschem.2013.06.033
Kifah S., Mamone P., Doerr G., Bauer T., Brodyanski A., Wagner C., Kopnarski M., Klupp Taylor R., Demeshko S., Meyer F., Schünemann V., Ernst S., Goßen L., Thiel WR.:
Facile synthesis of monodisperse maghemite and ferrite nanocrystals from metal powder and octanoic acid
In: Chemistry of Materials 25 (2013), p. 1430-1435
ISSN: 0897-4756
DOI: 10.1021/cm303344z
Klaumünzer M., Distaso M., Hübner J., Kryschi C., Peukert W., Wolfrum C.:
Synthesis of stable and surface functionalized nanoparticles in an amphiphilic block copolymer melt
Nanotechnology 2013: Advanced Materials, CNTs, Particles, Films and Composites - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Washington, DC, 12. May 2013 - 16. May 2013)
In: Technical Proceedings of the 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 2013
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84881095303&origin=inward
Klaumünzer M., Mackovic M., Ferstl P., Voigt M., Spiecker E., Meyer B., Peukert W.:
Precipitation of In(OH)3 and InOOH nanocrystals for the use in nanoelectronics: Phase transition behavior and oriented aggregation
Nanotechnology 2013: Advanced Materials, CNTs, Particles, Films and Composites - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Washington, DC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84881091856&origin=inward
Klaumünzer M., Münzel C., Burger A., Mackovic M., Voigt M., Spiecker E., Hirsch A., Peukert W.:
An effective dialysis method for surface funtionalization of nanoparticles in liquid phase - Sample: Porphyrine derivatives @ ZnO-Nanorods
Nanotechnology 2013: Advanced Materials, CNTs, Particles, Films and Composites - 2013 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2013 (Washington, DC)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84881092806&origin=inward
Klaumünzer M., Weichsel U., Mackovic M., Spiecker E., Peukert W., Kryschi C., Spiecker E., Mackovic M.:
Transmission electron microscopy and time resolved optical spectroscopy study of the electronic and structural interactions of ZnO nanorods with bovine serum albumin
In: Journal of Physical Chemistry B 117 (2013), p. 9683-9689
ISSN: 1520-6106
DOI: 10.1021/jp405181u
Klupp Taylor R., Bao H., Sadafi FZ.:
Patchy particles made easy: Developing general colloidal approaches to produce anisotropic building blocks for novel functional materials
Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84911945180&origin=inward
Klupp Taylor R., Hanisch M., Spies I.:
Investigation of interfacial processes leading to anisotropic silver nanostructures on 2D monolayers of silica spheres
Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future (San Francisco, 3. November 2013 - 8. November 2013)
In: Investigation of Interfacial Processes Leading to Anisotropic Silver Nanostructures On 2D Monolayers of Silica Spheres 2013
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84911911530&origin=inward
Peukert W., Braunschweig B., Sauerbeck C.:
Angle-resolved second-harmonic light scattering of colloidal interfaces
Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future (San Francisco, 3. November 2013 - 8. November 2013)
In: Proceedings of a meeting held 3-8 November 2013, San Francisco, California, USA. Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future 2013
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84911912036&origin=inward
Peukert W., Engelhardt K., Konnerth CG., Braunschweig B., Lexis M., Gochev G., Miller R., Willenbacher N.:
pH effects on the molecular structure of β-lactoglobulin modified air-water interfaces and its impact on foam rheology
In: Langmuir 29 (2013), p. 11646-11655
ISSN: 0743-7463
DOI: 10.1021/la402729g
Peukert W., Romanov S., Belotitskii V., Korovin A., Lobazh V.:
Polarized light transmission in distorted 2-dimensional slab colloidal plasmonic-photonic crystals
2013 7th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics, METAMATERIALS 2013 (Bordeaux, 16. September 2013 - 21. September 2013)
In: 7th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics Metamaterials 2013 2013
DOI: 10.1109/MetaMaterials.2013.6809029
Peukert W., Tietze R., Lyer S., Dürr S., Struffert T., Engelhorn T., Schwarz M., Eckert E., Göen T., Vasylyev S., Trahms L., Dörfler A., Wiehorst F., Alexiou C.:
Efficient drug-delivery using magnetic nanoparticles--biodistribution and therapeutic effects in tumour bearing rabbits.
In: Nanomedicine : nanotechnology, biology, and medicine 9 (2013), p. 961-971
ISSN: 1549-9642
DOI: 10.1016/j.nano.2013.05.001
Sauerbeck C., Schürer B., Haderlein M., Braunschweig B., Peukert W., Klupp Taylor R.:
Growth of gold nanoshells on colloidal silica characterized by in situ second-harmonic generation
Engineering Sciences and Fundamentals 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future (San Francisco, 3. November 2013 - 8. November 2013)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84911932499∨igin=inward
Schmidt J., Damm C., Romeis S., Peukert W.:
Formation of nanoemulsions in stirred media mills
In: Chemical Engineering Science 102 (2013), p. 300-308
ISSN: 0009-2509
DOI: 10.1016/j.ces.2013.08.018
Schroeder J., Günther A., Wirth KE., Schuchmann HP., Gaukel V.:
Effervescent atomization of polyvinylpyrrolidone solutions: Influence of liquid properties and atomizer geometry on liquid breakup and spray characteristics
