Gomez, Juan (M.Sc.)
Juan Gomez, M. Sc.
Born: 1989 in Bogota, Colombia
- February 2007 – March 2013
Studies of chemical Engineering, Universidad Nacional de Colombia, Bogota, Colombia
Bachelor Thesis: Synthesis and characterization of La-Ni Perowskites
- March 2013-September 2013 R&D Engineer at Quala S.A., Bogota, Colombia
- October 2013 – December 2015
Studies of Chemical Energy Engineering, Friedrich-Alexander Universität Erlangen-Nürnberg
Master Thesis: Experimental investigation of the solids concentration in high-concentrated riser-reactors by means of computer tomography.
- Since February 2016
Scientific Assistant at the Institute of Particle Technology, Solids Processing Group
Functionalization of polymer powders for additive manufacturing
- Particle rounding
- Chemical functionalization of polymer via PECVD
- Plasma treatment of polymer powders
A full list can be found here.
- Dechet, M., Gomez Bonilla, J.S., Grünewald, M., Popp, K., Rudloff, J., Lang, M., & Schmidt, J. (2021). A novel, precipitated polybutylene terephthalate feedstock material for powder bed fusion of polymers (PBF): Material development and initial PBF processability. Materials & Design, 197. https://dx.doi.org/10.1016/j.matdes.2020.109265
- Gomez Bonilla, J.S., Düsenberg, B., Lanyi, F., Schmuki, P., Schubert, D.W., Schmidt, J.,... Bück, A. (2021). Improvement of polymer properties for powder bed fusion by combining in situ PECVD nanoparticle synthesis and dry coating. Plasma Processes and Polymers. https://dx.doi.org/10.1002/ppap.202000247
- Dechet, M., Demina, A., Römling, L., Gomez Bonilla, J.S., Lanyi, F., Schubert, D.W.,... Schmidt, J. (2020). Development of poly(L-lactide) (PLLA) microspheres precipitated from triacetin for application in powder bed fusion of polymers. Additive Manufacturing, 32. https://dx.doi.org/10.1016/j.addma.2019.100966
- Gomez Bonilla, J.S., Szymczak, T., Zhou, X., Schrüfer, S., Dechet, M., Schmuki, P.,... Bück, A. (2020). Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization. Additive Manufacturing, 34. https://dx.doi.org/10.1016/j.addma.2020.101373
- Gomez Bonilla, J.S., Dechet, M., Schmidt, J., Peukert, W., & Bück, A. (2020). Thermal rounding of micron-sized polymer particles in a downer reactor: direct vs indirect heating. Rapid Prototyping Journal. https://dx.doi.org/10.1108/RPJ-01-2020-0008