In: Atomization and Sprays 23 (2013), p. 1-23
ISSN: 1044-5110
DOI: 10.1615/AtomizSpr.2013005849
Segets D., Komada S., Butz B., Spiecker E., Mori Y., Peukert W.:
Quantitative evaluation of size selective precipitation of Mn-doped ZnS quantum dots by size distributions calculated from UV/Vis absorbance spectra
In: Journal of Nanoparticle Research 15 (2013), p. 1486
ISSN: 1388-0764
DOI: 10.1007/s11051-013-1486-8
Siedl N., Baumann SO., Diwald O.:
Metal oxide particle networks from powder mixtures: Generation of functional heterojunctions via surface charge induced heteroaggregation
246th National Meeting of the American-Chemical-Society (ACS) (Indianapolis, 8. September 2013 - 12. September 2013)
In: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, Volume: 246 2013
Siedl N., Gügel P., Diwald O.:
First combined electron paramagnetic resonance and FT-IR spectroscopic evidence for reversible O2 adsorption on In2O3-x nanoparticles
In: Journal of Physical Chemistry C 117 (2013), p. 20722-20729
ISSN: 1932-7447
DOI: 10.1021/jp4069834
Siedl N., Gügel P., Diwald O.:
Synthesis and Aggregation of In2O3 Nanoparticles: Impact of Process Parameters on Stoichiometry Changes and Optical Properties
In: Langmuir 29 (2013), p. 6077-6083
ISSN: 0743-7463
DOI: 10.1021/la400750d
Sternig A., Diwald O., Gross S., Sushko PV.:
Surface decoration of MgO nanocubes with sulfur oxides: Experiment and theory
In: Journal of Physical Chemistry C 117 (2013), p. 7727-7735
ISSN: 1932-7447
DOI: 10.1021/jp401432j
Vasylyev S., Damm C., Segets D., Hanisch M., Taccardi N., Wasserscheid P., Peukert W.:
Synthesis of silver nanoparticles in melts of amphiphilic polyesters
In: Nanotechnology 24 (2013), p. 115604
ISSN: 1361-6528
DOI: 10.1088/0957-4484/24/11/115604
Staudt T., MacHado T., Vogel N., Weiss C., Araujo P., Sayer C., Landfester K.:
Magnetic polymer/nickel hybrid nanoparticles via miniemulsion polymerization
In: Macromolecular Chemistry and Physics 214 (2013), p. 2213-2222
ISSN: 1022-1352
DOI: 10.1002/macp.201300329
Vogel N., Belisle R., Hatton B., Wong T., Aizenberg J.:
Transparency and damage tolerance of patternable omniphobic lubricated surfaces based on inverse colloidal monolayers
In: Nature Communications 4 (2013), Article No.: 2176
ISSN: 2041-1723
DOI: 10.1038/ncomms3176
Vogel N, Utech S, Kolle M, Weitz DA, Aizenberg J:
Crystallinity and internal structure of photonic balls prepared by colloidal crystallization in the confinement of an emulsion droplet
245 (2013)
ISSN: 0065-7727
(Conference report)
Wirth KE., Günther A.:
Evaporation phenomena in superheated atomization and its impact on the generated spray
In: International Journal of Heat and Mass Transfer 64 (2013), p. 952-965
ISSN: 0017-9310
DOI: 10.1016/j.ijheatmasstransfer.2013.05.034

Armstrong P., Peukert W.:
Size effects in the elastic deformation behavior of metallic nanoparticles
In: Journal of Nanoparticle Research 14 (2012), Article No.: ARTN 1288
ISSN: 1388-0764
DOI: 10.1007/s11051-012-1288-4
Bao H., Butz B., Zhou Z., Spiecker E., Hartmann M., Klupp Taylor R.:
Silver-Assisted Colloidal Synthesis of Stable, Plasmon Resonant Gold Patches on Silica Nanospheres
In: Langmuir 28 (2012), p. 8971-8978
ISSN: 0743-7463
DOI: 10.1021/la204762z
URL: http://pubs.acs.org/doi/abs/10.1021/la204762z
Bao H., Butz B., Zhou Z., Spiecker E., Hartmann M., Klupp Taylor R.:
Silver-assisted colloidal synthesis of gold patchy particles with tunable patchiness
In: Langmuir 28 (2012), p. 8971-8978
ISSN: 0743-7463
DOI: 10.1021/la204762z
Braunschweig B., Engelhardt K., Rumpel A., Walter J., Peukert W.:
Protein adsorption at the electrified air-water interface: Implications on foam stability
In: ACS National Meeting Book of Abstracts 244 (2012), Article No.: 562-COLL
ISSN: 0065-7727
(anderer)
Distaso M., Mackovic M., Spiecker E., Peukert W.:
Early Stages of Oriented Attachment: Formation of Twin ZnO Nanorods under Microwave Irradiation
In: Chemistry - A European Journal 18 (2012), p. 13265--13268
ISSN: 0947-6539
DOI: 10.1002/chem.201201646
Distaso M., Segets D., Wernet R., Peukert W., Klupp Taylor R.:
Tuning the size and the optical properties of ZnO mesocrystals synthesized under solvothermal conditions
In: Nanoscale 4 (2012), p. 864-873
ISSN: 2040-3364
DOI: 10.1039/c1nr11226k
Eisermann C., Mallembakam MR., Damm C., Peukert W., Breitung-Faes S., Kwade A.:
Polymeric stabilization of fused corundum during nanogrinding in stirred media mills
In: Powder Technology 217 (2012), p. 315-324
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2011.10.043
Elser MJ., Diwald O.:
Facilitated Lattice Oxygen Depletion in Consolidated TiO2 Nanocrystal Ensembles: A Quantitative Spectroscopic O2 Adsorption Study
In: Journal of Physical Chemistry C 116 (2012), p. 2896-2903
ISSN: 1932-7447
DOI: 10.1021/jp208707p
Engelhardt K., Rumpel A., Walter J., Dombrowski J., Kulozik U., Braunschweig B., Peukert W.:
Protein adsorption at the electrified air-water interface: Implications on foam stability
In: Langmuir 28 (2012), p. 7780-7787
ISSN: 0743-7463
DOI: 10.1021/la301368v
Förster H., Wolfrum C., Peukert W.:
Experimental study of metal nanoparticle synthesis by an arc evaporation/condensation process
In: Journal of Nanoparticle Research 14 (2012), Article No.: ARTN 926
ISSN: 1388-0764
DOI: 10.1007/s11051-012-0926-1
Gröschel M., Koermer R., Walther M., Leugering G., Peukert W.:
Process control strategies for the gas phase synthesis of silicon nanoparticles
In: Chemical Engineering Science 73 (2012), p. 181--194
ISSN: 0009-2509
DOI: 10.1016/j.ces.2012.01.035
Halik M., Peukert W., Braunschweig B., Klaumünzer M., Hirschmann J., Faber H.:
Impact of oxygen plasma treatment on the device performance of zinc oxide nanoparticle based thin-film transistors
In: ACS Applied Materials and Interfaces 4 (2012), p. 1693–1696
ISSN: 1944-8244
DOI: 10.1021/am2018223
URL: http://pubs.acs.org/doi/full/10.1021/am2018223
Hanisch M., Mackovic M., Taccardi N., Spiecker E., Klupp Taylor R.:
Synthesis of silver nanoparticle necklaces without explicit addition of reducing or templating agents
In: Chemical Communications 48 (2012), p. 4287-4289
ISSN: 1359-7345
DOI: 10.1039/c2cc30671a
Hosseinpour S., Schwind M., Kasemo B., Leygraf C., Johnson C.:
Integration of quartz crystal microbalance with vibrational sum frequency spectroscopy-quantification of the initial oxidation of alkanethiol-covered copper
In: Journal of Physical Chemistry C 116 (2012), p. 24549-24557
ISSN: 1932-7447
DOI: 10.1021/jp3066426
Åsa Björkbacka, Saman Hosseinpour, Christopher Leygraf, Mats Jonsson:
Radiation Induced Corrosion of Copper in Anoxic Aqueous Solution
In: Electrochemical and Solid State Letters (2012)
ISSN: 1099-0062
DOI: 10.1149/2.022205esl
Björkbacka A., Hosseinpour S., Leygraf C., Jonsson M.:
Erratum: Radiation induced corrosion of copper in anoxic aqueous solution(Electrochemical and Solid-State Letters (2012) 15 (C5))
In: Electrochemical and Solid State Letters 15 (2012)
ISSN: 1099-0062
DOI: 10.1149/2.016206esl
Kirchhof M., Förster H., Schmid HJ., Peukert W.:
Sintering kinetics and mechanism of vitreous nanoparticles
In: Journal of Aerosol Science 45 (2012), p. 26-39
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2011.10.006
Klaumünzer M., Mackovic M., Ferstl P., Voigt M., Spiecker E., Meyer B., Peukert W.:
Phase Transition Behavior and Oriented Aggregation During Precipitation of In(OH)3 and InOOH Nanocrystals
In: Journal of Physical Chemistry C 116 (2012), p. 24529--24537
ISSN: 1932-7447
DOI: 10.1021/jp305858n
Koermer R., Butz B., Spiecker E., Peukert W.:
Crystal Shape Engineering of Silicon Nanoparticles in a Thermal Aerosol Reactor
In: Crystal Growth & Design 12 (2012), p. 1330--1336
ISSN: 1528-7483
DOI: 10.1021/cg201394y
Lobaz V., Klupp Taylor R., Peukert W.:
Highly magnetizable superparamagnetic colloidal aggregates with narrowed size distribution from ferrofluid emulsion
In: Journal of Colloid and Interface Science 374 (2012), p. 102-110
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2012.01.057
Lux SF., Placke T., Engelhardt C., Nowak S., Bieker P., Wirth KE., Passerini S., Winter M., Meyer HW.:
Enhanced Electrochemical Performance of Graphite Anodes for Lithium-Ion Batteries by Dry Coating with Hydrophobic Fumed Silica
In: Journal of The Electrochemical Society 159 (2012), p. A1849-A1855
ISSN: 0013-4651
DOI: 10.1149/2.070211jes
Mahajeri M., Schneider A., Baum M., Rechtenwald T., Voigt M., Schmidt M., Peukert W.:
Production of dispersions with small particle size from commercial indium tin oxide powder for the deposition of highly conductive and transparent films
In: Thin Solid Films 520 (2012), p. 5741-5745
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2012.03.121
Maksimenko I., Kilian D., Mehringer C., Voigt M., Peukert W., Wellmann P.:
Application of Printable ITO/PEDOT Nanocomposites as Transparent Electrodes in Optoelectronic Devices
In: Conference on Lasers and Electro-Optics (2012), Article No.: CF3J.2.
ISSN: 2160-9020
DOI: 10.1364/CLEO_SI.2012.CF3J.2
Ozpinar GA., Beierlein F., Peukert W., Zahn D., Clark T.:
A test of improved force field parameters for urea: molecular-dynamics simulations of urea crystals
In: Journal of Molecular Modeling 18 (2012), p. 3455--3466
ISSN: 0948-5023
DOI: 10.1007/s00894-011-1336-5
Peschka D., Schmidt J., Wagner B., Bänsch E., Münch A., Peukert W., Prignitz R.:
Conductivity in nonpolar media: Experimental and numerical studies on sodium AOT-hexadecane, lecithin-hexadecane and aluminum(III)-3,5-diisopropyl salicylate-hexadecane systems
In: Journal of Colloid and Interface Science 386 (2012), p. 240-251
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2012.07.051
Peukert W., Damm C., Schäfer K., Möller M., Gries T., Wang H., Pich A., Wilms C., Seide G.:
Novel luminescent composite polymer fibers for warning and security systems
In: Technische Textilien 55 (2012), p. 8-12
ISSN: 0323-3243
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84864446820&origin=inward
Peukert W., Engel S., Gao Y., Kögler A., Kilian D., Seeger T., Leipertz A.:
Effect of particle presence on gas phase temperature in the flame spray pyrolysis
Nanotechnology 2012: Advanced Materials, CNTs, Particles, Films and Composites - 2012 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2012 (Santa Clara, CA, 18. June 2012 - 21. June 2012)
In: NSTI (ed.): Nanotechnology 2012: Advanced Materials, CNTs, Particles, Films and composites (Volume 1) 2012
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84865021972&origin=inward
Peukert W., Engel S., Kögler A., Gao Y., Kilian D., Voigt M., Seeger T., Leipertz A.:
Gas phase temperature measurements in the liquid and particle regime of a flame spray pyrolysis process using O2-based pure rotational coherent anti-Stokes Raman scattering
In: Applied Optics 51 (2012), p. 6063
ISSN: 2155-3165
DOI: 10.1364/AO.51.006063
Peukert W., Gao Y., Kögler A., Kilian D., Seeger T., Leipertz A., Engel S.:
Characterization of gas phase temperatures in dependence of particle presence in the flame spray pyrolysis process
CLEO: Applications and Technology, CLEO_AT 2012 (San Jose, CA, 6. May 2012 - 11. May 2012)
DOI: 10.1364/CLEO_AT.2012.JW2A.106
Peukert W., Gebauer J., Malissek M., Simon S., Knauer S., Maskos M., Stauber R., Treuel L.:
Impact of the nanoparticle-protein corona on colloidal stability and protein structure
In: Langmuir 28 (2012), p. 9673-9679
ISSN: 0743-7463
DOI: 10.1021/la301104a
Peukert W., Körmer R., Menz W., Shekar S., Brownbridge G., Mosbach S., Kraft M.:
Synthesis of silicon nanoparticles with a narrow size distribution: A theoretical study
In: Journal of Aerosol Science 44 (2012), p. 46--61
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2011.10.005
Peukert W., Seeger T., Engel S., Kögler A., Gao Y., Kilian D., Voigt M., Leipertz A.:
Gas phase temperature measurements in a flame spray pyrolysis process by O2 pure rotational CARS
Laser Applications to Chemical, Security and Environmental Analysis, LACSEA 2012 (San Diego, CA, 29. January 2012 - 1. February 2012)
In: OSA Publishing (ed.): Laser Applications to Chemical, Security and Environmental Analysis 2012, San Diego CF: 2012
DOI: 10.1364/LACSEA.2012.LW3B.1
Peukert W., Wunderlich S., Zhuromskyy O., Schürer B., Haderlein M., Sauerbeck C., Peschel U.:
Second Harmonic Generation from metallic and dielectric spherical nanoparticles
2012 Conference on Lasers and Electro-Optics, CLEO 2012 (San Jose, CA, 6. May 2012 - 11. May 2012)
In: 2012 Conference on Lasers and Electro-Optics (CLEO) 2012
DOI: 10.1364/QELS.2012.QTu1F.4
Reinhold Lopez K., Bräuer A., Schmitt A., Popovska N., Leipertz A.:
Flow field characterization in a vertically oriented cold wall CCVD reactor by particle image velocimetry
In: Chemical Engineering Journal 184 (2012), p. 315-325
ISSN: 1385-8947
Romanov SG., Vogel N., Bley K., Landfester K., Weiss CK., Orlov S., Korovin AV., Chuiko GP., Regensburger A., Romanova A., Kriesch A., Peschel U.:
Probing guided modes in a monolayer colloidal crystal on a flat metal film
In: Physical Review B 86 (2012), Article No.: 195145
ISSN: 0163-1829
DOI: 10.1103/PhysRevB.86.195145
Romeis S., Paul J., Ziener M., Peukert W.:
A novel apparatus for in situ compression of submicron structures and particles in a high resolution SEM
In: Review of Scientific Instruments 83 (2012), p. 095105
ISSN: 0034-6748
DOI: 10.1063/1.4749256
Rumpel A., Novak M., Walter J., Braunschweig B., Halik M., Peukert W.:
Tuning the molecular order of C-60 functionalized phosphonic acids
In: ACS National Meeting Book of Abstracts 244 (2012)
ISSN: 0065-7727
(anderer)
Sauerbeck C., Schürer B., Braunschweig B., Peukert W.:
Nonlinear spectroscopy meets particle interfaces: Revealing the interfacial structure of colloids
244 (2012), Article No.: 396-COLL
ISSN: 0065-7727
(anderer)
Schmidt J., Plata Acevedo MA., Tröger S., Peukert W.:
Production of polymer particles below 5 μm by wet grinding
In: Powder Technology 228 (2012), p. 84-90
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2012.04.064
Schäfer K., Wang H., Pich A., Mol̈ler M., Damm C., Peukert W., Wilms C., Seide G., Gries T.:
Novel luminescent composite polymer fibers for warning and security systems
In: Chemical Fibers International 62 (2012), p. 130-132
ISSN: 1434-3584
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84867282822&origin=inward
Segets D., Hartig MAJ., Gradl J., Peukert W.:
A population balance model of quantum dot formation: Oriented growth and ripening of ZnO
In: Chemical Engineering Science (2012)
ISSN: 0009-2509
DOI: 10.1016/j.ces.2011.04.043
Segets D., Lukas M., Klupp Taylor R., Scheele M., Zheng H., Alivisatos P., Peukert W.:
Determination of the quantum dot band gap dependence on particle size from optical absorbance and transmission electron microscopy measurements
In: Acs Nano 6 (2012), p. 9021-9032
ISSN: 1936-0851
DOI: 10.1021/nn303130d
Siedl N., Baumann SO., Elser MJ., Diwald O.:
Particle networks from powder mixtures: Generation of TiO2-SnO2 heterojunctions via surface charge-induced heteroaggregation
In: Journal of Physical Chemistry C 116 (2012), p. 22967-22973
ISSN: 1932-7447
DOI: 10.1021/jp307737s
Sternig A., Koller D., Siedl N., Diwald O., Mckenna K.:
Exciton Formation at Solid-Solid Interfaces: a systematic experimental and ab initio Study on compressed MgO Nanopowders
In: Journal of Physical Chemistry C (2012), Article No.: 120404111326000
ISSN: 1932-7447
DOI: 10.1021/jp3015222
Sternig A., Stankic S., Mueller M., Siedl N., Diwald O.:
Surface exciton separation in photoexcited MgO nanocube powders
In: Nanoscale 4 (2012), p. 7494-7500
ISSN: 2040-3364
DOI: 10.1039/c2nr31844j
Vieweg B., Butz B., Peukert W., Klupp Taylor R., Spiecker E.:
TEM preparation method for site- and orientation-specific sectioning of individual anisotropic nanoparticles based on shadow-FIB geometry
In: Ultramicroscopy 113 (2012), p. 165-170
ISSN: 0304-3991
DOI: 10.1016/j.ultramic.2011.11.015
Vittadini A., Schirmer M., Walz MM., Vollnhals F., Lukasczyk T., Steinrück HP., Marbach H., Riss A., Elser MJ., Schürer B., Diwald O.:
Defects in oxygen-depleted titanate nanostructures
In: Langmuir 28 (2012), p. 7851-7858
ISSN: 0743-7463
DOI: 10.1021/la301129v
Vogel N, Zieleniecki J, Koper I:
As flat as it gets: ultrasmooth surfaces from template-stripping procedures
In: Nanoscale 4 (2012), p. 3820-3832
ISSN: 2040-3364
DOI: 10.1039/c2nr30434a
Manzke A, Plettl A, Wiedwald U, Han LY, Ziemann P, Schreiber E, Ziener U, Vogel N, Weiss CK, Landfester K, Fauth K, Biskupek J, Kaiser U:
Formation of Highly Ordered Alloy Nanoparticles Based on Precursor-Filled Latex Spheres
In: Chemistry of Materials 24 (2012), p. 1048-1054
ISSN: 0897-4756
DOI: 10.1021/cm203241p
Romanov S., Orlov S., Korovin A., Zhuromskyy O., Vogel N., Landfester K., Weiss C., Peschel U.:
Interplay of Mie and Bragg resonances in partly ordered monolayers of colloidal spheres
Photonic Crystal Materials and Devices X (Brussels)
DOI: 10.1117/12.923433
Duewel M, Vogel N, Weiss CK, Landfester K, Spiess HW, Munnemann K:
Online Monitoring of Styrene Polymerization in Miniemulsion by Hyperpolarized (129)Xenon NMR Spectroscopy
In: Macromolecules 45 (2012), p. 1839-1846
ISSN: 0024-9297
DOI: 10.1021/ma202605n
Vogel N, Fernandez-Lopez C, Perez-Juste J, Liz-Marzan LM, Landfester K, Weiss CK:
Ordered Arrays of Gold Nanostructures from Interfacially Assembled Au@PNIPAM Hybrid Nanoparticles
In: Langmuir 28 (2012), p. 8985-8993
ISSN: 0743-7463
DOI: 10.1021/la2051299
Vogel N., Weiss C., Landfester K.:
From soft to hard: The generation of functional and complex colloidal monolayers for nanolithography
In: Soft Matter 8 (2012), p. 4044-4061
ISSN: 1744-683X
DOI: 10.1039/c1sm06650a
Wang L., Dehe D., Philippi T., Seifert A., Ernst S., Zhou Z., Hartmann M., Klupp Taylor R., Singh AP., Jia M., Thiel WR.:
Electrostatic grafting of a triphenylphosphine sulfonate on SBA-15: application in palladium catalyzed hydrogenation
In: Catalysis: Science and Technology 2 (2012), p. 1188-1195
ISSN: 2044-4753
DOI: 10.1039/c2cy00535b
Wang L., Shylesh S., Dehe D., Philippi T., Doerr G., Seifert A., Zhou Z., Hartmann M., Klupp Taylor R., Jia M., Ernst S., Thiel WR.:
Covalent Immobilization of Imidazolium Cations Inside a Silica Support: Palladium-Catalyzed Olefin Hydrogenation
In: ChemCatChem 4 (2012), p. 395-400
ISSN: 1867-3880
DOI: 10.1002/cctc.201100329
Wirth KE., Günther A.:
Superheated Atomization: Influence of Nozzle Geometry on Mass Flux and Spray Characteristics
In: Chemie Ingenieur Technik 84 (2012), p. 149-153
ISSN: 0009-286X
DOI: 10.1002/cite.201100142
Zhang H., Gheisi A., Sternig A., Mueller K., Schowalter M., Rosenauer A., Diwald O., Maedler L.:
Bulk and Surface Excitons in Alloyed and Phase-Separated ZnO-MgO Particulate Systems
In: ACS Applied Materials and Interfaces 4 (2012), p. 2490-2497
ISSN: 1944-8244
DOI: 10.1021/am300184b

Bahrami MR., Lobaz V., Peukert W., Korovin AV., Peschel U., Romanov SG.:
Hybrid Metal-Dielectric Photonic Crystals with Enhanced Plasmonic-Photonic Interaction
13th International Conference on Transparent Optical Networks (ICTON) (Stockholm, 26. June 2011 - 30. June 2011)
Bao H., Peukert W., Klupp Taylor R.:
One-pot colloidal synthesis of plasmonic patchy particles
In: Advanced Materials 23 (2011), p. 2644-2649
ISSN: 0935-9648
DOI: 10.1002/adma.201100698
Baumann SO., Elser MJ., Auer M., Bernardi J., Huesing N., Diwald O.:
Solid-Solid Interface Formation in TiO2 Nanoparticle Networks
In: Langmuir 27 (2011), p. 1946-1953
ISSN: 0743-7463
DOI: 10.1021/la104213d
Damm C., Mallembakam MR., Voronov A., Peukert W.:
Production of filled hydrogels by mechanochemically induced polymerization
In: Journal of Applied Polymer Science 120 (2011), p. 799-807
ISSN: 0021-8995
DOI: 10.1002/app.33102
Damm C., Peukert W.:
Mechano-chemical radical formation and polymerization initiation during wet grinding of alumina
In: Journal of Colloid and Interface Science 363 (2011), p. 386-392
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2011.07.020
Damm C., Segets D., Yang G., Vieweg B., Spiecker E., Peukert W.:
Shape Transformation Mechanism of Silver Nanorods in Aqueous Solution
In: Small 7 (2011), p. 147--156
ISSN: 1613-6829
DOI: 10.1002/smll.201001600
Faber H., Klaumünzer M., Voigt M., Galli D., Vieweg B., Peukert W., Spiecker E., Halik M.:
Morphological impact of zinc oxide layers on the device performance in thin-film transistors
In: Nanoscale 3 (2011), p. 897-899
ISSN: 2040-3364
DOI: 10.1039/C0NR00800A
URL: http://pubs.rsc.org/en/Content/ArticleLanding/2011/NR/c0nr00800a#!divAbstract
Gröschel M., Leugering G., Peukert W.:
Model Reduction, Structure-property Relations and Optimization Techniques for the Production of Nanoscale Particles
In: International Series of Numerical Mathematics (2011), p. 541-559
ISSN: 0373-3149
DOI: 10.1007/978-3-0348-0133-1_28
URL: http://link.springer.com/chapter/10.1007%2F978-3-0348-0133-1_28
Saman Hosseinpour, Jonas Hedberg, Steven Baldelli, Christofer Leygraf, Magnus:
Initial Oxidation of Alkanethiol-Covered Copper Studied by Vibrational Sum Frequency Spectroscopy
In: Journal of Physical Chemistry C (2011)
ISSN: 1932-7447
DOI: 10.1021/jp207028e
Jank M., Frey L., Peukert W., Körmer R., Wu J., Otto M.:
EPR investigations of non-oxidized silicon nanoparticles from thermal pyrolysis of silane
In: Physica Status Solidi 5 (2011), p. 244-246
ISSN: 0031-8957
DOI: 10.1002/pssr.201105208
Jovanovic J., Srikantharajah R., Lienhart H., Delgado A., Frohnapfel B., Jovanović D.:
Microflow-based control of near-wall fluctuations for large viscous drag reduction
In: Microfluidics and Nanofluidics 11 (2011), p. 773-780
ISSN: 1613-4982
DOI: 10.1007/s10404-011-0842-1
URL: http://link.springer.com/content/pdf/10.1007%2Fs10404-011-0842-1
Klupp Taylor R., Distaso M., Taccardi N., Wasserscheid P., Peukert W.:
Influence of the counterion on the synthesis of ZnO mesocrystals under solvothermal conditions
In: Chemistry - A European Journal 17 (2011), p. 2923-2930
ISSN: 0947-6539
DOI: 10.1002/chem.201002235
Gruber S., Taylor R., Scheel H., Greil P., Zollfrank C.:
Cellulose-biotemplated silica nanowires coated with a dense gold nanoparticle layer
In: Materials Chemistry and Physics 129 (2011), p. 19-22
ISSN: 0254-0584
DOI: 10.1016/j.matchemphys.2011.04.027
Klupp Taylor R., Seifrt F., Zhuromskyy O., Peschel U., Leugering G., Peukert W.:
Painting by numbers: Nanoparticle-based colorants in the post-empirical age
In: Advanced Materials 23 (2011), p. 2554-2570
ISSN: 0935-9648
DOI: 10.1002/adma.201100541
Knieke C., Romeis S., Peukert W.:
Influence of process parameters on breakage kinetics and grinding limit at the nanoscale
In: Aiche Journal 57 (2011), p. 1751--1758
ISSN: 0001-1541
DOI: 10.1002/aic.12408
Maksimenko I., Kilian D., Mehringer C., Voigt M., Peukert W., Wellmann P.:
Fabrication, charge carrier transport, and application of printable nanocomposites based on indium tin oxide nanoparticles and conducting polymer 3,4-ethylenedioxythiophene/polystyrene sulfonic acid
In: Journal of Applied Physics 110 (2011), Article No.: 104301
ISSN: 0021-8979
DOI: 10.1063/1.3658634
Marczak R., Werner F., Ahmad R., Lobaz V., Guldi DM., Peukert W.:
Detailed investigations of ZnO photoelectrodes preparation for dye sensitized solar cells
In: Langmuir 27 (2011), p. 3920-3929
ISSN: 0743-7463
DOI: 10.1021/la1042876
Mckenna KP., Koller D., Sternig A., Siedl N., Govind N., Sushko PV., Diwald O.:
Optical Properties of Nanocrystal Interfaces in Compressed MgO Nanopowders
In: ACS nano 5 (2011), p. 3003-3009
ISSN: 1936-0851
DOI: 10.1021/nn200062d
Peukert W., Damm C., Triebel C., Vasylyev S., Stara H., Özpinar C., Münstedt H., Hausmann S.:
Polyurethane/silver-nanocomposites with enhanced silver ion release using multifunctional invertible polyesters
In: Journal of Materials Chemistry 21 (2011), p. 4377-4383
ISSN: 0959-9428
DOI: 10.1039/c0jm03487h
Peukert W., Knieke C., Vozdecky P., Roosen A.:
Advanced processes for better materials-tape casting from nanoparticles
In: Chemie Ingenieur Technik 83 (2011), p. 535-544
ISSN: 0009-286X
DOI: 10.1002/cite.201000138
Peukert W., Schröder-Turk G., Mickel W., Kapfer S., Klatt M., Schaller F., Hoffmann M., Kleppmann N., Inayat A., Armstrong P., Hug D., Reichelsdorfer M., Schwieger W., Mecke K.:
Minkowski Tensor Shape Analysis of Cellular, Granular and Porous Structures
In: Advanced Materials 23 (2011), p. 2535--2553
ISSN: 0935-9648
DOI: 10.1002/adma.201100562
Peukert W., Schürer B., Hoffmann M., Wunderlich S., Peschel U., Harnau L., Ballauf M.:
Second Harmonic Light Scattering from Spherical Polyelectrolyte Brushes
In: Journal of Physical Chemistry C 115 (2011), p. 18302-18309
ISSN: 1932-7447
DOI: 10.1021/jp2064547
Peukert W., Simon S., Krause H., Weber C.:
Physical degradation of proteins in well-defined fluid flows studied within a four-roll apparatus.
In: Biotechnology and bioengineering 108 (2011), p. 2914-22
ISSN: 1097-0290
DOI: 10.1002/bit.23257
Peukert W., Wanka J.:
Optimized production of protein crystals: From 1D crystallization slot towards 2D supersaturation B22 diagram
In: Chemical Engineering & Technology 34 (2011), p. 510-516
ISSN: 0930-7516
DOI: 10.1002/ceat.201000445
Peukert W., Wasserscheid P., Hirsch A.:
From molecules to materials: The cluster of excellence "engineering of Advanced Materials" at Friedrich-Alexander University of Erlangen-Nuremberg
In: Advanced Materials 23 (2011), p. 2508-2513
ISSN: 0935-9648
DOI: 10.1002/adma.201101403
Piskorz W., Zasada F., Stelmachowski P., Diwald O., Kotarba A., Sojka Z.:
Computational and experimental investigations into N2O decomposition over MgO nanocrystals from thorough molecular mechanism to ab initio microkinetics
In: Journal of Physical Chemistry C 115 (2011), p. 22451-22460
ISSN: 1932-7447
DOI: 10.1021/jp2070826
Rumpel A., Engelhardt K., Braunschweig B., Peukert W.:
Protein adsorption at the air-water interface studied by surface vibrational spectroscopy
Engineering Sciences and Fundamentals - Core Programming Topic at the 2011 AIChE Annual Meeting (Minneapolis, MN, 16. October 2011 - 21. October 2011)
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85054616005&origin=inward
Rumpel A., Novak M., Braunschweig B., Halik M., Peukert W.:
Molecular order of mixed self-assembled monolayers studied by surface vibrational spectroscopy
Materials Engineering and Sciences Division - Core Programming Topic at the 2011 AIChE Annual Meeting
URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85054702023∨igin=inward
Rumpel A., Novak M., Walter J., Braunschweig B., Halik M., Peukert W.:
Tuning the Molecular Order of C60 Functionalized Phosphonic Acid Monolayers
In: Langmuir 27 (2011), p. 15016 - 15023
ISSN: 0743-7463
DOI: 10.1021/la203916h
URL: http://pubs.acs.org/doi/abs/10.1021/la203916h?prevSearch=%255BAllField%253A%2B%255BAllField%253A%2BTuning%2Bthe%2BMolecular%2BOrder%2Bof%2BC60%2BFunctionalized%2BPhosphonic%2BAcid%2BMonolayers%255D%255D&searchHistoryKey=
Schmidt C., Knieke C., Maier V., Höppel H., Peukert W., Göken M.:
Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement
In: Scripta Materialia 64 (2011), p. 245--248
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2010.10.013
Schmidt C., Knieke C., Maier V., Höppel HW., Peukert W., Göken M.:
Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB
In: Materials Science Forum 667-669 (2011), p. 725--730
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.667-669.725
Schürer B., Elser MJ., Sternig A., Peukert W., Diwald O.:
Delamination and Dissolution of Titanate Nanowires: A Combined Structure and in Situ Second Harmonic Generation Study
In: Journal of Physical Chemistry C 115 (2011), p. 12381--12387
ISSN: 1932-7447
DOI: 10.1021/jp203709a
Segets D., Marczak R., Schäfer S., Paula C., Gnichwitz JF., Hirsch A., Peukert W.:
Experimental and Theoretical Studies of the Colloidal Stability of Nanoparticles−A General Interpretation Based on Stability Maps
In: Acs Nano 5 (2011), p. 4658-4669
ISSN: 1936-0851
DOI: 10.1021/nn200465b
Sommer A., Cimpean CR., Kunz M., Oelsner C., Kupka HJ., Kryschi C.:
Ultrafast excitation energy transfer in vinylpyridine terminated silicon quantum dots
In: Journal of Physical Chemistry C 115 (2011), p. 22781-22788
ISSN: 1932-7447
DOI: 10.1021/jp206495j
Sternig A., Klacar S., Bernardi J., Stoeger-Pollach M., Gronbeck H., Diwald O.:
Phase separation at the nanoscale: Structural properties of BaO segregates on MgO-based nanoparticles
In: Journal of Physical Chemistry C 115 (2011), p. 15853-15861
ISSN: 1932-7447
DOI: 10.1021/jp204043g
Sugano K., Hiraoka R., Tsuchiya T., Tabata O., Klaumünzer M., Voigt M., Peukert W.:
Nanogap-controllable self-assembly of gold nanoparticles using nanotrench template
2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, TRANSDUCERS'11 (Beijing, 5. June 2011 - 9. June 2011)
DOI: 10.1109/TRANSDUCERS.2011.5969822
Toneva PI., Epple P., Breuer M., Peukert W., Wirth KE.:
Grinding in an air classifier mill - Part I: Characterisation of the one-phase flow
In: Powder Technology 211 (2011), p. 19-27
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2011.03.009
URL: http://www.sciencedirect.com/science/article/pii/S0032591011001124
Toneva PI., Wirth KE., Peukert W.:
Grinding in an air classifier mill - Part II: Characterisation of the two-phase flow
In: Powder Technology 211 (2011), p. 28-37
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2011.03.010
Vogel N, Goerres S, Landfester K, Weiss CK:
A Convenient Method to Produce Close- and Non-close-Packed Monolayers using Direct Assembly at the Air-Water Interface and Subsequent Plasma-Induced Size Reduction
In: Macromolecular Chemistry and Physics 212 (2011), p. 1719-1734
ISSN: 1022-1352
DOI: 10.1002/macp.201100187
Manzke A, Vogel N, Weiss CK, Ziener U, Plettl A, Landfester K, Ziemann P:
Arrays of size and distance controlled platinum nanoparticles fabricated by a colloidal method
In: Nanoscale 3 (2011), p. 2523-2528
ISSN: 2040-3364
DOI: 10.1039/c1nr10169b
van den Brom CR, Vogel N, Hauser CP, Goerres S, Wagner M, Landfester K, Weiss CK:
Interfacial Activity of Metal beta-Diketonato Complexes: In Situ Generation of Amphiphiles by Water Coordination
In: Langmuir 27 (2011), p. 8044-8053
ISSN: 0743-7463
DOI: 10.1021/la200836v
Vogel N, de Viguerie L, Jonas U, Weiss CK, Landfester K:
Wafer-Scale Fabrication of Ordered Binary Colloidal Monolayers with Adjustable Stoichiometries
In: Advanced Functional Materials 21 (2011), p. 3064-3073
ISSN: 1616-301X
DOI: 10.1002/adfm.201100414
Jung M, Vogel N, Koper I:
Nanoscale Patterning of Solid-Supported Membranes by Integrated Diffusion Barriers
In: Langmuir 27 (2011), p. 7008-7015
ISSN: 0743-7463
DOI: 10.1021/la200027e
Fischer J, Vogel N, Mohammadi R, Butt HJ, Landfester K, Weiss CK, Kreiter M:
Plasmon hybridization and strong near-field enhancements in opposing nanocrescent dimers with tunable resonances
In: Nanoscale 3 (2011), p. 4788-4797
ISSN: 2040-3364
DOI: 10.1039/c1nr10952a
Vogel N, Fischer J, Mohammadi R, Retsch M, Butt HJ, Landfester K, Weiss CK, Kreiter M:
Plasmon Hybridization in Stacked Double Crescents Arrays Fabricated by Colloidal Lithography
In: Nano Letters 11 (2011), p. 446-454
ISSN: 1530-6984
DOI: 10.1021/nl103120s
Vogel N, Ziener U, Manzke A, Plettl A, Ziemann P, Biskupek J, Weiss CK, Landfester K:
Platinum nanoparticles from size adjusted functional colloidal particles generated by a seeded emulsion polymerization process
In: Beilstein Journal of Nanotechnology 2 (2011), p. 459-472
ISSN: 2190-4286
DOI: 10.3762/bjnano.2.50
Vogelsberger W., Schmidt J.:
Studies of the Solubility of BaSO4 Nanoparticles in Water: Kinetic Size Effect, Solubility Product, and Influence of Microporosity
In: Journal of Physical Chemistry C 115 (2011), p. 1388-1397
ISSN: 1932-7447
DOI: 10.1021/jp105993t
Voigt M., Klaumünzer M., Ebel A., Werner F., Yang G., Marczak R., Spiecker E., Guldi DM., Hirsch A., Peukert W.:
Surface functionalization of ZnO nanorods with C60 derivatives carrying phosphonic acid functionalities
In: Journal of Physical Chemistry C 115 (2011), p. 5561-5565
ISSN: 1932-7447
DOI: 10.1021/jp112079u
Weis S., Körmer R., Jank M., Lemberger M., Otto M., Ryssel H., Peukert W., Frey L.:
Conduction Mechanisms and Environmental Sensitivity of Solution-Processed Silicon Nanoparticle Layers for Thin-Film Transistors
In: Small 7 (2011), p. 2853-2857
ISSN: 1613-6829
DOI: 10.1002/smll.201100703
Wunderlich S., Schürer B., Sauerbeck C., Peukert W., Peschel U.:
Molecular Mie model for second harmonic generation and sum frequency generation
In: Physical Review B 84 (2011)
ISSN: 0163-1829
DOI: 10.1103/PhysRevB.84.235403
Müller T., Gerhards M., Thiel W., Hemgesberg M., Dörr G., Schmitt Y., Seifert A., Zhou Z., Klupp Taylor R., Bay S., Ernst S.:
Novel acridone-modified MCM-41 type silica: Synthesis, characterization and fluorescence tuning
In: Beilstein Journal of Nanotechnology 2 (2011), p. 284-292
ISSN: 2190-4286
DOI: 10.3762/bjnano.2.33
Zhou Z., Klupp Taylor R., Kullmann S., Bao H., Hartmann M.:
Mesoporous Organosilicas With Large Cage-Like Pores for High Efficiency Immobilization of Enzymes
In: Advanced Materials 23 (2011), p. 2627-+
ISSN: 0935-9648
DOI: 10.1002/adma.201004054

D'Arienzo M., Siedl N., Sternig A., Scotti R., Morazzoni F., Bernardi J., Diwald O.:
Solar Light and Dopant-Induced Recombination Effects: Photoactive Nitrogen in TiO2 as a Case Study
In: Journal of Physical Chemistry C 114 (2010), p. 18067-18072
ISSN: 1932-7447
DOI: 10.1021/jp105426t
Damm C., Mallembakam MR., Peukert W.:
Effect of grinding conditions on mechanochemical grafting of poly(1-vinyl-2-pyrrolidone) onto quartz particles
In: Advanced Powder Technology 21 (2010), p. 50-56
ISSN: 0921-8831
DOI: 10.1016/j.apt.2009.10.007
Gnichwitz JF., Marczak R., Werner F., Lang N., Jux N., Guldi DM., Peukert W., Hirsch A.:
Efficient synthetic access to cationic dendrons and their application for ZnO nanoparticles surface functionalization: New building blocks for dye-sensitized solar cells
In: Journal of the American Chemical Society 132 (2010), p. 17910-17920
ISSN: 0002-7863
DOI: 10.1021/ja106076h
Groenewegen V., Kuntermann V., Haarer D., Kunz M., Kryschi C.:
Excited-state relaxation dynamics of 3-vinylthiophene-terminated silicon quantum dots
In: Journal of Physical Chemistry C 114 (2010), p. 11693-11698
ISSN: 1932-7447
DOI: 10.1021/jp100266w
Klupp Taylor R., Bao H., Vasylyev S., Peukert W., Tian C.:
Facile route to morphologically tailored silver patches on colloidal particles
In: Langmuir 26 (2010), p. 13564-13571
ISSN: 0743-7463
DOI: 10.1021/la102284w
Knieke C., Berger A., Peukert W.:
Graphene production with stirred media mills
2010 MRS Spring Meeting (San Francisco, CA, 5. April 2010 - 9. April 2010)
DOI: 10.1557/PROC-1259-S12-01
Knieke C., Berger A., Voigt M., Klupp Taylor R., Röhrl J., Peukert W.:
Scalable production of graphene sheets by mechanical delamination
In: Carbon 48 (2010), p. 3196-3204
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2010.05.003
Knieke C., Carola S., Romeis S., Peukert W., Breitung-Faes S., Kwade A.:
Nanoparticle production with stirred-media mills: Opportunities and limits
In: Chemical Engineering & Technology 33 (2010), p. 1401-1411
ISSN: 0930-7516
DOI: 10.1002/ceat.201000105
Körmer R., Jank M., Ryssel H., Schmid HJ., Peukert W.:
Aerosol synthesis of silicon nanoparticles with narrow size distribution-Part 1: Experimental investigations
In: Journal of Aerosol Science 41 (2010), p. 998--1007
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2010.05.007
Körmer R., Schmid HJ., Peukert W.:
Aerosol synthesis of silicon nanoparticles with narrow size distribution-Part 2: Theoretical analysis of the formation mechanism
In: Journal of Aerosol Science 41 (2010), p. 1008--1019
ISSN: 0021-8502
DOI: 10.1016/j.jaerosci.2010.08.002
Mahajeri M., Voigt M., Klupp Taylor R., Reindl A., Peukert W.:
Evaluation of the film formation and the charge transport mechanism of indium tin oxide nanoparticle films
In: Thin Solid Films 518 (2010), p. 3373-3381
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2009.10.119
Marczak R., Segets D., Voigt M., Peukert W.:
Optimum between purification and colloidal stability of ZnO nanoparticles
In: Advanced Powder Technology 21 (2010), p. 41--49
ISSN: 0921-8831
DOI: 10.1016/j.apt.2009.10.005
Novak M., Jäger C., Rumpel A., Kropp H., Peukert W., Clark T., Halik M.:
The morphology of integrated self-assembled monolayers and their impact on devices – A computational and experimental approach
In: Organic Electronics 11 (2010), p. 1476-1482
ISSN: 1566-1199
DOI: 10.1016/j.orgel.2010.05.009
URL: http://www.sciencedirect.com/science/article/pii/S1566119910001692
Peukert W., Higashitani K., Marczak R.:
Special Issue of Core-to-Core Young Researchers Meeting 2008 Preface
In: Advanced Powder Technology 21 (2010), p. 1
ISSN: 0921-8831
DOI: 10.1016/j.apt.2009.12.012
Peukert W., Marczak R., Schäfer S., Segets D.:
Stabilization mechanism of ZnO quantum dots
Nanotechnology 2010: Advanced Materials, CNTs, Particles, Films and Composites - 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010 (

Journal Articles

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010